300hp ka24de-t almost complete swap for sale

[PowerDrifter]

hey guys im selling my kit and going v8


Comes with

stock ka24de engine
engine harness
bunny white clutch setup rated at 350Hp (15 miles)
boost gauge
aem wideband (15 miles)
authentic hks bov
direct fit intercooler kit
z32 maf and pigtail
cx racing dopwnpipe
jdm turbo. works fine. hit 11psi, no smoke or anything
turbonetics watstegate with dumputube hitting 11psi
enjukie catch can ( new! never even hooked it up all the way)
550 sti injectors direct drop in ka fuel rail already put in (new o rings) (out of 60k sti)
turbo blanket (pretty new)
emance ecu for sr injectors, t3 turbo and stock maf
nistune ecu ready to tune ( natural aspirations) tunes $100 per hour so 2hours and you can have a very reliable ka24de
http://i426.photobucket.com/albums/pp345/j108077854/20140217_170241.jpg

ok so the engine was just rebuilt but its making a funny noise from somewhere cant quite locate it and im tired of putting money into and going v8. as you can see the wiring is all messed up because it was ghetto rigged wiring and i bought a new ka24de wiring that was supposebly working and its not and that was the last straw so im selling it and going simple v8

almost everything is new because as you can see it was barely even ran. everything works 100% except the problem with the engine or could be just the wiring i dont know

To finish this setup you need
walboro fuel pump
a radiator
ka tranny
catback exhaust
a tune if using nistune or just get a stock maf and sr injectors and slap the emance on

price lowered! lowest ill take or ill just part out and make more money but i rather have someone take it whole as fitment and everything is already done

Asking $1600

[street240sx]

,decent pricing glws

[chuki monsta s13]

How much for just motor and trans no turbo stuff and info on what it was built with overbore?? pm me

[PowerDrifter]

,decent pricing glws
thanks

How much for just motor and trans no turbo stuff and info on what it was built with overbore?? pm me

motor was rebuilt stock and not selling transmission only clutch


price lowered! lowest ill take or ill just part out and make more money but i rather have someone take it whole as fitment and everything is already done

[jdm14]

Is the ecu s13 or s14? Pm me.


Sent from my iPhone using Tapatalk

[jhon-s13]

How much for the kit turbo and shipping 77053

[PowerDrifter]

Is the ecu s13 or s14? Pm me.

pmed you and for everyone its an s13


Sent from my iPhone using Tapatalk

How much for the kit turbo and shipping 77053

name everything you want specifically and ill give you a quote

[240sxkid223]

Where are you located


Sent from my iPhone using Tapatalk

[iamtheyi]

recording of this funny noise? It's not rod knock is it?

[dbulldog1992]

The nistune ecu, for s13? S14? How much? And also how much for the wideband

[PowerDrifter]

Where are you located

long beach CA
Sent from my iPhone using Tapatalk

recording of this funny noise? It's not rod knock is it?

my mechanic said its something he cant point out and he rebuilds engines so idk. ill try to get a vid

The nistune ecu, for s13? S14? How much? And also how much for the wideband
nistune for s13 and ill only part the motor from turbo kit right now. if i dont get a buyer in like a week ill start parting out parts if i have enough interest in different parts

Willing to ship now! friend will show me since i dont know how to ship big parts. everything except motor

[anti tyler]

since you got butt hurt I'll edit this.

[PowerDrifter]

So many ebay parts, so high of a price....

Whats the turbo brand? Whats the exhaust manifold brand? Whats the boost gauge brand? Whats the intercooler brand/size/est power rating?

All legit questions, If you're seriously asking $1600 for all these no name parts, man I would just part it out.

BTW: Don't ever suggest someone uses a stock KA mass airflow sensor with a turbo setup, that is a VERY incorrect thing to use on a turbo setup.

