Enjuku Racing - ISIS Water Neck ** New Product Release **

[Enjuku Racing]

ISIS Water Neck Outlet - Nissan SR20DET S14/S15 Style With 1/8 npt Coolant Temp Sensor Port
http://www.enjukuracing.com/product_images/a/601/is-wn4__06672_zoom.jpg
http://www.enjukuracing.com/product_images/g/781/is-wn__76556_zoom.jpg
http://www.enjukuracing.com/product_images/x/313/is-wn5__10367_zoom.jpg
ISIS Water Neck Outlet - Nissan SR20DET S14/S15 Style With 1/8 npt Coolant Temp Sensor Port - Enjuku Racing Parts, LLC (http://www.enjukuracing.com/products/ISIS-Water-Neck-Outlet-%252d-Nissan-SR20DET-S14%7B47%7DS15-Style-With-1%7B47%7D8-npt-Coolant-Temp-Sensor-Port.html)

Product Description
ISIS Water Neck Outlet - Nissan SR20DET S14/S15 Style With Integrated 1/8 npt Coolant Temp Sensor Port

This Similar part was originally found on the S14/S15 SR20DET RWD engine, this water outlet will also fit the S13 SR by adding an additional bung for another water line source and water temp sensor port.

No more Need to route water lines behind the engine on your S13. Replace your current water neck with this one and use S14 water lines. Much easier install.

No more need for aftermarket coolant sensor adapters because of the integrated 1/8 npt Coolant Temp Sensor Port

[richmond82]

Sick! i bought a Titek 32mm and had to cut my lower Samco hose on my S15 to make my aftermarket temp sensor work.. I am tempted to buy but then id have a titek in my rad hose and have to plug it.
what is your cost?
Great work !

[slider2828]

Wow for 70 bux... this is a great deal....

For S13 Redtop users, what do people use for that coolant hardline? Just weld it shut?

[KevinEdgar]

Hmm this is pretty cool.

[pete240]

Wow for 70 bux... this is a great deal....

For S13 Redtop users, what do people use for that coolant hardline? Just weld it shut?

You can cut it back and run straight lines to the heater core or just loop them if you don't want to run the heater.