mikeroy420
06-08-2004, 04:15 PM
I had my sr running and there is a squealing noise and smoke coming from the bell housing. I have to take the transmission apart again to find the problem. Can anyone confirm the torque specs that I have are correct for an S13 blacktop SR20DET.
Pressure Plate to Flywheel : 33 ft lbs
Flywheel torque specs : 80-90 ft lbs
Bell housing bolts:
1..............51-59 lbs.............2.68 inches (68mm)
2..............51-59 lbs.............2.48 inches (63mm)
3..............51-59 lbs.............3.07 inches (78mm)
4..............22-29 lbs.............2.36 inches (60mm)
5..............22-29 lbs.............1.18 inches (30mm)
In the following pattern, starting with the top starter bolt (type 3) and
proceeding down to the bottom starter bolt (type 3) and then around the bell
housing.
3,3,4,5,4,4,2,1,1,2,2.
Please feel free to add anything I'm missing. Thanks for the help.
Pressure Plate to Flywheel : 33 ft lbs
Flywheel torque specs : 80-90 ft lbs
Bell housing bolts:
1..............51-59 lbs.............2.68 inches (68mm)
2..............51-59 lbs.............2.48 inches (63mm)
3..............51-59 lbs.............3.07 inches (78mm)
4..............22-29 lbs.............2.36 inches (60mm)
5..............22-29 lbs.............1.18 inches (30mm)
In the following pattern, starting with the top starter bolt (type 3) and
proceeding down to the bottom starter bolt (type 3) and then around the bell
housing.
3,3,4,5,4,4,2,1,1,2,2.
Please feel free to add anything I'm missing. Thanks for the help.