PDA

View Full Version : TF★ New Work Seeker Series!!


tougefactory
12-10-2013, 06:20 PM
New Work Seeker Series!

http://www.workwheelsusa.com/userfiles/SEEKER_BANNER.jpg

http://farm3.staticflickr.com/2805/11226470455_c88913e260_b.jpg
The first model in the series is the WORK Seeker CX, which has an intricately woven center disk pattern that can compliment many body styles. The Machine Silver Polish (MSP) Finish, as shown above, highlights the multiple level design of the mesh.

The entire WORK Seeker line allows for varying width options. Here are the available wheel widths by diameter:

The 16" is available in 6.0" wide through 9.0" wide (widths range in 1/2" increments).
The 17" is available in 7.0" wide through 9.5" wide (widths range in 1/2" increments).
The 18" is available in 7.5" wide through 11.5" wide (widths range in 1/2" increments).

Standard bolt patterns offered are 4x100, 5x100, and 5x114.3. Custom bolt patterns are available in the following ranges: 4x98~114.3 / 5x98~120.65.

http://farm3.staticflickr.com/2864/11226579994_7d828f1d13_c.jpg

The WORK Seeker DX provides a retro-influenced style that is perfect for those seeking a full face design. The Machine Silver Polish (MSP) Finish, as shown above, showcases the quality of the machining work from WORK Wheels.

Standard center disk finishes for the Seeker series are Machine Silver Polish (MSP) & Matte Black (MBL). Custom center disk finish and barrel finishes are available, please contact us for options. All WORK Seeker wheels come with an included Seeker center cap, along with a standard straight type valvestem.


http://farm8.staticflickr.com/7397/11315691483_e8b233848a_b.jpg

The third option is the WORK Seeker FX, which has a fin-type design that is suitable for compact and sport vehicles. The Machine Silver Polish (MSP) Finish is a multi-stage process where the center disk is painted silver, then the face is machined, and lastly clear coated. This two-tone result is subtle, adding a touch of luxury to a sporty wheel.

d_nice
12-10-2013, 06:57 PM
oh wow..those look nice

Sterlz
12-10-2013, 07:45 PM
Kinda looks like wheels from that german company Schmidt.

genericforumname
12-11-2013, 12:15 AM
I was going to say they look okay but then I saw the part about "custom bolt patterns" I can only think of one other company that offers that and they are crazy expensive.

I hope these work out.

though if I'm reading correct it's only one color for two of them and two options for the third? wouldn't mind considering these for my WRX since nothing decent comes in 5x100 but I'm not interested in those color options.

teh smithers
12-11-2013, 02:19 AM
http://2.bp.blogspot.com/-xjJXGIeY6G0/UIR9f1ujDpI/AAAAAAAAApU/BF5eLAuDJ8U/s320/The+Rock+Clapping.gif

s13silvia123
12-11-2013, 07:24 AM
what offsets are offered

Suit
12-11-2013, 11:02 AM
http://2.bp.blogspot.com/-xjJXGIeY6G0/UIR9f1ujDpI/AAAAAAAAApU/BF5eLAuDJ8U/s320/The+Rock+Clapping.gif

could not explain my emotions any better right now hahahahah :hitit:

xDRFTurR1D3x
12-11-2013, 10:51 PM
Pricing on seeker Cx 16x8 +15 in 4x114.3 bolt pattern. also pricing separately for exact same specs for DX as well.

Also.
17x9 +15 in 4x114.3 or 5x114.3 for CX model and separate pricing for same specs In FX model please

tougefactory
12-12-2013, 11:23 AM
All Pm's have been replied to.


what offsets are offered

Offsets really depend on the width you want. But for a 18x10.5 they have +88 ~ -24 at one millimeter increments.

Shift n Drift
12-12-2013, 03:51 PM
Those CX's would look good on my S30.

starfireS14
12-25-2013, 11:35 AM
What are the pricepoints for the FX in 18's?

kroid777
12-28-2013, 01:24 PM
Also Interested in pricing for CX's in 17x9.5 all around

dbiz
01-07-2014, 08:13 PM
ballpark quote for cx in 18x10 and 18x11.5?

mogli9000
01-13-2014, 02:16 AM
quote for 18 x 9 / 18 x 10 +15 dx lowest dish possible

hardtime21
02-07-2014, 07:32 PM
WORK Seeker DX and CX 18x8.5 +15 Front / 18x9.5 +12 Rear ...... 4x114.3 shipped to 38128?