Built R33 RB26 ready to go.

[beat92240]

SOLLLLLLDDDDD!!!!!!

R33 RB26
Ross Metal Jacket Harmonic Balancer
N1 Oil Pump
N1 Water Pump
N1 Crank
Nismo Thermostat
ARP Main Studs
ARP Rod Bold Kit
ARP Head Studs
Custom Aluminum RWD Oil Pan
Brian Crower bROD H Beam Rods
ACL Race Rod Bearings
ACL Race Main Bearings
Cometic Head Gasket
ISIS Oil Cooler Kit
RB Oil Filter Stud Conversion
Greddy Cam Timing Gears
Greddy Timing Belt
Greddy Oil Filter
Greddy 11MM Fuel Rail
HKS 272 Step 1 Intake and Exhaust Cams
Tomei Cam Cap Studs
Manley Valve Springs, Titanium Retainers, and Locks
Ferrea Super Alloy Turbo Exhaust Valves
Ferrea Special Alloy Intake Valves
JE Pistons (0.020 over)
Custom S13 3 Inch V-band Downpipe wrapped in DEI LR Heat Shield
Clear Timing Belt Cover
SPEC Twin Plate Clutch Mini
Injector Dynamics 1000 CC 11 MM Injectors
Weld on -12 AN bungs on valve covers
Labor to disassemble motor and package head for shipping
Bake, shot blast, and wash engine block
Algin Hone Mains
Bore + Finish Hone Cylinders
Surface Deck
Brass Freeze Plug Kit
Balance Rotating Assembly
Assemble Ultra Performance Long Block
Line Bore head and return freight
Competition Valve Job
Surface Cylinder Head
K+L Valve Adjustment Shims
Misc. Stainless Steel Fasteners and Hardware
Full Race EFR IWG Twin Scroll T4 Manifold
Full Race 2000 Degree Heat Coating on Manifold
Borg Warner EFR 8374 .92 AR T4 Twin Scroll
Full Race EFR Billet Blow Off Valve Cover
Full Race 2000 Degree Heat Coating on Turbo
DEI T4 Titanium Turbo Shield
Greddy Intake Manifold

The above is all the more I'm willing to break it down. NO I will not sell just the injectors, or the oil pump, etc etc. Its either like listed above or nothing.
Package deal of the whole thing for $14,000 ONO. I would like to have a pickup in Western PA just north of Pittsburgh.

Call or text 412.37zero.3zero94 for quickest reply.

When I bought it:
http://i763.photobucket.com/albums/xx280/343blueR32/260sx%20build/000_0138.jpg (http://s763.photobucket.com/user/343blueR32/media/260sx%20build/000_0138.jpg.html)

http://i763.photobucket.com/albums/xx280/343blueR32/260sx%20build/IMG_0332.jpg (http://s763.photobucket.com/user/343blueR32/media/260sx%20build/IMG_0332.jpg.html)
http://i763.photobucket.com/albums/xx280/343blueR32/260sx%20build/IMG_0333.jpg (http://s763.photobucket.com/user/343blueR32/media/260sx%20build/IMG_0333.jpg.html)
http://i763.photobucket.com/albums/xx280/343blueR32/260sx%20build/100_0198.jpg (http://s763.photobucket.com/user/343blueR32/media/260sx%20build/100_0198.jpg.html)
http://i763.photobucket.com/albums/xx280/343blueR32/260sx%20build/100_0200.jpg (http://s763.photobucket.com/user/343blueR32/media/260sx%20build/100_0200.jpg.html)
http://i763.photobucket.com/albums/xx280/343blueR32/260sx%20build/100_0201.jpg (http://s763.photobucket.com/user/343blueR32/media/260sx%20build/100_0201.jpg.html)
http://i763.photobucket.com/albums/xx280/343blueR32/260sx%20build/Intake.jpg (http://s763.photobucket.com/user/343blueR32/media/260sx%20build/Intake.jpg.html)

Just to show the clutch, but this was with my original twin turbo setup:
http://i763.photobucket.com/albums/xx280/343blueR32/260sx%20build/100_0278.jpg (http://s763.photobucket.com/user/343blueR32/media/260sx%20build/100_0278.jpg.html)

