JKTUNING
11-18-2013, 09:14 AM
http://www.j-k-tuning.com/NismoTronic/Zilvia/Zilvia-Banner-468x60-NEW.gif (http://www.nismotronic.com/nismotronicsa/jktuning/nismotronicsa-tuning-package_002_30.php)
To place an order, please visit NismoTronicSA Tuning Package (http://www.nismotronic.com/nismotronicsa-package/jktuning/nismotronicsa-tuning-package_002_30.php)
We are a proud new sponsor of Zilvia and would like to spread the word about our new OEM ECU based NismoTronicSA tuning package.
If you don't want to spend thousands on a standalone ECU setup, but are still looking for all the great features, then you are in the right place!
The NismoTronicSA package gives you all of those great features and still allows you to use your original ECU and sensors!
With the addition of a MAP and IAT sensor you can easily convert your vehicle over to speed density and completely remove your MAF sensor from the engine bay!
With the flick of a switch you can switch from low to high boost and/or pump to race gas fuel and ignition maps, all by using our programmable input/output section of the software.
You now have access to up to 4 Fuel and Ignition tables all with expanded 20x20 resolution for more tuning flexibility!
Want to run E85?
No problem! NismoTronic SA has the ability to use any of the 0-5v outputs from a ethanol content analyzer to trim your fuel/ignition/boost depending on how much ethanol is in your tank! Even if you don't use an ECA, you can still run dual maps with pump and E85 by simply using the alternate maps and injector sizing.
Here is a list of some of the main features, but look below for a full list!
Speed Density support (MAP and IAT sensor)
PID Closed Loop Wideband control
Map Switching with 4 Fuel and 4 Ignition maps
Boost by Gear and hi/low switching
User controlled ECU outputs
Flex Fuel sensor support
Nitrous control
Anti-Lag and Full-Throttle Shift
This package includes everything a NEW customer will need to start tuning with the powerful TunerCodeSA based NismoTronicSA Tuning system!
NEMU RT Board Features:
Single USB connection for logging and Emulation (No need for a consult cable!)
SUPER fast realtime emulation and logging (Uploads and Downloads)
4MB Onboard Logging capacity
4 Analog input channels for viewing any 0-5v sensor input (wideband, map sensor, iat, egt, oil pressure)
http://www.j-k-tuning.com/NEMU/Install/NEMU1.jpg
NismoTronicSA Software Features:
RealTime Tuning and Logging via NEMU RT Boards
Onboard Logging via NEMU RT Boards
ADC Inputs for Wideband/IAT/ETC via NEMU RT Boards
User Definable Live Gauges
User Definable Live Graphing
User Definable Monitor Table
Intuitive GUI with visual graphig.
Tons of quick keys for quickly editing table values.
SLC Pure Plus Wideband Support
Innovate Motorsports Wideband Support
AEM UEGO Wideband Support
PLX iMFD Wideband Support
Zeitronix Wideband Support
Program Auto Update Feature
Import/Export Fuel and Ignition tables
Interactive 2D Graphing
RealTime Monitor Tables for each logging item
Export Data Logs to CSV format for viewing in other programs (EXCEL, Virtual Dyno)
http://www.j-k-tuning.com/NismoTronic/SA/ProductImageZilvia.jpg
http://www.j-k-tuning.com/NismoTronic/SA/AltmapSetup.jpg
http://www.j-k-tuning.com/NismoTronic/SA/BBGsetup.jpg
http://www.j-k-tuning.com/NismoTronic/SA/RevLimiters.jpg
http://www.j-k-tuning.com/NismoTronic/SA/FlexFuel.jpg
http://www.j-k-tuning.com/NismoTronic/SA/cylindertrim.jpg
http://www.j-k-tuning.com/NismoTronic/SA/MapSetup.jpg
http://www.j-k-tuning.com/NismoTronic/SA/WidebandSetup.jpg
http://www.j-k-tuning.com/NismoTronic/SA/NitrousOutput.jpg
TunerCodeSA Features:
Load source switching via programmable IO system
Load from MAF, MAP (speed density), or TPS (alphaN)
Map switching via programmable IO system
Alternate and Set2 Maps (4 Fuel and 4 Ignition Maps)
Fuel and Timing Maps expanded from 16x16 to 20x20
Individual cylinder fuel and ignition trims
Closed Loop Wideband PID fuel control with Target AFR table
Nitrous solenoid control with fuel and timing trims
Programmable IO expanded to include:
Digital inputs
4 output ON delay and/or ON delay timer reset timers
Function Outputs for Nitrous trims, Map Switch, and Fuel Cut.
