What Nissan car has RB25 ECU wiring pins?

[teddyjr]

I have to repair an RB25DET ECCS (ECU) plug. It's the blue one with the 10mm bolt in the center. My problem is a few of the smaller female wiring pins (#1-60) are munged. Does anyone know what USDM Nissan harness plugs share this wiring pin format?

[JSimmons]

Im pretty sure the z32 uses the same plug

[OnTheChip]

and Maxima.

[baube]

or brand new from wiringspecialities

[Rich260z]

You mean the ECU to engine/body harness? Because most nissans from the era will have a similar ECU pinout plug

[wiring specialties]

We have the terminals and any other connectors you may need. Everything is brand new as well

[teddyjr]

Thanks for the replies. I'm referring to the harness connector that plugs into the RB25DET ECCS (ECU). The connector is male and has it's blue one with a 10mm bolt in the center to hold the connector into the ECU. JSimmons is right, I've found out the Z32 ECU (physically) plugs right into the RB Harness. Problem is no Z32s in the salvage yard! I will look at Maxima and also call Yury at WSP. Rich260z: the "F1" or Engine-to-main (dash) harness connectors are the same between the S14 and R33. That's not what I need. The S14 ECU pins are different than the RB. Thanks for all the replies!

[teddyjr]

We have the terminals and any other connectors you may need. Everything is brand new as well

I'll call tomorrow, Thanks! P.S. LOVE your pre-made RB25DET-to-S14 harness. No codes, and car started after three revolutions. Kudos!

[1990 240sx Rb25]

jus buy from wire specialties i have their full harness and check out my feature of my rb they put up these guys are great