PDA

View Full Version : SC Sr20 JWT Ecu, 550cc injectors, z32 maf, E-mance tuned Ecu w/SAFC also


ghudson
12-06-2013, 05:19 PM
Both ECU's are s14 SR20 (VCT) ECU's, Sorry s13 guys

Here's the deal. I recently bought the Jim Wolf Technology ECU to upgrade my s14 sr20 from the E-mance (jason @ e-mance) ecu to the JWT ecu. I havent ran the JWT ECU yet, but I have run the E-mance tuned ECU partnered along with an Apexi SAFC. The reason I am selling all of this is because right after I purchased the JWT ecu an Apexi Power-FC D-jetro popped up on zilvia for a bargain so I bought it and now I no longer need either of the ECU's, injectors (ill be going slightly larger), or z32 MAF...

SO...

First off the JWT ECU:
Tuned for 555cc injectors, Z32 MAF, and a gt2860.
"WC" type ECU (manual trans)

Since I havent ran it yet I can not tell you the AFR's at all. If you really want to know I can ask the member I just purchased it from and Im sure he will provide some info. But we all know how well known JWT is and the quality of their tunes/product.

Next is the E-mance ECU:
Tuned for 550cc injectors, Z32 MAF, and gt2860.
"WC" type ECU (manaul trans)

When I ran this it was OK. But I definatly needed the SAFC to clean up the fuel mapping. AFR's were: 14.7-15.0 idle about 15.5 crusing but way too lean during spool up and during full boost (about 15.5ish still) Hence the reason I am going to sell it for cheap. It will still work, just need an SAFC to band-aid it which I have and will ONLY sell along with it.

Deatschwerks 550cc injectors:
Bought them new, have about 5000 miles on them, used ethanol-free 93 octane their whole life.

Z32 Maf:
Came off a Z32 I actually owned, works fine. (Does include Wiring specialties harness for the MAF)

PRICES:
Package deal prices:
JWT ECU, 550cc injectors, Z32 MAF $600
E-mance ECU (with SAFC version 1), 550cc injectors, Z32 MAF $475

Individual prices:
JWT ECU $350
E-mance ECU (w/safc) $150
Deatschwerks 550cc's $225
Z32 MAF $70 with wiring specialties harness.

WILL TAKE TRADES! Looking for:
Gt28 0.86 A/r exhaust housing
740-810cc injectors
Rb25 cylinder head parts (aftermarket parts)
Nice Bucket seats
R32 skyline trunk lid or diffuser for r32
USDM driver side Silvia brick headlight
Silvia corner lights



Now for some pic's

http://i39.tinypic.com/2efq2hz.jpg

http://i43.tinypic.com/23lbq04.jpg

http://i40.tinypic.com/ji101x.jpg

http://i42.tinypic.com/amqk4o.jpg

http://i44.tinypic.com/2z4znuu.jpg


http://i44.tinypic.com/29kt0nq.jpg

TATE843
12-07-2013, 04:48 PM
roommate BUMB!

ghudson
12-10-2013, 03:03 PM
bump to top

ghudson
12-18-2013, 04:04 PM
bumping up again

ghudson
01-02-2014, 01:28 PM
All prices dropped, last bump

Rb26kouki
09-16-2014, 12:21 PM
You have a pm

jerryscherry
09-16-2014, 08:44 PM
did you happen to check for boost leaks when using the Emance ecu? lean spoolup could be a sign of a leak, especially on intake (after the maf, sucking in unmetered air), just something to check, incase you are still getting lean spoolup with the the new ecu

Florida2403
09-16-2014, 10:16 PM
sent a pm about maf and injectors

240folife
03-01-2015, 07:55 PM
This stuff all sold?

NickS14
03-02-2015, 11:56 AM
PM'd about MAF, inbox full, text me ... 6O9 458 3O7I

ghudson
03-05-2015, 04:38 PM
ALL SOLD close thread