dazed
01-03-2014, 11:43 PM
OEM Calsonic 'Test Pipe'. For S13/S14. - $30 shipped
I thought it was just a stock cat, but theres nothing inside, and it hasn't been hollowed out. Possibly off a JDM S14 is my guess. I had to grind the studs down a bit to remove it from the stock exhaust it was attached to. So it will need new studs. Other than that it's basically a low-key test pipe.
http://i71.photobucket.com/albums/i136/zarin_photos/CF02E5A3-2966-44E6-AE92-D0DD4A6BE533_zpshjisoirt.jpg?t=1388728306
http://i71.photobucket.com/albums/i136/zarin_photos/C16EE3F6-9E93-4402-B59C-81F7E85597EE_zpsloxdxgsw.jpg?t=1388728298
http://i71.photobucket.com/albums/i136/zarin_photos/9D611D7C-CEEE-473B-8624-04B01CA50ECF_zpsnhl8dcte.jpg?t=1388728292
What's left of a Powered By Max skid plate for S14 - $10 - local pickup only
It split in half right where my sway bar was. Do with it what you wish (no hardware)
http://i71.photobucket.com/albums/i136/zarin_photos/F4061CB2-C48F-4D68-8DA9-40A6F8DF3D49_zps9wh1xzy3.jpg?t=1388814743
(2) complete sets of OEM turbo lines. They are both for an S14 SR20DET. -$20 shipped each set (May be missing one or two of the washer things)
http://i71.photobucket.com/albums/i136/zarin_photos/447C99A2-AF94-46E7-870C-B9AC2A0B6245_zpsy7bmwfzj.jpg?t=1388816030
Front cover for a HKS SSQV Blow off valve. For non recirc. - $15 shipped
http://i71.photobucket.com/albums/i136/zarin_photos/9E00BC96-E458-41EA-AD91-FA6D7BC24DE3_zps31yg2ghn.jpg?t=1388814772
(2) 4-lug (I don't think actual thread type matters) slip-on spacers. They are either 7mm or 8mm. - $20 shipped
http://i71.photobucket.com/albums/i136/zarin_photos/F7DDFC2B-868F-40DF-AC1D-0BF24631BCA1_zpsypf9ygdc.jpg
(2) 4-lug S14 Hubs. Worked fine. Went 5-lug. - $50 shipped
http://i71.photobucket.com/albums/i136/zarin_photos/BC8F211A-06F8-4743-8313-162566ED8907_zpswtrndkz0.jpg
OEM S14 SR20DET Transmission mount. (Will fit KA/SR) - $30 shipped
http://i71.photobucket.com/albums/i136/zarin_photos/7163AD25-129F-4627-9D3B-A77EFC02BC8F_zps5i6ylusx.jpg
OEM JDM S14 or S15 SR20DET Nissan Oil Filter - $8 shipped (Brand new)
http://i71.photobucket.com/albums/i136/zarin_photos/DD1A993D-6457-4175-9F1B-4F315BD8E70A_zpshwo6jsyy.jpg
OEM KA24DE Nissan Oil Filter - $8 shipped (brand new)
http://i71.photobucket.com/albums/i136/zarin_photos/260B2446-8BE6-4608-8FB7-6C1D395BDEB3_zpsoy0ote2j.jpg
Janky ass hood pin setup. Works perfectly fine actually. Just not very attractive. - $15 shipped
http://i71.photobucket.com/albums/i136/zarin_photos/55095896-1D01-4173-8AE1-F543875E42FF_zpszthztwq4.jpg?t=1388730080
thanks for looking
I thought it was just a stock cat, but theres nothing inside, and it hasn't been hollowed out. Possibly off a JDM S14 is my guess. I had to grind the studs down a bit to remove it from the stock exhaust it was attached to. So it will need new studs. Other than that it's basically a low-key test pipe.
http://i71.photobucket.com/albums/i136/zarin_photos/CF02E5A3-2966-44E6-AE92-D0DD4A6BE533_zpshjisoirt.jpg?t=1388728306
http://i71.photobucket.com/albums/i136/zarin_photos/C16EE3F6-9E93-4402-B59C-81F7E85597EE_zpsloxdxgsw.jpg?t=1388728298
http://i71.photobucket.com/albums/i136/zarin_photos/9D611D7C-CEEE-473B-8624-04B01CA50ECF_zpsnhl8dcte.jpg?t=1388728292
What's left of a Powered By Max skid plate for S14 - $10 - local pickup only
It split in half right where my sway bar was. Do with it what you wish (no hardware)
http://i71.photobucket.com/albums/i136/zarin_photos/F4061CB2-C48F-4D68-8DA9-40A6F8DF3D49_zps9wh1xzy3.jpg?t=1388814743
(2) complete sets of OEM turbo lines. They are both for an S14 SR20DET. -$20 shipped each set (May be missing one or two of the washer things)
http://i71.photobucket.com/albums/i136/zarin_photos/447C99A2-AF94-46E7-870C-B9AC2A0B6245_zpsy7bmwfzj.jpg?t=1388816030
Front cover for a HKS SSQV Blow off valve. For non recirc. - $15 shipped
http://i71.photobucket.com/albums/i136/zarin_photos/9E00BC96-E458-41EA-AD91-FA6D7BC24DE3_zps31yg2ghn.jpg?t=1388814772
(2) 4-lug (I don't think actual thread type matters) slip-on spacers. They are either 7mm or 8mm. - $20 shipped
http://i71.photobucket.com/albums/i136/zarin_photos/F7DDFC2B-868F-40DF-AC1D-0BF24631BCA1_zpsypf9ygdc.jpg
(2) 4-lug S14 Hubs. Worked fine. Went 5-lug. - $50 shipped
http://i71.photobucket.com/albums/i136/zarin_photos/BC8F211A-06F8-4743-8313-162566ED8907_zpswtrndkz0.jpg
OEM S14 SR20DET Transmission mount. (Will fit KA/SR) - $30 shipped
http://i71.photobucket.com/albums/i136/zarin_photos/7163AD25-129F-4627-9D3B-A77EFC02BC8F_zps5i6ylusx.jpg
OEM JDM S14 or S15 SR20DET Nissan Oil Filter - $8 shipped (Brand new)
http://i71.photobucket.com/albums/i136/zarin_photos/DD1A993D-6457-4175-9F1B-4F315BD8E70A_zpshwo6jsyy.jpg
OEM KA24DE Nissan Oil Filter - $8 shipped (brand new)
http://i71.photobucket.com/albums/i136/zarin_photos/260B2446-8BE6-4608-8FB7-6C1D395BDEB3_zpsoy0ote2j.jpg
Janky ass hood pin setup. Works perfectly fine actually. Just not very attractive. - $15 shipped
http://i71.photobucket.com/albums/i136/zarin_photos/55095896-1D01-4173-8AE1-F543875E42FF_zpszthztwq4.jpg?t=1388730080
thanks for looking