Slims
11-20-2013, 02:02 PM
I have a few items remaining from my part out. I am in the Northern area of SoCal
all items have about 800 miles on them so prices are negotiable, but think before you try to low ball something. I am only selling these items because i changed platforms and engines and these are not the optimal items needed for the build. everything is in perfect working order, so...
Turbo - $1200 (Comp Turbo CT3-6062 .82 AR - t3/t4 this is an oilless turbo!, it uses a grease packing and 3 sets of ceramic ball bearings, meaning the rotational load is lighter than normal steel bearings. and ceramic has naturally less friction and is more resistant to heat damage. it is a billet compressor, a v band exhaust housing with a 3" inlet and 2" out. this is the equivalent to a Garrett GTX35R but uses no oil and spools faster, read up on the technology and you'll see this is a deal. i payed $2400 new.)
KA Turbo manifold - SOLD (DOC Race manifold. it has a 44mm WG flange. this things are bomber proof. on par with Full Race manifolds.)
(Injectors sold, AMS top feed rail - $120) (Precision Top Feed 880 injectors good for 550 on pump gas. this was a set from AMS when they still made kits for the 240sx. it will include their fuel rail and mounting hardware as well.)
Sealed stock KA intake - SOLD (I am more or less charging for the work and tools here. it is a fully sealed for boost intake. all lines have been cut away except for the IAC tube. all ports have been taped and bolted shut, except for a FPR vac line. will come with TB, TPS, and IACV. if you do not have the tools for this, you will spend more money doing it your self.)
Port and polished head with BC internals - SOLD (port and polished head with full set of BC internals. this head has been drilled out to fit 11mm head studs which i can supply. i also have a set of 264 BC cams that i will throw in for $150. include the cams and the head studs will come free)
Spec Clutch - $200 (Spec Stage 3 sprung clutch, not quite fully broken in yet. hold just under 400ft lbs of torque)
High Mount back door intercooler - $125 (i had this put together at a shop to match the PBM high mount setup. same size and specs, fits in front of your Rad and right under the support. )
I have numerous KA parts as well from blocks, heads, pistons, rods, and much more. PM me or text me at 805-252-9650
https://scontent-a-sjc.xx.fbcdn.net/hphotos-ash3/533606_443988262313467_1369965173_n.jpg
all items have about 800 miles on them so prices are negotiable, but think before you try to low ball something. I am only selling these items because i changed platforms and engines and these are not the optimal items needed for the build. everything is in perfect working order, so...
Turbo - $1200 (Comp Turbo CT3-6062 .82 AR - t3/t4 this is an oilless turbo!, it uses a grease packing and 3 sets of ceramic ball bearings, meaning the rotational load is lighter than normal steel bearings. and ceramic has naturally less friction and is more resistant to heat damage. it is a billet compressor, a v band exhaust housing with a 3" inlet and 2" out. this is the equivalent to a Garrett GTX35R but uses no oil and spools faster, read up on the technology and you'll see this is a deal. i payed $2400 new.)
KA Turbo manifold - SOLD (DOC Race manifold. it has a 44mm WG flange. this things are bomber proof. on par with Full Race manifolds.)
(Injectors sold, AMS top feed rail - $120) (Precision Top Feed 880 injectors good for 550 on pump gas. this was a set from AMS when they still made kits for the 240sx. it will include their fuel rail and mounting hardware as well.)
Sealed stock KA intake - SOLD (I am more or less charging for the work and tools here. it is a fully sealed for boost intake. all lines have been cut away except for the IAC tube. all ports have been taped and bolted shut, except for a FPR vac line. will come with TB, TPS, and IACV. if you do not have the tools for this, you will spend more money doing it your self.)
Port and polished head with BC internals - SOLD (port and polished head with full set of BC internals. this head has been drilled out to fit 11mm head studs which i can supply. i also have a set of 264 BC cams that i will throw in for $150. include the cams and the head studs will come free)
Spec Clutch - $200 (Spec Stage 3 sprung clutch, not quite fully broken in yet. hold just under 400ft lbs of torque)
High Mount back door intercooler - $125 (i had this put together at a shop to match the PBM high mount setup. same size and specs, fits in front of your Rad and right under the support. )
I have numerous KA parts as well from blocks, heads, pistons, rods, and much more. PM me or text me at 805-252-9650
https://scontent-a-sjc.xx.fbcdn.net/hphotos-ash3/533606_443988262313467_1369965173_n.jpg