SR20 into 240sx (wiring)

[Derko]

I'm trying to do the wiring for my SR swap but I have run into a problem. As
you can see, the OEM KA harness is about a 0.5/10 and I think a few plugs are
even missing. The instructions on FR Sport say to cut these last three clips
from the JDM harness and replace them with clips from the KA
harness...but...WTF am I supposed to swap them out for?

JDM SR20 harness:
http://i58.tinypic.com/2a0dvg1.jpg

POS 0.5/10 KA24DE harness:
http://i59.tinypic.com/35laulk.jpg

http://i57.tinypic.com/16bwkk2.jpg

http://i59.tinypic.com/2r3l9ww.jpg

http://i62.tinypic.com/2ijl0fd.jpg

[Derko]

bumppppppp

[bmxer882x]

Ur looking at the body harness. U need the jackpot engine harness for the plugs u need.

[Derko]

Ur looking at the body harness. U need the jackpot engine harness for the plugs u need.

I know this. What I am asking for is which plugs. I can't find the plugs on the engine harness that would mate to the fuse box. I wasn't the one who pulled the KA engine harness.

Gonna look at a video though so hopefully this gives me the answer I need.

[itz matthew xP]

the first pic, you will need to cut a splice using to the plugs from the KA engine harness. those plugs will connect to the chassis body harness which is located next to the where the battery sits.

[itz matthew xP]

everything else will be plug and play. or if you don't mind spending the extra bit of money go with wiringspeciaties.com

[Kingtal0n]

What year 240sx?

And I am guessing a redtop sr20det

If the year of the 240 is 89-94 its really simple. The plugs you are looking for are on the engine harness, extending into the space around the battery (by the passenger headlight).
Should take 35 minutes to wire up properly, soldier heat shrink etc... done.

[Meech]

You mentioned that you had found a video so I'm pretty sure you mean the one I got this screen shot from. In that case, hopefully you already soldered these clips onto your SR harness.

http://i61.tinypic.com/v615s9.jpg

They are located on the passenger side of the harness all by themselves in about 3ft of wiring. Should be easy to spot.

--------------------

Can't believe it took this long to get such a reply though. This place is about as bad as Honda-Tech...

[Derko]

http://i57.tinypic.com/sd0js8.jpg
http://i60.tinypic.com/1gsjgx.jpg
thanks guys :]

[wiring specialties]

Hey man, if you end up needing any connectors or just decide to replace the whole harness let us know because we have them all in stock.

-Brandon