Output control on Limiters
Output control on Knock
Programmable MIL warning indicator
4 Idle PWM settings
Accel and Decel fuel control on TPS and/or MAP
Baro Fuel trim for ITBs running alphaN
IAT Fuel and Timing trims
Density correction for IAT
Knock Control, including individual cylinder knock limits by RPM
Knock enrichment
3 Step Launch Control
"Set Launch" using throttle and gear shift (realtime adjustable 2-step)
AntiLag fuel compensation and ignition retard
FTS (Full Throttle Shift) (w/clutch switch connected)
Cyclic Fuel and Ignition Cut for rev limits and launch control
Flood Clear Fuel Cut
Programmable overrun fuel cut
Fuel Pumpout Control (ON/OFF with Throttle and shifter)
Programmable Injector Timing
ECU-Based PWM Boost Control
AIV/WGsol Output from ECU
High/Low Fixed Duty
High/Low Boost by Gear
IAT boost duty compensation
Overboost limiter
MAF and MAP based load limits
Boost Fuel Compensation
Programmable rev limiter
Enhanced DTC control/logging
Flex Fuel sensor support
Fuel compensation vs flex fuel voltage
Ignition compensation vs rpm vs flex fuel voltage
Boost control duty compensation vs flex fuel voltage
Supported ECUs:
91-93 Nissan Sentra/SE-R/NX2000/Pulsar B13,N14,N15 SR20DE Manual
ECU Part Nos: 64Y00, 64Y01, 67Y00, 68C00, 1N960
91-93 Infiniti G20 P10 SR20DE Manual
ECU Part Nos: 62J00, 62J01, 77J00
91-93 Nissan 240sx S13 SR20DET Manual
ECU Part Nos: 50F00, 50F01, 50F05
91-94 Nissan 240sx S13 KA24DE Manual
ECU Part Nos: 53F00, 53F01
Nissan Pulsar RNN14 SR20DET
ECU Part Nos: 54C00, 54C60
When you purchase this package through the NismoTronic online webstore or in person we will include FREE installation into a customer supplied ECU!
To place an order, please visit NismoTronicSA Tuning Package (http://www.nismotronic.com/nismotronicsa-package/jktuning/nismotronicsa-tuning-package_002_30.php)
To place an order, please visit NismoTronicSA Tuning Package (http://www.nismotronic.com/nismotronicsa-package/jktuning/nismotronicsa-tuning-package_002_30.php)
We are a proud new sponsor of Zilvia and would like to spread the word about our new OEM ECU based NismoTronicSA tuning package.
If you don't want to spend thousands on a standalone ECU setup, but are still looking for all the great features, then you are in the right place!
The NismoTronicSA package gives you all of those great features and still allows you to use your original ECU and sensors!
With the addition of a MAP and IAT sensor you can easily convert your vehicle over to speed density and completely remove your MAF sensor from the engine bay!
With the flick of a switch you can switch from low to high boost and/or pump to race gas fuel and ignition maps, all by using our programmable input/output section of the software.
You now have access to up to 4 Fuel and Ignition tables all with expanded 20x20 resolution for more tuning flexibility!
Want to run E85?
No problem! NismoTronic SA has the ability to use any of the 0-5v outputs from a ethanol content analyzer to trim your fuel/ignition/boost depending on how much ethanol is in your tank! Even if you don't use an ECA, you can still run dual maps with pump and E85 by simply using the alternate maps and injector sizing.
Here is a list of some of the main features, but look below for a full list!
Speed Density support (MAP and IAT sensor)
PID Closed Loop Wideband control
Map Switching with 4 Fuel and 4 Ignition maps
Boost by Gear and hi/low switching
User controlled ECU outputs
Flex Fuel sensor support
Nitrous control
Anti-Lag and Full-Throttle Shift
This package includes everything a NEW customer will need to start tuning with the powerful TunerCodeSA based NismoTronicSA Tuning system!
NEMU RT Board Features:
Single USB connection for logging and Emulation (No need for a consult cable!)
SUPER fast realtime emulation and logging (Uploads and Downloads)
4MB Onboard Logging capacity
4 Analog input channels for viewing any 0-5v sensor input (wideband, map sensor, iat, egt, oil pressure)
http://www.j-k-tuning.com/NEMU/Install/NEMU1.jpg
NismoTronicSA Software Features:
RealTime Tuning and Logging via NEMU RT Boards
Onboard Logging via NEMU RT Boards
ADC Inputs for Wideband/IAT/ETC via NEMU RT Boards
User Definable Live Gauges
User Definable Live Graphing
User Definable Monitor Table
Intuitive GUI with visual graphig.
