PDA

View Full Version : AZ FueLAB prodigy fuel pump


beems240sx
02-05-2014, 01:51 PM
I'm selling my FueLAB prodigy 41402 fuel pump. Rated to 1300hp on high setting. Only has about 1500 miles on it. Comes with -8an earls fittings. $350

http://i129.photobucket.com/albums/p204/beemsmx6/Mobile%20Uploads/image_zps660c9338.jpg (http://s129.photobucket.com/user/beemsmx6/media/Mobile%20Uploads/image_zps660c9338.jpg.html)

http://i129.photobucket.com/albums/p204/beemsmx6/Mobile%20Uploads/image_zpsbc3a0d7e.jpg (http://s129.photobucket.com/user/beemsmx6/media/Mobile%20Uploads/image_zpsbc3a0d7e.jpg.html)

http://i129.photobucket.com/albums/p204/beemsmx6/Mobile%20Uploads/image_zpsb733eb67.jpg (http://s129.photobucket.com/user/beemsmx6/media/Mobile%20Uploads/image_zpsb733eb67.jpg.html)

EvilEgg13
02-05-2014, 08:23 PM
What didn't you like about it?

beems240sx
02-05-2014, 09:51 PM
It was a bit loud for me. Just overkill for my setup and I'm downsizing power further so really just didn't need it!

beems240sx
02-10-2014, 03:15 PM
To the top!

02-11-2014, 12:14 PM
As per the install directions, it needs to have a -10 pickup. Stepping down after the pump is fine, but it needs a -10 on the inlet side. The sound was most likely due to the fact that the pump was cavitating. Pumps (not just ours- any brand) can push pressure, but they don't like to work to get their fuel. Anything you can do to reduce the inlet restriction on a pump, the better it's going to work- higher flow, less noise, less heat, and a longer life.

beems240sx
02-11-2014, 01:19 PM
As per the install directions, it needs to have a -10 pickup. Stepping down after the pump is fine, but it needs a -10 on the inlet side. The sound was most likely due to the fact that the pump was cavitating. Pumps (not just ours- any brand) can push pressure, but they don't like to work to get their fuel. Anything you can do to reduce the inlet restriction on a pump, the better it's going to work- higher flow, less noise, less heat, and a longer life.

Well you learn something new everyday! And thanks for the thread bump (: I do really like the rest of my fuelab products. Everything is top notch and looks fantastic

beems240sx
02-18-2014, 06:22 PM
To the top!

beems240sx
02-22-2014, 07:36 PM
Bump it up

beems240sx
04-01-2014, 08:35 PM
Bump still have this

beems240sx
04-15-2014, 07:07 AM
To the top!!!!!

beems240sx
07-29-2014, 12:38 AM
Bump still have this fuel pump!