PDA

View Full Version : CA FS: APEXI RX6 turbo kit *damaged cheap* BEST JAPANESE TURBO KOGUCHI APPROVED


ILoveJDM
12-23-2013, 02:26 PM
For sale is my Apexi RX6 turbo kit *DAMAGED PLEASE READ*

A little background info on this turbo:

Same spec turbines used in:
ferrari f40
Koguchi's silver demo car with sr22
Formula 1 when the v8's were bi-turbo.

This is by far one of the best if not the best Japanese turbo to be produced. This model is 450PS capable, the compressor side is close to the size of a gt35, while the turbine housing is more of t28 size, this gave it the ability to make massive power with minimal lag. This turbo only runs oil lines. I bought the car with this turbo on it, it was used as a 0-400m drag car in japan with an sr21.

*the turbo is DAMAGED, it was like this when I received it on the car, it looks as though a bolt somehow got sucked into the compressor housing. THERE IS ZERO SHAFT PLAY. I have contacted an IHI turbos dealer (producer of this turbo) and it will be about $600 for replacement of the CHRA.

Before my SR22, I had dyno'd with a built SR20 270 cams, and it made 330hp with the bent fins as you see at 17psi. This turbo has way more into it once the fins are replaced.

It will include the turbo, top mount manifold, and Greddy type C waste gate /dump pipe

THE BAD;
Turbo compressor fins are bent
1 bolt broke off from the down pipe (just easy-out it)
The manifold waste gate tube has cracked welds, easy fix.

MSRP $4k+

$500 for everything + shipping. After replacement of the fins, you'd have a rowdy top mount setup for $1200

***video: MVI_2630_zpsd9db9fb7.mp4 Video by 240sxy | Photobucket (http://smg.photobucket.com/user/240sxy/media/MVI_2630_zpsd9db9fb7.mp4.html)

http://img.photobucket.com/albums/v510/240sxy/2013-04-21213803_zps40fd7f98.jpg
http://img.photobucket.com/albums/v510/240sxy/IMG_3814_zpsc85e7661.jpg
http://img.photobucket.com/albums/v510/240sxy/IMG_3817_zps2c66ab76.jpg
http://img.photobucket.com/albums/v510/240sxy/IMG_3818_zps3c5cec44.jpg
http://img.photobucket.com/albums/v510/240sxy/IMG_3821_zps75ae3444.jpg
http://img.photobucket.com/albums/v510/240sxy/IMG_3827_zps4991a5e1.jpg
http://img.photobucket.com/albums/v510/240sxy/IMG_3828_zps504793d9.jpg
http://img.photobucket.com/albums/v510/240sxy/IMG_3829_zps4a556b07.jpg

S13alldayyo
12-23-2013, 06:18 PM
I would so buy this in 3 months lol


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

InsTanCeZ
12-23-2013, 06:22 PM
Does the manifold/downpipe work with LHD cars?

ILoveJDM
12-24-2013, 11:59 AM
Does the manifold/downpipe work with LHD cars?

to be honest I couldn't say for sure.

If it didn't it would only need light medication to the waste gate tube bracing it looks like.

ILoveJDM
12-26-2013, 10:18 AM
bump bump bump

ILoveJDM
01-12-2014, 12:39 AM
bump $400, no wastegate

JDM king240
01-12-2014, 01:04 AM
If u have by next week ill take it good sir

sumoevo8MR
01-13-2014, 05:25 AM
Ill give u $500 right now, if ur willing to post to australia at my expense? let me know