SSR Professor SP 1's

[Doriftomodachi]

How many people here have these wheels?

Are they clear coated? Anyone bend these rims?

[russian]

they are top notch shit. cant go wrong with SSR, prety popular in high end cars.

[VEX240]

I should be getting mine anyday now in black. Ordered them the begining of april 6-10 week wait.

[Supra Hunter]

WORK S1C!!!!! :coold:

[eyustfu]

i have a set, still no money for tires though, here are close up of the rims if your interested http://f1.pg.photos.yahoo.com/ph/eyustfu/album?.dir=/4b87&.src=ph&store=&prodid=&.done=http%3a//photos.yahoo.com/eyustfu

[Heartwork]

nice wheels.
a couple of my friends have them, one of them has an 18x10 +6 offset or something and looks HOT (about a 5.25" lip), and the other friend has 18x8.5 +37 and looks like ASS (no lip, spoke FLUSH with outer RIM) ...both Super Black Coat, looks to be very well made and havent heard of any bending yet, but then again ANY wheel will bend.....

just get them in wide and low offsets :)

Work S1 > SSR Professors :p

[eyustfu]

yea i agree with heartwork, high offsets doesnt justify the wheels, mine arent as extreme because i dont plan to pull my fenders or go with wide front/rear fenders, i just have 18x9.5 +22 for the fronts and 18x9.5 +18 for the rear

[s14srpilot]

yea i agree with heartwork, high offsets doesnt justify the wheels, mine arent as extreme because i dont plan to pull my fenders or go with wide front/rear fenders, i just have 18x9.5 +22 for the fronts and 18x9.5 +18 for the rear

Did you have to roll the rear fender lip to get the rears to fit?

[Steeles]

Did you have to roll the rear fender lip to get the rears to fit?
If you READ he dosent have money for tires yet and as such they are not on his car yet. hence the pics of them in boxes still.... :rant2:

[eyustfu]

i think with -3 you wont have to roll the fenders, but i plan to run -2.5 maybe and roll the fenders, i still have to install my rear upper arm and toe rod before i actually plan on getting tires for them.

[s14srpilot]

If you READ he dosent have money for tires yet and as such they are not on his car yet. hence the pics of them in boxes still.... :rant2:

Thanks for the sarcastic heads up. Now relax man or you'll die of a heart attack

[Steeles]

Thanks for the sarcastic heads up. Now relax man or you'll die of a heart attack

your welcome. I'm very relaxed, why would I let the fact that you cant read stress me? I know I'm old but im not having a heart attack anytime soon but thanks for caring

[s14srpilot]

your welcome. I'm very relaxed, why would I let the fact that you cant read stress me? I know I'm old but im not having a heart attack anytime soon but thanks for caring

Are you naturally an asshole or are you trying to be one? If you have NEVER made a mistake in your life then I'll excuse you for acting like an idiot. If you DIDN'T have major issues you wouldn't get all uptight about PETTY little mistakes like someone not reading a previous post. :mrmeph:

Damn, why is it so hard to get a simple polite answer on this forum...

[s14srpilot]

If you READ he dosent have money for tires yet and as such they are not on his car yet. hence the pics of them in boxes still.... :rant2:

Hey DUMBFUCK I don't follow the guy around. It's POSSIBLE he could have won the lottery and bought some tires since he last posted. Thanks for your USELESS post

[s14srpilot]

nice wheels.
a couple of my friends have them, one of them has an 18x10 +6 offset or something and looks HOT (about a 5.25" lip), and the other friend has 18x8.5 +37 and looks like ASS (no lip, spoke FLUSH with outer RIM) ...both Super Black Coat, looks to be very well made and havent heard of any bending yet, but then again ANY wheel will bend.....

just get them in wide and low offsets :)

Work S1 > SSR Professors :p

Let's try this again:

I saw a post on zilvia (I searched "SSR Professor SP1" but the SPECIFIC post didn't come up) about an s14 with 18x19 +13 with PULLED fenders for the rear and 18x9 +20 for the front. I think it was you that posted and the wheels were work meister s1's though.

