JasonNagra
05-29-2004, 03:45 PM
Sadly sue to my current financial situation I must sell my car. Other things in my life are just more important at this point. My car is a 1991 SE 240sx Hatch. It is maroon and has 148,xxx miles on it. Car runs VERY strong, engine will go forever. I have no need to swap to SR. Chasis and frame is straight never even been in a fender bender, I am the 2nd owner of the car. The interior is entirely gutted. Please send me all offers at [email protected]
I AM NOT PARTING OUT DO NOT ASK
Here are all the mods:
Bone stock KA with K&N Intake, Aurora wires and NGK plugs with all emmissions removed.
Nardi Classico 360mm Wheel / Nismo Hub
Custom Quick Release w/ 2” Spacer
ARC Ti Knob
B&M Shifter
Spin Turn Knob
20% Tint
Chuki Lights
Pulled Fenders
Hella ECE H4 Conversion
Tein HE’s
Avance Front STB
Cucso Rear STB
Dupree Subframe Spacers
SPLT/C Rod
SPL R.U.C.A.
Stich 17x8 +5 / 17x9+11
Potenza RE750 235/40/17 – RE711 255/40/17
GTO Front 5 Lug Hubs
Z32 N/A 5 lug Rear Hubs with Nismo 60mm Studs
26MM Z32 Brakes Front AND Rear
Z32 1 1/16” Master Cylinder
S.S. Brake Lines
KVR Pads
Brembo Rotors
Russel Speed Bleeders
Taka Stainless Clutch Line
Kaaz 2 Way SOLID 16 clutch LSD (volt in to USDM axles)
Newly Replaced OEM Clutch
There are MANY parts I have as well that will be included with the car, some are for turbo, some I just haven't installed. They are:
-Apex’i Intake (for Z32 MAF equiped SR)
-Greddy Turbo Timer Harness for SR
-Brand New Trust DD exhaust fully stainless (waited 6 months from japan never been installed.
-Cusco Exhaust Hangers
-VDO Oil Temp Gauge / Oil Pressure / Water Temp
-VDO Senders
-Blitz Upper Radiator Hose
-Xenon / Nissan motorsports urethan side skirts
-Nismo F+R Brand New 60mm Studs
And many other various parts. I am ONLY selling this car as a package. No parting out. Thanks, Jason.
Pics will be up soon, but most of you have seen it anyway. I have put A LOT of money and TIME into this car. All lowballs will be ignored. VIN is available upon request for CARFAX.
I need to get rid of this car quickly so please let me know if your interested.
I AM NOT PARTING OUT DO NOT ASK
Here are all the mods:
Bone stock KA with K&N Intake, Aurora wires and NGK plugs with all emmissions removed.
Nardi Classico 360mm Wheel / Nismo Hub
Custom Quick Release w/ 2” Spacer
ARC Ti Knob
B&M Shifter
Spin Turn Knob
20% Tint
Chuki Lights
Pulled Fenders
Hella ECE H4 Conversion
Tein HE’s
Avance Front STB
Cucso Rear STB
Dupree Subframe Spacers
SPLT/C Rod
SPL R.U.C.A.
Stich 17x8 +5 / 17x9+11
Potenza RE750 235/40/17 – RE711 255/40/17
GTO Front 5 Lug Hubs
Z32 N/A 5 lug Rear Hubs with Nismo 60mm Studs
26MM Z32 Brakes Front AND Rear
Z32 1 1/16” Master Cylinder
S.S. Brake Lines
KVR Pads
Brembo Rotors
Russel Speed Bleeders
Taka Stainless Clutch Line
Kaaz 2 Way SOLID 16 clutch LSD (volt in to USDM axles)
Newly Replaced OEM Clutch
There are MANY parts I have as well that will be included with the car, some are for turbo, some I just haven't installed. They are:
-Apex’i Intake (for Z32 MAF equiped SR)
-Greddy Turbo Timer Harness for SR
-Brand New Trust DD exhaust fully stainless (waited 6 months from japan never been installed.
-Cusco Exhaust Hangers
-VDO Oil Temp Gauge / Oil Pressure / Water Temp
-VDO Senders
-Blitz Upper Radiator Hose
-Xenon / Nissan motorsports urethan side skirts
-Nismo F+R Brand New 60mm Studs
And many other various parts. I am ONLY selling this car as a package. No parting out. Thanks, Jason.
Pics will be up soon, but most of you have seen it anyway. I have put A LOT of money and TIME into this car. All lowballs will be ignored. VIN is available upon request for CARFAX.
I need to get rid of this car quickly so please let me know if your interested.