S14 SR20 Blacktop 5 speed AEM standalone

[driftg35]

I have a complete, disassembled S14 blacktop engine and transmission for sale. The engine was pulled apart due to loss of oil pressure. When pulled apart, the cause for loss of oil pressure was found. RTV was used to seal the oil pump flange and blocked off the hole. This is a shame because a reputable shop had assembled the engine. No Bearings spun. But some were wore down to the copper. The engine is still 95% complete. I say this only because there is a chance some small things may have been lost in the shuffle. I bought it off a mutual friend who after being burned by the shop, parted the car out. I have the stock ecu, and the AEM standalone. I have the wiring harness, which looks slightly boogered, but the car was running. It has a knock off greddy intake manifold. Full ARP hardware including main, rod, and head studs. The crank looks good. It looks as though some fresh bearings and a reassemble with proper gaskets and you will be ready to rock. It has stock pistons and rods. I am willing to seperate the AEM. Block and trans stay together.

Engine with transmission. And stock ecu. $800 plus shipping. The arp hardware and trans are worth that alone. Plus you get the aftermarket intake mani. Ill also throw in a aluminum flywheel (unknown brand) dosent come with a turbo or injectors.

S14 AEM. $950 plus shipping. Base map for a 2871 and 800 cc injectors

Or take it all for $1600 plus shipping.

I also have a practically new GT2871R. It only has a few hours on it $900 plus shipping. Zero shaft play. Again....its basically new.

Text me at 716-864-4482. Located in Buffalo Ny. I have many other sr, ka, and Rb parts I can sell