Do you know if these offsets for ssr professor sp1's will work on an s14 with just rolling the fenders for the rear? I don't wanna pull them or get wide rear fenders:

Front: 18x9 +19
Rear: 18x10 +24

or what about:

Front: 18x8 +11
Rear: 18x9.5 +30

Thanks!

[eyustfu]

You might have to run some negative camber up front, the rears should be fine with fender rolling and normal camber

[Steeles]

s14srpilot - (warning im combining replies here)
Are you naturally an asshole or are you trying to be one? If you have NEVER made a mistake in your life then I'll excuse you for acting like an idiot. If you DIDN'T have major issues you wouldn't get all uptight about PETTY little mistakes like someone not reading a previous post.

Damn, why is it so hard to get a simple polite answer on this forum...

both Im a natural that works hard at staying on top of my game. I've made plenty of mistakes... Im starting to count continuing this usless banter with you as one already. why am I uptight about how petty you are? cause I can be. remember Im an asshole. its in my nature

its not really hard you just have to be intelligent about it. draw your own conclusions from there

Hey DUMBFUCK I don't follow the guy around. It's POSSIBLE he could have won the lottery and bought some tires since he last posted. Thanks for your USELESS post

wow did my comment bother you so much that you had to reply TWICE and resort to name calling? hmmmm must've struck a nerve.. . i would hope you dont follow dudes around.. thats just creepy. I know your in cali and all but sheesh. its possible he hit the lottery and collected money and got tires in the 21hours between his post and yours? quit reaching for straws man. your only hurting yourself. thank you for TWO useless posts... well I take that back. they were usefull in proving how right i was about how lazy you are.

next please?

[Phlip]

OOH OOH ME, I WANNA BE NEXT!!! Brandon, you're a doo doo head and your mommy dresses you funny

[Phlip]

Are you naturally an asshole or are you trying to be one? If you have NEVER made a mistake in your life then I'll excuse you for acting like an idiot. If you DIDN'T have major issues you wouldn't get all uptight about PETTY little mistakes like someone not reading a previous post. :mrmeph:

Damn, why is it so hard to get a simple polite answer on this forum...
Actually he is quite naturally an asshole, speaking in the terms of having been a close personal friend for a little while now... We have all made mistakes, but rarely will we make the mistake of posting a question on a thread in a message board that was clearly answered by that individual already...
It's not hard to get an answer around here until you ask a question that was preemptively answered, that or asking questions that have been answered and argued over a billion times which, luckily, you aren't guilty of yet.

[Heartwork]

Let's try this again:

I saw a post on zilvia (I searched "SSR Professor SP1" but the SPECIFIC post didn't come up) about an s14 with 18x19 +13 with PULLED fenders for the rear and 18x9 +20 for the front. I think it was you that posted and the wheels were work meister s1's though.

Do you know if these offsets for ssr professor sp1's will work on an s14 with just rolling the fenders for the rear? I don't wanna pull them or get wide rear fenders:

Front: 18x9 +19
Rear: 18x10 +24

or what about:

Front: 18x8 +11
Rear: 18x9.5 +30

Thanks!

Offsets are NOT wheel specific....What is specific on clearance are spoke designs though...and in this case the SP1's have similar spoke design to the Works S1 and will clear Z32 calipers....

18x9 +11 will fit up front with stretched tires and rolled fenders....
I also run 17x8 +7 up front for the track 225-45-17, no rubbing, super super super flush...

18x10 +24 will fit in rear with rolled fenders and super stretched tires of course.... iEATrice is running 19x10.5 +26 on his rolled rears of his S14

18x8 +11, and 18x9.5 +30 will both fit with rolled fenders and slight stretch tires of the rears...

