x-nobody
05-27-2004, 10:36 AM
1992 Coupe LE - Auto w/ ABS (dead engine)
Parts Car - 1991 FB w/ Hicas - Manual
Transferred over the eninge and tranny, finished most of the easy wiring.. still need to do Vechicle speed sensor and reverse light.
wired up the starter from ignition wire to the clutch and then to the starter.
Car was running fine for a short period then developed the following problems...
HUD turns off a couple seconds after turning the key.
Also if you turn the key and don't start the car the EGI relay starts going nuts. Relay will go out if the key is in and turned to either ON or ACC position..
Also check engine, parking brake and ABS warning light will stay on with key out!
Check ECU code and its 55 so everything is okay..
checked all the grounds and they're good..
And removing the wires for the starter we rigged up does't have an effect either..
Any Ideas ?
Parts Car - 1991 FB w/ Hicas - Manual
Transferred over the eninge and tranny, finished most of the easy wiring.. still need to do Vechicle speed sensor and reverse light.
wired up the starter from ignition wire to the clutch and then to the starter.
Car was running fine for a short period then developed the following problems...
HUD turns off a couple seconds after turning the key.
Also if you turn the key and don't start the car the EGI relay starts going nuts. Relay will go out if the key is in and turned to either ON or ACC position..
Also check engine, parking brake and ABS warning light will stay on with key out!
Check ECU code and its 55 so everything is okay..
checked all the grounds and they're good..
And removing the wires for the starter we rigged up does't have an effect either..
Any Ideas ?