Gription
01-02-2014, 11:21 AM
Trying at this again with updated pics...
Drifting has been fun but I'm ready to travel and see the other side of life. So I'm selling the ol' girl.
Basically this car is awesome.
It has a ton of goodies. I've got about 15k into it, over 1k in the wiring alone.
I'm asking 9 thousand dollars or best offer...
Has a built s14 SR:
Eagle rods
acl bearings
arp rod and main studs
cosworth head gasket
bored .20 over
9:1 compression
valvetrain remains factory, but...
... ..
..It's got a sweet turbo
Precision pte 5857.
For those of you who don't know what that is, it's a billet wheel turbo with anti surge compressor housing.
So it makes super sweet noises when it spools.
And does awesome shit.
Tied to a turbosmart 38mm gate.
Car made about 360whp on 15lbs. It's on 20lbs now. I don't know what that equals out to, but it goes hard as a muh fucka.
I also painted this bitch to match your Crown Royal drank.
BN type 2 with some GP sports rear.
No it's not authentic. Ain't nobody got time fo dat.
I don't know what kind of hood is on it but I kinda like it.
Has a cracked windshield cuz too many horsepowers. Cops don't hassle though.
I put a super sweet wiring harness in this chariot. Fuses? PFFFFTTTTT.. please. Mutha fucka's got circuit breakers that you can reset if they ever for some reason pop... which they shouldn't cuz they cost about $60 a piece.
AIRCRAFT GRADE! Look em up if you don't believe me.
I did a bunch of front end work so everything is removable when you stuff it into a wall.
Also has some sweet tubs so you can fit 24's on this bitch when you're ready to donk it out. But for now, it's sittin pretty on a set of Work Rezax.
17x9.5 +1, 17x11 +7 ; no spacers cuz they're fuckin dumb.
Buddy Club seat.
PBM coils, rucas, subframe risers and toe rods.
Project Silvia tie rods and tension rods.
Pretty gnarly slotted rotors.
Welded diff.
I'm sure I'm forgetting some things, so feel free to ask questions if you're interested.
Located in Dover, Delaware.
On to the pics...
http://i14.photobucket.com/albums/a311/strikebackbmx/Onevia/192546_10151310331435469_199386796_or.jpg
http://i14.photobucket.com/albums/a311/strikebackbmx/Onevia/DSC_2957r.jpg
http://i14.photobucket.com/albums/a311/strikebackbmx/DSC_2673r.jpg
https://scontent-a-iad.xx.fbcdn.net/hphotos-frc3/1554566_651469748243135_365449843_n.jpg
https://scontent-b-iad.xx.fbcdn.net/hphotos-ash4/1496624_651381461585297_574866723_n.jpg
https://scontent-a-iad.xx.fbcdn.net/hphotos-prn2/1240405_581803271876450_62794709_n.jpg
Drifting has been fun but I'm ready to travel and see the other side of life. So I'm selling the ol' girl.
Basically this car is awesome.
It has a ton of goodies. I've got about 15k into it, over 1k in the wiring alone.
I'm asking 9 thousand dollars or best offer...
Has a built s14 SR:
Eagle rods
acl bearings
arp rod and main studs
cosworth head gasket
bored .20 over
9:1 compression
valvetrain remains factory, but...
... ..
..It's got a sweet turbo
Precision pte 5857.
For those of you who don't know what that is, it's a billet wheel turbo with anti surge compressor housing.
So it makes super sweet noises when it spools.
And does awesome shit.
Tied to a turbosmart 38mm gate.
Car made about 360whp on 15lbs. It's on 20lbs now. I don't know what that equals out to, but it goes hard as a muh fucka.
I also painted this bitch to match your Crown Royal drank.
BN type 2 with some GP sports rear.
No it's not authentic. Ain't nobody got time fo dat.
I don't know what kind of hood is on it but I kinda like it.
Has a cracked windshield cuz too many horsepowers. Cops don't hassle though.
I put a super sweet wiring harness in this chariot. Fuses? PFFFFTTTTT.. please. Mutha fucka's got circuit breakers that you can reset if they ever for some reason pop... which they shouldn't cuz they cost about $60 a piece.
AIRCRAFT GRADE! Look em up if you don't believe me.
I did a bunch of front end work so everything is removable when you stuff it into a wall.
Also has some sweet tubs so you can fit 24's on this bitch when you're ready to donk it out. But for now, it's sittin pretty on a set of Work Rezax.
17x9.5 +1, 17x11 +7 ; no spacers cuz they're fuckin dumb.
Buddy Club seat.
PBM coils, rucas, subframe risers and toe rods.
Project Silvia tie rods and tension rods.
Pretty gnarly slotted rotors.
Welded diff.
I'm sure I'm forgetting some things, so feel free to ask questions if you're interested.
Located in Dover, Delaware.
On to the pics...
http://i14.photobucket.com/albums/a311/strikebackbmx/Onevia/192546_10151310331435469_199386796_or.jpg
http://i14.photobucket.com/albums/a311/strikebackbmx/Onevia/DSC_2957r.jpg
http://i14.photobucket.com/albums/a311/strikebackbmx/DSC_2673r.jpg
https://scontent-a-iad.xx.fbcdn.net/hphotos-frc3/1554566_651469748243135_365449843_n.jpg
https://scontent-b-iad.xx.fbcdn.net/hphotos-ash4/1496624_651381461585297_574866723_n.jpg
https://scontent-a-iad.xx.fbcdn.net/hphotos-prn2/1240405_581803271876450_62794709_n.jpg