[Steeles]

OOH OOH ME, I WANNA BE NEXT!!! Brandon, you're a doo doo head and your mommy dresses you funny
OOH finally a worthy opponent!!! :bash:

[s14srpilot]

s14srpilot - (warning im combining replies here)


both Im a natural that works hard at staying on top of my game. I've made plenty of mistakes... Im starting to count continuing this usless banter with you as one already. why am I uptight about how petty you are? cause I can be. remember Im an asshole. its in my nature

its not really hard you just have to be intelligent about it. draw your own conclusions from there



wow did my comment bother you so much that you had to reply TWICE and resort to name calling? hmmmm must've struck a nerve.. . i would hope you dont follow dudes around.. thats just creepy. I know your in cali and all but sheesh. its possible he hit the lottery and collected money and got tires in the 21hours between his post and yours? quit reaching for straws man. your only hurting yourself. thank you for TWO useless posts... well I take that back. they were usefull in proving how right i was about how lazy you are.

next please?

So you make mistakes. Somehow I knew that. Why would you think you're worth following around? Don't flatter yourself man. You're the one with the useless posts, I'm just trying to gather information here. Anyway, whatever man. At least I got my answer so no harm done.

[revat619]

Since we're on the subject, what would it take to fit 18x9 -4 offset up front and 18x10 -2 offset in the rear on an s14? Tires would be 225/40 and 245/40. i know i would have to run more negative camber than my current set up (3.25 front 2.5 rear) and of course rolling fenders, my question is how much pulling would i be looking at for the rears? I havent bought these wheels though, i'm just wondering. Cuz if i did, i wouldnt want it to look asstastic. This car is my daily driver too. I dunno, i'm thinking it would be too extreme...

[drift into a curb]

If you pull them, you should pull about an 1" in the front and 2" in the rear, depending on the camber you're running. I'm running stock camber settings right now with the 5zigen 17x9 +15 17x10 +12 with F 215/45 and rear 225/45. The front is flush with no roll fenders yet. So I imagine with a -4, you'll stick out 19 mm about an inch (25.4mm). The rears are already sticking out about an 1.5 inches with just rolled fenders and stock camber, so with a -2 offset , it would stick out about 52mm, almost 2 inches. Haven't set my alignment yet because I need to lowered it 2 more inches or so.

http://www.imagestation.com/picture/sraid117/pdec989f7418e0aa5ab8b8487a66fe379/f89b4c19.jpg

[nissan slut]

:cool: nice offsets

[SimpleS14]

iEATrice is running 19x10.5 +26 on his rolled rears of his S14


man....does he happen to have any pics of that? :yum:

with 17x9.5 +22 in the back.....I don't have to roll fenders...right?

[Heartwork]

man....does he happen to have any pics of that? :yum:

with 17x9.5 +22 in the back.....I don't have to roll fenders...right?

with slight 235-40-17 stretch it will fit fine, even with STOCK camber settings :)

[Phlip]

OOH finally a worthy opponent!!! :bash:
That's funny as hell, seeing as how you and I have been going at it on various forums and in person for at least 2 years now... We need to hit up hooters this weekend foo!!!

[SimpleS14]

with slight 235-40-17 stretch it will fit fine, even with STOCK camber settings :)


i was looking to get some 45 series tires so fill the wheel well. I forgot what my camber was in the back...I think its -2.1 or something like that.

[No Motiv]

BAHAHAHAHHAHAHAHAH (sorry, i havent posted here in a while) Steeles you're sig..some good PG shit right there..

[Steeles]

That's funny as hell, seeing as how you and I have been going at it on various forums and in person for at least 2 years now... We need to hit up hooters this weekend foo!!!

Hell yeah we do man. we havent done that in forever. jason's lame ass was on temporary lock with that chick and wouldnt go so we need to restart that tradition. remind me to send you the pics from the bikini contest ;)

No motiv - thanks mang :) I got another one I wanna do too. just gotta grab the time

[Grant]

OOH finally a worthy opponent!!! :bash:

um.. just curious.. why are ya picking on norm? he's a friend of pink godzira isnt he? (I at least know lindsay, aaron, and brian know him)...

anyways.. just watch it..