Go ahead and post a video of that noise, sounds like (without hearing the noise) whoever rebuilt that motor for you didn't know what they were doing. Suggesting, if it didn't make the noise before a rebuilt.



i dont see that many ebay parts but hey if you wanna replicate this setup let me break it down for you

stock ka24de engine
engine harness
bunny white clutch setup rated at 350Hp $300
boost gauge $60
aem wideband $200
authentic hks bov $200
direct fit intercooler kit $200
z32 maf and pigtail $80
cx racing dopwnpipe $200
jdm turbo. works fine. hit 11psi, no smoke or anything $200
turbonetics watstegate with dumputube hitting 11psi $200
enjukie catch can $80
550 sti injectors direct drop in ka fuel rail $200
turbo blanket (pretty new) $40
emance ecu for sr injectors, t3 turbo and stock maf $200
nistune ecu ready to tune $300

Thats $2460!
i didnt even include a price on the engine !

are you seriously b!tching about boost gauge and intercooler brand? even hardcore brand boys will tell you that an offbrand intercooler is just fine and why the hell would i pay more for just a name. Same with boost gauge. Its a meter that works.

BTW: Don't ever suggest someone uses a stock KA mass airflow sensor with a turbo setup, that is a VERY incorrect thing to use on a turbo setup.

thats funny because when i was researching and there was a reputable shop dynoing at 300hp with stock maf saying it wasent maxed out yet. But i agree that kinda pushing it and I honestly would play it safe and get a z32 which i have and the reason i said get a stock maf was because that ecu was tuned for it. If you dont like it go complain to jim wolf and enthalphy that all provide tunes with that maf and they know what their doing more than you

Go ahead and post a video of that noise, sounds like (without hearing the noise) whoever rebuilt that motor for you didn't know what they were doing. Suggesting, if it didn't make the noise before a rebuilt.

he has many years experience as an engine builder. its a funny noise and im working on getting video. But the funny thing is your basically getting the engine for free so i dont know why your b!itching

seriously if you think my price is too high then go buy this you cheapskate for not quality brand parts and leave my thread

http://www.ebay.com/itm/91-94-240SX-S13-KA24DE-Full-Turbo-kit-KA24DE-T-NEW-/180691433978?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a120c79fa&vxp=mtr

now i wasted way too much time with you and wont be replying to you in the future as i made my point and this is a fs thread, no room to be arguing so if you dont like it just leave

$1600 minimum ill take for everything but ill part out the turbo kit from engine for less as long as your taking most of the stuff

[anti tyler]

Thank link is basically what your setup is lol. I'm sorry you felt the need to rant to me about what I said. But if typing a few sentences is too hard for you to do, I apologize.

I pieced my own setup together for less than $1600 thank you, I was simply asking for your branding on things, an ebay intercooler core is one thing, but a $200 ebay turbo is another. You're suggesting you're selling 2 ECU's for one car... Jacking the price up for no reason, and stating you wont part out unless you can't sell the whole sha-bang.

Just part the thing out and be done with it. That's all I said in the first place. I don't give two- that your parts are majority knock off things. Who cares?

I'll tell you now though, that if you're paying $60-no named boost gauge $80-MAF $200-wideband $200-downpipe $80-catch can & $200 for 550cc side feeds, you sir, can get all that for a fraction of the cost. $820 for all that?

Injectors $139
http://www.ebay.com/itm/Nissan-200SX-240SX-set-of-4-550cc-Plug-Play-side-feed-fuel-injectors-/131120267344?pt=Race_Car_Parts&hash=item1e87608050&vxp=mtr

Catch can $8
http://www.ebay.com/itm/BLACK-TURBO-OIL-CATCH-CAN-TANK-RESERVOIR-750ML-JDM-ALUMINUM-DRIFT-PERFORMANCE-/280769839786?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A240SX&hash=item415f2fc2aa&vxp=mtr

Catch can Similar to yours $33
http://www.ebay.com/itm/AJP-Universal-Aluminum-Square-Oil-Cylinder-Catch-Reservoir-Tank-Can-Kit-Red-/200962404916?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A240SX&hash=item2eca4af234&vxp=mtr

T3/T4 turbo $139
http://www.ebay.com/itm/T3-T4-T04E-Turbocharger-Turbo-57-A-R-Universal-Fitment-/261395807469?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A240SX&hash=item3cdc677ced&vxp=mtr

