ctsedan
11-18-2013, 06:53 AM
I have a fresh JDM Zenki SR20DET motor set. Im going with diffrent engine in my S13 project.
I had the head redone at local machine shop, most gaskets have been replaced along with some sensors.
Included is the OEM MAF, ECU, harness Tranny.
S14 SR20DET motor, T28 with minimal to no shaft play
Engine compression as follows
#1-145 psi
#2-150 psi
#3-150 psi
#4-145 psi
The compression was done with COLD motor on the ground.
SR20DET tranny, with shifter
S14 SR20DET OEM harness(not converted, but its simple job)
S14 OEM MAF
S14 OEM ECU
Head work done includes new OEM headgasket
Supertech new intake/exhaust guides
Supertech new intake/exhaust valve seals
Head decked and acid cleaned
Complete valve job, lapped, blue checked and pressure checked.
Total 435.00USD
Engine has new Timing chain tensioner
New VTC solenoid
New Intake and Exhaust gaskets
NEW Gates belts
PRICE 2500 OBO
Located in Durham CT for PICK UP Only
I know some people going bitch about price, cosidering you can get motor set from JDM Depot or others for 2100-2300 but YOU dont know what shape that motor is in. MY motor was checked and the head redone including headgasket. IT wont blow up on you in few months..Im open to offers
I had the head redone at local machine shop, most gaskets have been replaced along with some sensors.
Included is the OEM MAF, ECU, harness Tranny.
S14 SR20DET motor, T28 with minimal to no shaft play
Engine compression as follows
#1-145 psi
#2-150 psi
#3-150 psi
#4-145 psi
The compression was done with COLD motor on the ground.
SR20DET tranny, with shifter
S14 SR20DET OEM harness(not converted, but its simple job)
S14 OEM MAF
S14 OEM ECU
Head work done includes new OEM headgasket
Supertech new intake/exhaust guides
Supertech new intake/exhaust valve seals
Head decked and acid cleaned
Complete valve job, lapped, blue checked and pressure checked.
Total 435.00USD
Engine has new Timing chain tensioner
New VTC solenoid
New Intake and Exhaust gaskets
NEW Gates belts
PRICE 2500 OBO
Located in Durham CT for PICK UP Only
I know some people going bitch about price, cosidering you can get motor set from JDM Depot or others for 2100-2300 but YOU dont know what shape that motor is in. MY motor was checked and the head redone including headgasket. IT wont blow up on you in few months..Im open to offers