Tons of quick keys for quickly editing table values.
SLC Pure Plus Wideband Support
Innovate Motorsports Wideband Support
AEM UEGO Wideband Support
PLX iMFD Wideband Support
Zeitronix Wideband Support
Program Auto Update Feature
Import/Export Fuel and Ignition tables
Interactive 2D Graphing
RealTime Monitor Tables for each logging item
Export Data Logs to CSV format for viewing in other programs (EXCEL, Virtual Dyno)
http://www.j-k-tuning.com/NismoTronic/SA/ProductImageZilvia.jpg
http://www.j-k-tuning.com/NismoTronic/SA/AltmapSetup.jpg
http://www.j-k-tuning.com/NismoTronic/SA/BBGsetup.jpg
http://www.j-k-tuning.com/NismoTronic/SA/RevLimiters.jpg
http://www.j-k-tuning.com/NismoTronic/SA/FlexFuel.jpg
http://www.j-k-tuning.com/NismoTronic/SA/cylindertrim.jpg
http://www.j-k-tuning.com/NismoTronic/SA/MapSetup.jpg
http://www.j-k-tuning.com/NismoTronic/SA/WidebandSetup.jpg
http://www.j-k-tuning.com/NismoTronic/SA/NitrousOutput.jpg
TunerCodeSA Features:
Load source switching via programmable IO system
Load from MAF, MAP (speed density), or TPS (alphaN)
Map switching via programmable IO system
Alternate and Set2 Maps (4 Fuel and 4 Ignition Maps)
Fuel and Timing Maps expanded from 16x16 to 20x20
Individual cylinder fuel and ignition trims
Closed Loop Wideband PID fuel control with Target AFR table
Nitrous solenoid control with fuel and timing trims
Programmable IO expanded to include:
Digital inputs
4 output ON delay and/or ON delay timer reset timers
Function Outputs for Nitrous trims, Map Switch, and Fuel Cut.
Output control on Limiters
Output control on Knock
Programmable MIL warning indicator
4 Idle PWM settings
Accel and Decel fuel control on TPS and/or MAP
Baro Fuel trim for ITBs running alphaN
IAT Fuel and Timing trims
Density correction for IAT
Knock Control, including individual cylinder knock limits by RPM
Knock enrichment
3 Step Launch Control
"Set Launch" using throttle and gear shift (realtime adjustable 2-step)
AntiLag fuel compensation and ignition retard
FTS (Full Throttle Shift) (w/clutch switch connected)
Cyclic Fuel and Ignition Cut for rev limits and launch control
Flood Clear Fuel Cut
Programmable overrun fuel cut
Fuel Pumpout Control (ON/OFF with Throttle and shifter)
Programmable Injector Timing
ECU-Based PWM Boost Control
AIV/WGsol Output from ECU
High/Low Fixed Duty
High/Low Boost by Gear
IAT boost duty compensation
Overboost limiter
MAF and MAP based load limits
Boost Fuel Compensation
Programmable rev limiter
Enhanced DTC control/logging
Flex Fuel sensor support
Fuel compensation vs flex fuel voltage
Ignition compensation vs rpm vs flex fuel voltage
Boost control duty compensation vs flex fuel voltage
Supported ECUs:
91-93 Nissan Sentra/SE-R/NX2000/Pulsar B13,N14,N15 SR20DE Manual
ECU Part Nos: 64Y00, 64Y01, 67Y00, 68C00, 1N960
91-93 Infiniti G20 P10 SR20DE Manual
ECU Part Nos: 62J00, 62J01, 77J00
91-93 Nissan 240sx S13 SR20DET Manual
ECU Part Nos: 50F00, 50F01, 50F05
91-94 Nissan 240sx S13 KA24DE Manual
ECU Part Nos: 53F00, 53F01
Nissan Pulsar RNN14 SR20DET
ECU Part Nos: 54C00, 54C60
When you purchase this package through the NismoTronic online webstore or in person we will include FREE installation into a customer supplied ECU!
To place an order, please visit NismoTronicSA Tuning Package (http://www.nismotronic.com/nismotronicsa-package/jktuning/nismotronicsa-tuning-package_002_30.php)