To4e (if you wanna get bigger) $129
http://www.ebay.com/itm/T04E-T3-T4-57-A-R-STAGE-III-ANTI-SURGE-TURBO-COMPRESSOR-BEARING-TURBOCHARGER-/231054630773?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A240SX&hash=item35cbeddf75&vxp=mtr


Boost gauge (doesn't look bad either!!) $29.99
http://www.ebay.com/itm/ADD-W1-52mm-Turbo-Boost-Gauge-T3-T4-water-oil-Temperature-volt-RED-Digital-x1-/111122813330?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A240SX&hash=item19df6f9192&vxp=mtr

Downpipe $119
http://www.ebay.com/itm/GODSPEED-89-94-95-98-240sx-silvia-s13-s14-sr20-ka24-top-mount-3-turbo-downpipe-/131111851341?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e86e0154d&vxp=mtr

Oh crap, Full downpipe $149.99
http://www.ebay.com/itm/1989-240SX-S13-S14-T3-T3-T4-5-Bolts-SR20DET-3-Top-Mount-High-Flow-Down-Pipe-/180878297991?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A240SX&hash=item2a1d2fcb87&vxp=mtr

Innovate wideband $151 WITH FULL FACTORY WARRANTY?!?!
http://www.ebay.com/itm/Innovate-3844-MTX-L-wideband-AFR-UEGO-gauge-kit-NEW-/271270570096?pt=Motors_Car_Truck_Parts_Accessories&hash=item3f28fc6870&vxp=mtr


Oh shoot, AEM wideband $152?? WITH FULL FACTORY WARRANTY?!?!
http://www.ebay.com/itm/AEM-UEGO-Digital-Wideband-O2-Air-Fuel-Ratio-AFR-Gauge-6-in-1-WBO2-Kit-30-4100-/291067221796?pt=Motors_Car_Truck_Parts_Accessories&hash=item43c4f55724&vxp=mtr


MAF $50??
http://www.ebay.com/itm/Mass-Air-Flow-Sensor-Meter-MAF-Nissan-Infiniti-J30-300ZX-Z32-22680-30P00-New-/300980369844?pt=Motors_Car_Truck_Parts_Accessories&hash=item4613d3f9b4&vxp=mtr



I wasn't trying to be a dick my man, by any means, but you were a complete prick with that reply. Do your thing, GLWS, Wish you the best with your V8 build.

[PowerDrifter]

Thank link is basically what your setup is lol. I'm sorry you felt the need to rant to me about what I said. But if typing a few sentences is too hard for you to do, I apologize.

I pieced my own setup together for less than $1600 thank you, I was simply asking for your branding on things, an ebay intercooler core is one thing, but a $200 ebay turbo is another. You're suggesting you're selling 2 ECU's for one car... Jacking the price up for no reason, and stating you wont part out unless you can't sell the whole sha-bang.

Just part the thing out and be done with it. That's all I said in the first place. I don't give two- that your parts are majority knock off things. Who cares?

I'll tell you now though, that if you're paying $60-no named boost gauge $80-MAF $200-wideband $200-downpipe $80-catch can & $200 for 550cc side feeds, you sir, can get all that for a fraction of the cost. $820 for all that?

Injectors $139
http://www.ebay.com/itm/Nissan-200SX-240SX-set-of-4-550cc-Plug-Play-side-feed-fuel-injectors-/131120267344?pt=Race_Car_Parts&hash=item1e87608050&vxp=mtr

Catch can $8
http://www.ebay.com/itm/BLACK-TURBO-OIL-CATCH-CAN-TANK-RESERVOIR-750ML-JDM-ALUMINUM-DRIFT-PERFORMANCE-/280769839786?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A240SX&hash=item415f2fc2aa&vxp=mtr

Catch can Similar to yours $33
http://www.ebay.com/itm/AJP-Universal-Aluminum-Square-Oil-Cylinder-Catch-Reservoir-Tank-Can-Kit-Red-/200962404916?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A240SX&hash=item2eca4af234&vxp=mtr

