PDA

View Full Version : NC SR20DET OEM parts


DonVaughnS13
01-17-2014, 11:53 AM
Seeing as I have three SR20DET engines and only two 240's some of this stuff can and needs to go. So let's kick it off. Everything is for a redtop SR20DET

Some smaller things I'm willing to ship, sure. Larger things like the head and block? No.

If you see something you need, I probably have it and have forgotten to add it. The one thing I know I don't have is the SR alternator and bracket. But, I do have a KA24 alternator...

Assembled head with cams SOLD
Block with rods, Pistons, and crankshaft SOLD
Upper Oil pan SOLD
Lower Oil pan SOLD (No dents, comes with stock plug)
Water pump (rust on blades, but worked when I had it installed) SOLD
Oil pump SOLD
Timing chain (Will come with guides, chain, sprocket, and the two screws you need to install along with it) SOLD
Crankshaft Pulley (SOLD)
AC bracket SOLD
Power Steering pump (comes with pulley attached) (SOLD)
Crank Angle Sensor (SOLD)
Intake Manifold (Needs gasket to connect upper and lower manifold) SOLD
370cc Fuel Injectors x4 SOLD
T25 Turbo connected with OEM header, and OEM downpipe (No shaft play, no oil in turbo) SOLD
T25 Manifold Shield $10
ONE set of SR20 Coilpacks $70/each
Two SR20DET engine harness' (One has cut plug somewhere, not sure what it goes to) cut plug version $100
SR20DET starter SOLD

That's all I can think of right now...I'm sure there's more as I go through my garage.

Lastly I have this shell that's sitting here. 109k miles on the body, rust free underbody. Needs a good paint job that's for sure. SE, power everything. Missing carpet, seats and dash. Still have all interior panels. Driver side and passenger side undercoated. $300

PM or text for quickest response (919) 221-5316

Thanks everyone! Happy building

sphuon
01-18-2014, 05:25 AM
Hey, I'm wanting to buy the T25 Turbo connected with OEM header and OEM downpipe. How much to ship to 01854?

stprasinz
01-18-2014, 05:57 AM
the engine harness are they to standard or auto? Can you take a picture of the cut are I can pm you my phone to text the pics to?

And head, Could you check for cracks. Specifically hair lines (or bigger lol) between the valves usually toward the spark plugs, and any of the journals of the cams been damaged by debri?

bmxer882x
01-18-2014, 06:32 AM
Have the bracket for the ps pump as well? Or just pump and pully?

lilben94
01-18-2014, 06:34 AM
Text sent about crank pulley and cas


Sent from my iPhone using Tapatalk

DonVaughnS13
01-18-2014, 08:15 AM
All messages texts and otherwise replied to. Thanks everyone!

Sent from my Nexus 5 using Tapatalk

applefrk15
01-18-2014, 09:39 AM
pm about ps pump please… very interested

slider2828
01-18-2014, 10:34 AM
Do you have the baffle plate for the head? I am interested in that

DonVaughnS13
01-27-2014, 11:54 AM
Monday bump before the snow hits me. CAS, PS Pump, and crank pulley sold!
I have another assembled head and block if anyone is still interested. Let's get this stuff sold! I'm replying to messages now.

Sent from my Nexus 5 using Tapatalk

slider2828
01-27-2014, 12:15 PM
Just replied to you

DonVaughnS13
02-21-2014, 12:09 PM
Bump one more time. What's left is in bold. Let's get rid of the rest of this stuff guys. Thanks.

Backintoans13
02-22-2014, 09:45 PM
Do you have the injector caps??


Sent from my iPhone using Tapatalk

DonVaughnS13
02-25-2014, 05:26 PM
Do you have the injector caps??

Don't have the injector caps sorry.

Sent from my iPhone using Tapatalk





Sent from my iPhone using Tapatalk