Patricks13
01-01-2014, 05:01 PM
Whats up guys.
I recently installed a hid kick on my 1990 240sx. I got the h4 conversion, plugged everything up and it ran smoothly from like two months. For the past week the bulbs had not been turning on right away and the pop up lights did not want to go down. however after like 30 min of driving they turned on. After searching for an answer i discovered water has gotten into one of the connectors because of bad insulation and caused a short so i decided to go back to oem. I cleaned all the wiring up and after plugging in the oem lights only the driver side light turns on and passenger does not. There is no high or low beam on the pass side and the pop up lights dont work on either side.
I checked all the relays and fuses and they all seem to be ok. i checked the switch on the steering column with another 240 and it worked fine. Also when i turn on the high beams the indicator on the dashboard does not go on. The only thing i see left is a wire somewhere not getting the right connection?
What are your guys suggestions? Let me know !
I recently installed a hid kick on my 1990 240sx. I got the h4 conversion, plugged everything up and it ran smoothly from like two months. For the past week the bulbs had not been turning on right away and the pop up lights did not want to go down. however after like 30 min of driving they turned on. After searching for an answer i discovered water has gotten into one of the connectors because of bad insulation and caused a short so i decided to go back to oem. I cleaned all the wiring up and after plugging in the oem lights only the driver side light turns on and passenger does not. There is no high or low beam on the pass side and the pop up lights dont work on either side.
I checked all the relays and fuses and they all seem to be ok. i checked the switch on the steering column with another 240 and it worked fine. Also when i turn on the high beams the indicator on the dashboard does not go on. The only thing i see left is a wire somewhere not getting the right connection?
What are your guys suggestions? Let me know !