Intake stud/bolt size. Exhaust aswell.

[dankd]

Bought a 91s13 coupe with the engine pretty much taken apart, So In the process of rebuilding it. I find out im missing quite a few bolts or studs, what ever size stud or bolt it is that is used for the intake manifold. same with exhaust side. Ive looked in the FSM;s coulnt find much, along with google. please help. also Could you buy these at a regular autoparts store

[blueshark123]

almost all bolts on a 240sx are m6x1.0=10mm head m8x1.25=12mm head m10x1.25=14mm head m12x1.25 =17mm head

[dankd]

Can Anyone tell me what studs or bolts to buy, or what size they are, just for the intake manifold to the head.

[dankd]

Bump

Sent from my SCH-M828C using Tapatalk 2

[racepar1]

First of all, do you own a tape measure? You'll have to figure out the kength you want on your own. Most of us buy cars/engines that have all the bolts with them. Those of us that don't have the knowledge to figure it out...


The intake manifold bolts (KA, SR, CA, pretty much ANY other nissan EVER produced) are 8mm x 1.25mm...

[dankd]

Thanks for the help.

[BoredEE]

take a pencil and stick it in the hole until it stops then mark the pencil.

Measure the length of the pencil from the end to the mark.

There's the length you need.

For the thread pitch, go to the hardware store and buy some bolts of different diameters/pitches.

SLOWLY and Carefully try to thread them in. If they bind or don't engage try a different pitch.

For the exhaust I would suggest these:

http://carismastore.com/index.php?l=product_detail&p=1064

I have them on my rb25 and I liked them.