can i use a dsm resistor pack with dsm injectors for my ka-t?

[ryan hagen]

i just picked up a 1g bov, 450cc dsm injectors and i grabbed the resistor pack also off a 90 or 91 gst.

i did the search and found alot of injector and resistor stuff but nothin about the dsm resistors themselfs

so my question is if i use the 450cc fuel injectors with a top feed fuel rail can i wire in the dsm resistor pack? there are 4 wires that leave the pack? how woud i wire it in if i use it? there are 5 wires going into/out of the pack, 4 to the ends of the white rectangles(resistors) and oen going in between the pack of 4. just trying to be as descriptive as possible.

any help is huge, thanks

[ftrs13]

yes, I believe they work, or you could just wire your own 10ohm resistors in line with the injectors and forget about the resistor pack.

dont know what the other wire is, maybe a ground, but I dont see why it would be there

[ryan hagen]

so i need to wire 10ohm in? ok, when i wire them in which wire does it go on? i looked at a pic of the wire harness and it look like 8 wires go into the connector and then turn into 4? i ll get the other side and check next time i go to the junk yard. where can i get the resistors, i know there are some msd ones that u can get to run the msd injectors but would radio shack have them also?