T3/T4 turbo $139
http://www.ebay.com/itm/T3-T4-T04E-Turbocharger-Turbo-57-A-R-Universal-Fitment-/261395807469?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A240SX&hash=item3cdc677ced&vxp=mtr

To4e (if you wanna get bigger) $129
http://www.ebay.com/itm/T04E-T3-T4-57-A-R-STAGE-III-ANTI-SURGE-TURBO-COMPRESSOR-BEARING-TURBOCHARGER-/231054630773?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A240SX&hash=item35cbeddf75&vxp=mtr


Boost gauge (doesn't look bad either!!) $29.99
http://www.ebay.com/itm/ADD-W1-52mm-Turbo-Boost-Gauge-T3-T4-water-oil-Temperature-volt-RED-Digital-x1-/111122813330?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A240SX&hash=item19df6f9192&vxp=mtr

Downpipe $119
http://www.ebay.com/itm/GODSPEED-89-94-95-98-240sx-silvia-s13-s14-sr20-ka24-top-mount-3-turbo-downpipe-/131111851341?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e86e0154d&vxp=mtr

Oh crap, Full downpipe $149.99
http://www.ebay.com/itm/1989-240SX-S13-S14-T3-T3-T4-5-Bolts-SR20DET-3-Top-Mount-High-Flow-Down-Pipe-/180878297991?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A240SX&hash=item2a1d2fcb87&vxp=mtr

Innovate wideband $151 WITH FULL FACTORY WARRANTY?!?!
http://www.ebay.com/itm/Innovate-3844-MTX-L-wideband-AFR-UEGO-gauge-kit-NEW-/271270570096?pt=Motors_Car_Truck_Parts_Accessories&hash=item3f28fc6870&vxp=mtr


Oh shoot, AEM wideband $152?? WITH FULL FACTORY WARRANTY?!?!
http://www.ebay.com/itm/AEM-UEGO-Digital-Wideband-O2-Air-Fuel-Ratio-AFR-Gauge-6-in-1-WBO2-Kit-30-4100-/291067221796?pt=Motors_Car_Truck_Parts_Accessories&hash=item43c4f55724&vxp=mtr


MAF $50??
http://www.ebay.com/itm/Mass-Air-Flow-Sensor-Meter-MAF-Nissan-Infiniti-J30-300ZX-Z32-22680-30P00-New-/300980369844?pt=Motors_Car_Truck_Parts_Accessories&hash=item4613d3f9b4&vxp=mtr



I wasn't trying to be a dick my man, by any means, but you were a complete prick with that reply. Do your thing, GLWS, Wish you the best with your V8 build.


Thank link is basically what your setup is lol. I'm sorry you felt the need to rant to me about what I said. But if typing a few sentences is too hard for you to do, I apologize.


Im not butthurt but i have to defend myself because your devaluing my kit which i spent so much money on.

Replying isnt hard, its your stupidity that giving me a headache. ever heard of this quote?
"Never argue with stupid people, they will drag you down to their level and beat you with experience." - Mark Twain

I'll tell you now though, that if you're paying $60-no named boost gauge $80-MAF $200-wideband $200-downpipe $80-catch can & $200 for 550cc side feeds, you sir, can get all that for a fraction of the cost. $820 for all that?


Like seriously did you just complain about ebay parts and then try to say you can piece the same kit with cheaper but you used some of the crappiest part available?

