jk26
12-26-2013, 03:14 PM
I have an almost complete oil cooler set up for SR20 the only piece missing is a block or sandwich plate off your choice (Tomei, stance)
Included
-All the Aeroquip fittings and SS lines to run the whole setup including the lines from the block off or sandwich plate
-HKS THERMOSTATIC oil relocation block
- Setrab 625-7612 m22 threaded 25 row oil cooler
Looking for $350
http://i1094.photobucket.com/albums/i455/jkayne26/1362430685.jpg
http://i1094.photobucket.com/albums/i455/jkayne26/1362430714.jpg
http://i1094.photobucket.com/albums/i455/jkayne26/1362430727.jpg
http://i1094.photobucket.com/albums/i455/jkayne26/1362430755.jpg
http://i1094.photobucket.com/albums/i455/jkayne26/1362430776.jpg
http://i1094.photobucket.com/albums/i455/jkayne26/1362430852.jpg
http://i1094.photobucket.com/albums/i455/jkayne26/1362430797.jpg
RB26 R34 Head this head has a 5 angle valve job with oem valves, new Tomei exhaust valve guides, clearanced for high lift cams, and ported exhaust hump knife edged port divider. looking for $900
http://i1094.photobucket.com/albums/i455/jkayne26/1377968426.jpg (http://s1094.photobucket.com/user/jkayne26/media/1377968426.jpg.html)
http://i1094.photobucket.com/albums/i455/jkayne26/1377968377.jpg (http://s1094.photobucket.com/user/jkayne26/media/1377968377.jpg.html)
http://i1094.photobucket.com/albums/i455/jkayne26/1377968374.jpg (http://s1094.photobucket.com/user/jkayne26/media/1377968374.jpg.html)
http://i1094.photobucket.com/albums/i455/jkayne26/1377968368.jpg (http://s1094.photobucket.com/user/jkayne26/media/1377968368.jpg.html)
Included
-All the Aeroquip fittings and SS lines to run the whole setup including the lines from the block off or sandwich plate
-HKS THERMOSTATIC oil relocation block
- Setrab 625-7612 m22 threaded 25 row oil cooler
Looking for $350
http://i1094.photobucket.com/albums/i455/jkayne26/1362430685.jpg
http://i1094.photobucket.com/albums/i455/jkayne26/1362430714.jpg
http://i1094.photobucket.com/albums/i455/jkayne26/1362430727.jpg
http://i1094.photobucket.com/albums/i455/jkayne26/1362430755.jpg
http://i1094.photobucket.com/albums/i455/jkayne26/1362430776.jpg
http://i1094.photobucket.com/albums/i455/jkayne26/1362430852.jpg
http://i1094.photobucket.com/albums/i455/jkayne26/1362430797.jpg
RB26 R34 Head this head has a 5 angle valve job with oem valves, new Tomei exhaust valve guides, clearanced for high lift cams, and ported exhaust hump knife edged port divider. looking for $900
http://i1094.photobucket.com/albums/i455/jkayne26/1377968426.jpg (http://s1094.photobucket.com/user/jkayne26/media/1377968426.jpg.html)
http://i1094.photobucket.com/albums/i455/jkayne26/1377968377.jpg (http://s1094.photobucket.com/user/jkayne26/media/1377968377.jpg.html)
http://i1094.photobucket.com/albums/i455/jkayne26/1377968374.jpg (http://s1094.photobucket.com/user/jkayne26/media/1377968374.jpg.html)
http://i1094.photobucket.com/albums/i455/jkayne26/1377968368.jpg (http://s1094.photobucket.com/user/jkayne26/media/1377968368.jpg.html)