SlowCoupe
12-02-2013, 08:42 PM
2003 350z Enthusiast 6spd
Chrome Silver
123xxx
Asking 10,800
Located in New Orleans, La
Title in hand.
Cash is preferred.
Trades may be considered if its an automatic import sedan/suv.
Hi I'm selling my 2003 Nissan 350z. It an enthusiast model with a 6spd transmission. Being an enthusiast model it has crusie control and a viscous limited slip differental a.k. vlsd diff. The paint is a chrome silver(KYO) which is a bright sliver and very easy to keep clean. Now lets talks about the modifications...for power upgrades it has a short ram intake feeding air to a Kinetix Racing V+ plenum. It also has Berk Technology High flow cats mated to a true dual HKS replica exhaust which are both stainless steel. And now for the suspension mods...the front has Whiteline's highperformance urethane bushings, Stance true coilovers. And how can I forget about the beautiful 20in Works T1S in 20x10 and 20x11 in a very agressive offset. Also brand new rear tires(hankook v12s)
I purchased the car used and fixed quite a few parts that had some issues with them. I've replaced the left window motor, drive belts, front right wheel bearings, and 02 sensors with oem nissan parts. The ball joints and bushings were aftermarket parts since nissan does not make replacements. I've also replaced the ugly 03-05 headlights and tail lights with the 06-08 Bi Xenon headlights and LED tail lights. The car also comes with a generic in dash dvd unit.
And now for the bad...the driver side outside seat bolster is torn but temporarily patched up. The 3rd gear synchros are going out and will grind a little depending on how you are shifting. Granny shifting or balls out speed shifts are FINE...but its the ones in between that sometimes grind.
Just added in summer 2013...jwt clutch and lightweight flywheel combo. Added due to replacing broken pivot bolt broken. Replaced with Z1 chromoly bolt. Also replaced with heavy duty clutch fork from 06+ 350z. Rebuilt master and slave cylinder with oem nissan seal/piston kit. Filled trans with redline gear oil.
http://zilvia.net/f/attachment.php?attachmentid=63686&stc=1&d=1386220928
Chrome Silver
123xxx
Asking 10,800
Located in New Orleans, La
Title in hand.
Cash is preferred.
Trades may be considered if its an automatic import sedan/suv.
Hi I'm selling my 2003 Nissan 350z. It an enthusiast model with a 6spd transmission. Being an enthusiast model it has crusie control and a viscous limited slip differental a.k. vlsd diff. The paint is a chrome silver(KYO) which is a bright sliver and very easy to keep clean. Now lets talks about the modifications...for power upgrades it has a short ram intake feeding air to a Kinetix Racing V+ plenum. It also has Berk Technology High flow cats mated to a true dual HKS replica exhaust which are both stainless steel. And now for the suspension mods...the front has Whiteline's highperformance urethane bushings, Stance true coilovers. And how can I forget about the beautiful 20in Works T1S in 20x10 and 20x11 in a very agressive offset. Also brand new rear tires(hankook v12s)
I purchased the car used and fixed quite a few parts that had some issues with them. I've replaced the left window motor, drive belts, front right wheel bearings, and 02 sensors with oem nissan parts. The ball joints and bushings were aftermarket parts since nissan does not make replacements. I've also replaced the ugly 03-05 headlights and tail lights with the 06-08 Bi Xenon headlights and LED tail lights. The car also comes with a generic in dash dvd unit.
And now for the bad...the driver side outside seat bolster is torn but temporarily patched up. The 3rd gear synchros are going out and will grind a little depending on how you are shifting. Granny shifting or balls out speed shifts are FINE...but its the ones in between that sometimes grind.
Just added in summer 2013...jwt clutch and lightweight flywheel combo. Added due to replacing broken pivot bolt broken. Replaced with Z1 chromoly bolt. Also replaced with heavy duty clutch fork from 06+ 350z. Rebuilt master and slave cylinder with oem nissan seal/piston kit. Filled trans with redline gear oil.
http://zilvia.net/f/attachment.php?attachmentid=63686&stc=1&d=1386220928