Only trans shot I have right now:
http://i763.photobucket.com/albums/xx280/343blueR32/260sx%20build/CoolantTFar.jpg (http://s763.photobucket.com/user/343blueR32/media/260sx%20build/CoolantTFar.jpg.html)

Single Turbo Stuff:
http://i763.photobucket.com/albums/xx280/343blueR32/260sx%20build/IMG_1987_zpsdc1d010d.jpg (http://s763.photobucket.com/user/343blueR32/media/260sx%20build/IMG_1987_zpsdc1d010d.jpg.html)
http://i763.photobucket.com/albums/xx280/343blueR32/260sx%20build/IMG_1798_zps4a272997.jpg (http://s763.photobucket.com/user/343blueR32/media/260sx%20build/IMG_1798_zps4a272997.jpg.html)
http://i763.photobucket.com/albums/xx280/343blueR32/260sx%20build/43B4047F-285D-443C-9A1C-F396AE9047FC-35877-0000238E09C537DD_zps6a497cd3.jpg (http://s763.photobucket.com/user/343blueR32/media/260sx%20build/43B4047F-285D-443C-9A1C-F396AE9047FC-35877-0000238E09C537DD_zps6a497cd3.jpg.html)
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc3/1069386_4394336196309_1009990337_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/t1/971851_4394338236360_306253858_n.jpg
https://scontent-b.xx.fbcdn.net/hphotos-prn1/t1/1013933_4394340396414_467071867_n.jpg
https://scontent-a.xx.fbcdn.net/hphotos-prn1/t1/946261_4393260969429_260053807_n.jpg

[hashim]

Damn great build! This is the only thing I would give up my sr20 stroker motor for. I would be willing to add cash on top if you were interested.

[beat92240]

Eh probably not for another motor man. But I would be willing to do trade and cash though if necessary. Or straight up trade for another car if its a decent enough trade that I can sell for close to the same price.

[mjpagan89]

Bump for a fellow RB26 ownwer. Absolutly beautiful build. 800HP easy. Only thing it needs is new oil pump gears and it'll break 1Khp.

[mrturboextreme]

Holy shit free bump because i just spit my redbull everywhere. so clean

[HerraFrussh]

Seriously interested in your trans. Hit me up
803-960-9488

[beat92240]

Everyone has been messaged back.

Sent from my SAMSUNG-SM-N900A using Tapatalk

[Butters26]

:drool: awesome build man glws


Sent from my iPhone using Tapatalk

[beat92240]

I actually ended up parting this out due to being in a hurry to move. This should be closed to avoid any confusion.
Thanks though!

Sent from my SAMSUNG-SM-N900A using Tapatalk

[beat92240]

Price drop since I sold the trans.

As an FYI I did a shipping quote for this to Canada and it was only 650 bucks. So shipping will not be as bad as I would have thought.

Someone pick this up so I don't have to lug it to Florida with me!

[HerraFrussh]

Bump for great seller. He has quality parts and lots of them! I can't wait to get the trans in and do some pulls on it. Still have the seat?

[beat92240]

Thanks bro! Enjoy the goodies you got. I actually got rid of the motor AND the shell. And dude that got the shell wanted every single thing I had left. I just haven't had a chance to take these down yet.

Sent from my SAMSUNG-SM-N900A using Tapatalk

[RBPOWERED240]

any chance of you selling the whole cover kit? (valve covers, cam cover, and coil pack cover)

[beat92240]

Pm'd RBPOWERED240

Sent from my SAMSUNG-SM-N900A using Tapatalk

[beat92240]

This has been sold. Thanks for looking!

[Bnr32gtr]

Do u still have the full race top mount? 4436046344

[beat92240]

No bnr32gtr. As I said it's all been sold.

Sent from my SAMSUNG-SM-N900A using Tapatalk

[chi_weezy]

I thought this was a joke when I saw the first motor, then I scrolled down. Wow!! Looks great

[beat92240]

Haha! Thanks chi_weezy. She was a beauty but she now has a new home in an R32 gtr instead of a 240. Back where she belongs!

Sent from my SAMSUNG-SM-N900A using Tapatalk