Sstrappjr
11-20-2013, 01:03 AM
I did the CA18det to SR swap in my 13. Everythings good except for the cluster. I can get backlighting, door open, battery an low fuel lights. However I can't get fuel gauge, speedo, RPM, or temp to work. I have 3 clusters to test for each thing I do. CA digital, CA and a KA. From what I read though KA will work for the SR. At least for RPM that is.
Things I have tried so far and found out.
---------------------------------------------------
All fuses all good.
green from ecu to green wire on white connector=nothing
Not getting 12v from green wire with ignition.
made a jumper from my 12v radio to green on ecu=got 12v no indication still
jumper from yellow/red for RPM, nothing still.
with each test I was doing I was getting 12v to some wires to the back of the cluster where it plugs in.
I'm getting power to the wires going into the cluster but not getting any indication into anything.
Any other tests I can do?
Things I have tried so far and found out.
---------------------------------------------------
All fuses all good.
green from ecu to green wire on white connector=nothing
Not getting 12v from green wire with ignition.
made a jumper from my 12v radio to green on ecu=got 12v no indication still
jumper from yellow/red for RPM, nothing still.
with each test I was doing I was getting 12v to some wires to the back of the cluster where it plugs in.
I'm getting power to the wires going into the cluster but not getting any indication into anything.
Any other tests I can do?