alkemyst
06-08-2004, 06:32 AM
I am looking for the wiring from the headlight switch and where it passes near the passenger side engine fuse box. I need the Red / Blue that goes to the parking light.
What I'd like to do is test if I can pull the lead inline and run it into the low beam side of the fog light relay 2 then disable the high beam input on the fog light relay 2. This should allow the fogs to be on with parking lights, lows and/or highs.
Another thought is to find switched 12V and run that to the low beam input on the fog light relay 2 and that would allow the fogs to be independent of all other lights (you'd still have to disable the high beam signal or they will turn off with high beams).
Once I figure it all out I think I can get by with two very short jumpers instead of running a long piece of wire from the parking lights and back.
What I'd like to do is test if I can pull the lead inline and run it into the low beam side of the fog light relay 2 then disable the high beam input on the fog light relay 2. This should allow the fogs to be on with parking lights, lows and/or highs.
Another thought is to find switched 12V and run that to the low beam input on the fog light relay 2 and that would allow the fogs to be independent of all other lights (you'd still have to disable the high beam signal or they will turn off with high beams).
Once I figure it all out I think I can get by with two very short jumpers instead of running a long piece of wire from the parking lights and back.