PDA

View Full Version : NJ S13 S14 Turbo, NA, Motors, Parts, anything you need find it here!!


ssigma6
12-17-2013, 01:23 PM
Okay I have a lot of parts accumulating throughout my garages and I need to get them gone so I can push forward on my build this winter.

First up is this KA-T - SOLD (Turbo Kit still available)
This motor has been fully re-built. I bought this car as an unfinished s13 project sold the shell and kept the motor. I opened it up and to my surprise I found all of this.

Supertech Pistons
New Piston rings
New Rods
Bearings (wrist pin and Crank)
All new seals top to bottom
New oil pump
New timing chain
New tentioners
Head resurfaced and cleaned (top to bottem)
New freeze plugs
New gaskets top to bottom
New Water Pump
Totally cleaned Engine block
Tubular Exhaust manifold T3/T4
50Trim Turbo
JDM Sport Wastegate

I also have an s13 and s14 engine harness and ecus. You can pick this guy up as is or with a trans and ecu according to your set up. As the motor sits now with nothing else I am looking to get 750 out of it. The pistons alone are worth almost that. I do not have receipts for any of this but I do have pics as i opened it up and put it back together.

Continuing on....

Turbo kit - 250 includes

Tubular t3/t4 manifold
Sport JDM Wastegate
50trimm t3 Turbo
Feed and Return lines
Downpipe

I have a stock s13 manual radiator.... A little beat up but no leaks. 40

S13 power steering rack and pinion 65

S13 non abs Drive shaft 50

S13 Injen intake 50

s13 s14 dual cam 4-2-1 Headers - SOLD

S13 and s14 Trans (one of each) 100

S13 and s14 ECU (one of each) 50

S13 and s14 Engine Harness (one of each) 80

S13 single cam Maf 30

s14 Maf 45

S13 fuel pump 25

s14 fuel pump 25

This one is lightly random but I also have a 350 small block up for sale 750 takes it
Edelbrock Performer intake manifold/ cam/ and lifter kit installed
motors was rebuilt about 7 months ago and was pulled from my buddys c10 pickup due to a collapsed lifter (which I replaced all of) and a crate motor replaced it. I received it as payment had plans for it but kind of want my space back again.

I have other random stuff laying around a few interior parts, shift boots, center console, window motors and regulators, seat rails, headlight motors, ect, ect. I am willing to ship parts obviously shipping is not included in these prices. Feel free to pm or contact me at 732-337-7703 Im usually up whenever I work crazy hours at my shop so shoot me a call or text with any questions. Thanks for looking guys! Hope you found something you could use.

Will update with photos later damn internet is taking forever to upload...

miamiman323
12-18-2013, 09:58 AM
What kind of manifold is it?

ssigma6
12-18-2013, 11:00 AM
I am unsure if you want to text me my number is in the post I can send you more pics

ssigma6
01-02-2014, 01:29 PM
Bump bump bump

Sideways Cabral s13
01-02-2014, 02:16 PM
hey would you happn to have an s13 sr20 t25 oem boost solenoid??

ssigma6
01-20-2014, 12:37 PM
No i would not sorry for the delay

ssigma6
01-21-2014, 08:18 PM
Back to the damn top biatchhh!!!!

ngtwolf26
01-21-2014, 08:35 PM
What's the condition on the s14 harness?

Sent from my ADR6425LVW using Tapatalk

ssigma6
01-25-2014, 11:26 AM
Pm'd in reference to the s14 Harness