91 240
06-05-2004, 04:03 PM
I have a blown SR that i am parting out. Everything is in good condition but the pistons have been removed and discarded. The block has been to a machine shop and checked out. After heat soak and inspection, the block is fine, but there is a small scratch on the #2 cylinder wall and would require a .5mm overbore. Freeze plugs have also been removed but should be replaced during a rebuild. Other than that, everything is ok and is up for sale.
Parts available:
intake and exhaust manifolds
all internals(minus pistons), oil pans, sump, oil pump, crank, mains, bearings, water pump, pulleys, rods, timing chain, head, cams, gears, rocker arms, shims, valves, springs, lifters, valve cover, etc.
All offers will be considered.
Please email me for questions, [email protected]
Pics are available upon request.
Avery
Parts available:
intake and exhaust manifolds
all internals(minus pistons), oil pans, sump, oil pump, crank, mains, bearings, water pump, pulleys, rods, timing chain, head, cams, gears, rocker arms, shims, valves, springs, lifters, valve cover, etc.
All offers will be considered.
Please email me for questions, [email protected]
Pics are available upon request.
Avery