Injectors $139
http://www.ebay.com/itm/Nissan-200SX-240SX-set-of-4-550cc-Plug-Play-side-feed-fuel-injectors-/131120267344?pt=Race_Car_Parts&hash=item1e87608050&vxp=mtr

your cheaper alternative injectors are guaranteed to blow your engine. i Have real sti injectors with only 60k on them. dont believe me?

http://www.sr20-forum.com/product-reviews/68795-tlf-performance-injectors-thumbs-way-way-down.html

Catch can $8
http://www.ebay.com/itm/BLACK-TURBO-...2fc2aa&vxp=mtr

Catch can Similar to yours $33
http://www.ebay.com/itm/AJP-Universa...4af234&vxp=mtr

ok you found a cheaper catch can then me but mine is real from enjukie and your the same person complaining about using cheap parts when i said its fine as long as its functional

Downpipe $119
http://www.ebay.com/itm/GODSPEED-89-...e0154d&vxp=mtr

Oh crap, Full downpipe $149.99
http://www.ebay.com/itm/1989-240SX-S...2fcb87&vxp=mtr

ok you found a cheaper downpipe. cool but hows the fitment? you know the biggest complaint with going ka24det is fitment of the manifold and turbo hitting the brake master cylinder

now i priced mine at $200 and look how much it really goes for

http://www.cxracing.com/mm5/merchant.mvc?Screen=PROD&Store_Code=CXR&Product_Code=TRB-KIT-KA24DE-MF-DP-5BF&Category_Code=Engine_KA24DE

$450! and as you can see in my picture fitment is perfect clearing the brake
master and distributor

Innovate wideband $151 WITH FULL FACTORY WARRANTY?!?!
http://www.ebay.com/itm/Innovate-384...fc6870&vxp=mtr


Oh shoot, AEM wideband $152?? WITH FULL FACTORY WARRANTY?!?!
http://www.ebay.com/itm/AEM-UEGO-Dig...f55724&vxp=mtr


i have an aem wideband. its more than $200 on their site and i priced mine lower than new because its used. I only said $200 because thats what it costed me and mine only has 15 miles on it


MAF $50??
http://www.ebay.com/itm/Mass-Air-Flo...d3f9b4&vxp=mtr

i dont see a pigtail and dont see other on zilvia selling for less

like i said your stupidity is giving me a headache because your misleading people on what the parts actually cost. you complain about very few cheap parts on my kit and then say my price is too high and can piece your own for cheaper with even more shitty parts

My parts are real parts where they matter. Like injectors where your engine wont lean out, nistune to have a good tune, authentic hks blow off valve so it works and wont make your car idle funny, z32 maf for more air. expensive manifold and downpipe so you wont have fitment issuses and then your still getting a free engine

people these days...

[PowerDrifter]

bump number 1

[anti tyler]

You said you wouldn't waste your time in the first place yet you did, you then again said you wouldn't reply. And you did lol.

Now you're calling me stupid, but you're again wasting your time. And you can't really call someone stupid when you, yourself, do not know how to use proper grammar.

[noizyboy240sx]

so is this still 4 sale?

[brandonnn1002]

what is enjukie?
I thought that was a typo for ENJUKU, but you continued to use the same word..

[brandonnn1002]

And PS a catch can is a catch can is a catch can...I have the same exact looking one in my garage painted candy apple red that I'd sell for the first $10 to come to me. Also, MAFs are not that expensive, even with a pig tail. I can go to the junk yard right now and get one for $35 WITH pigtail. STI injectors also go for around $150ish, so $200 isn't a bad starting price as long as you're willing to go lower. I have personally bought a set for $100. AEM widebands are like $160 on eBay, too, witha full factory warranty. Of course it's priced more on AEM, it's their site. Name brand sites are always marked way up from what the actual part costs. The turbo also isn't TERRIBLE...CX racing is the "higher end eBay stuff," but with that being said, it's still eBay. Also, how much is a rebuilt KA to you? I have a fully built long block in my garage complete with a/c compressor, ps pump, alternator, and distributer that I have up for $800 obo.
To each their own, but I personally wouldn't pay $1600 for all of this. Just my 2 cents, not trying to be rude..I'm just saying that you paid a bit too much for the things that you have for sale if that indeed is the actual price paid.
As was stated earlier by another member, GLWS, and your v8 swap.
Hell yeah on +4 more cylinders.

[POScoupe]

Waiting on that noise video


Sent from my iPhone using Tapatalk

[Kingtal0n]

Still dont know what manifold its running

[ZaK687]

Would you part with the intercooler piping? Pm me

[psychos13]

willing to partout nistune ecu