Bolt on 5 lug hubs, Z32 ebrakes for S13

[MrMcgarrett]

PM me for the fastest response.

Got a set of front and rear 5 lug hubs and Z32 ebrake assemblies that come with everything to bolt on to an S13(sorry S14 owners lol).
Bearings on the hubs are good.
No noise or play.
No stripped studs.
Ebrakes come complete with all hardware, 2+2 cables and custom install brackets.
Direct bolt on.

Hubvs-$320 shipped
Ebrakes-$250 shipped


http://i92.photobucket.com/albums/l5/MrMcgarrett/s13hubs02.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/rear5lughubs_zpsb0a2e103.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/z32ebrakeassemblies001_zps71d8d77d.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/ebrakebrackets002-1_zpsfd793ffd.jpg

[DennisC]

What car did the front hubs come from? Since s13 never came 5 lug?

[LuckyRPS13]

What car did the front hubs come from? Since s13 never came 5 lug?

If you want front hubs you can buy them direct bolt on from many vendor, as far as a junk yard swap you are stuck with S14's but you will need the knuckle, hubs, and front LCA(or a set of new S14 lower ball joints pressed into your S13 Front LCA) all this info can be found if you do a search. very old news.

I very much like the bracket for the ebrake cables. I am about to make some for my car as well.

[DennisC]

If you want front hubs you can buy them direct bolt on from many vendor, as far as a junk yard swap you are stuck with S14's but you will need the knuckle, hubs, and front LCA(or a set of new S14 lower ball joints pressed into your S13 Front LCA) all this info can be found if you do a search. very old news.

I very much like the bracket for the ebrake cables. I am about to make some for my car as well.

I was just wondering what kind of hubs these are. I know that they make conversion hubs and I know I can get the S14 front conversion.

[LuckyRPS13]

Rear you can use S14, or Z32 rear hubs. same part number between the Z32 and S14. I am using S14 hubs with my Z32 ebrake, and brake set up. only other option would be a Q45 or z32 TT but you will have to use the Q45 or Z32 TT rear end with drivers side axle from the Q45 and the Z32 TT. This is a beefy rear end set up.

[DennisC]

Rear you can use S14, or Z32 rear hubs. same part number between the Z32 and S14. I am using S14 hubs with my Z32 ebrake, and brake set up. only other option would be a Q45 or z32 TT but you will have to use the Q45 or Z32 TT rear end with drivers side axle from the Q45 and the Z32 TT. This is a beefy rear end set up.

I already got the z32 rear hubs, just looking for some front hubs now.


Sent from my iPhone using Tapatalk - now Free (http://tapatalk.com/m?id=1)

[MrMcgarrett]

What car did the front hubs come from? Since s13 never came 5 lug?

The fronts are machined J30 hubs with S13 bearings.

[LuckyRPS13]

wow I am blind did not even notice the front lol. Bump for you on J30's

[MrMcgarrett]

Back up to the top.

[holddasoysauce]

Are the z32 ebrake assembly from a NA or TT? Also can you get a shot of the kingpin to hold the ebrake to the upright?

[MrMcgarrett]

They are from a NA car.
I actually have both style anchor bolts for tabbed or non tabbed hubs.

[tunerjunkie]

Would you sell the bracket on its own???

[omgwtf]

sell just the rears text me at 4045787656