GroundPerformance
11-12-2013, 12:16 PM
I was initially saving this build for later since I've been very busy with work and school. Sadly, My home province Leyte/Samar Philippines has been hit hard with a Super Typhoon "Haiyan" aka "Yolanda". I have relatives and friends that in need of support. This sale will help me support relatives and donate to charitable organizations. I will gladly provide receipts and remittances who buy this from me.
** Please note this is parts only and still need to be put together. I already put together all the pieces needed to make this happen on a budget. If you're local and willing to wait a little I can build and complete it for a extra fee.**
Asking $2100 obo pickup only. Please no need for low-balling and feel free to do some research on individual parts cost. I'm not trying to get rich with this just trying to do what I can to help out. Will not part out.
If you like to Donate you can easily do so via Paypal and pick the organization you wish to donate to.
https://donationsstatic.ebay.com/extend/images/PayPal_Campaigns/Haiyan_CB.jpg
https://www.paypal-donations.com/pp-charity/web.us/campaign.jsp?cid=28
SR20VET Build for Sale;
- P11 SR20VE Cylinder Head
- P11 Intake Manifold
- P11 Fuel Rail and Regulators
- P12 VE Valve Cover
- P12 VE VVL Solenoid
- P12 VE IGN Coilpacks
- P12 Crank Angle Sensor
- New Oil Line & Fittings for VVL
- New ARP Head Studs
- New Cosworth Metal HG
- New BC Dual Valve Springs
- New IN/EX Viton Valve Seals
- New Probe Industries 87mm Forged Pistons 10:1 CR
- S13 RWD SR20DET Shortblock * Crank needs to be turned *
NOTES;
- NO Turbo Assembly included
Parts needed to complete
- Recondition VE Head with new seals and upgraded valve springs.
- Reconditon SR shortblock, Bore to 87mm and cut crank for oversize bearings.
- Recommend new VE oil pump, Forged Rods, quality bearings.
- Typical VE Conversion mods,Oil pickup, Block tapped and Crank Pulley.
* Most of this can be simplified if needed to be PM more info.*
- This setup will not require VVL Oil relocation block oil for the VVL will be supplied
externally from the oil pressure port and back to the head. Basically same setup for LSV Motor.
- Stand alone EMS is great but will not be required. Nistune or Nismotronic will work fine.
http://img189.imageshack.us/img189/463/7iv9.jpg
** Please note this is parts only and still need to be put together. I already put together all the pieces needed to make this happen on a budget. If you're local and willing to wait a little I can build and complete it for a extra fee.**
Asking $2100 obo pickup only. Please no need for low-balling and feel free to do some research on individual parts cost. I'm not trying to get rich with this just trying to do what I can to help out. Will not part out.
If you like to Donate you can easily do so via Paypal and pick the organization you wish to donate to.
https://donationsstatic.ebay.com/extend/images/PayPal_Campaigns/Haiyan_CB.jpg
https://www.paypal-donations.com/pp-charity/web.us/campaign.jsp?cid=28
SR20VET Build for Sale;
- P11 SR20VE Cylinder Head
- P11 Intake Manifold
- P11 Fuel Rail and Regulators
- P12 VE Valve Cover
- P12 VE VVL Solenoid
- P12 VE IGN Coilpacks
- P12 Crank Angle Sensor
- New Oil Line & Fittings for VVL
- New ARP Head Studs
- New Cosworth Metal HG
- New BC Dual Valve Springs
- New IN/EX Viton Valve Seals
- New Probe Industries 87mm Forged Pistons 10:1 CR
- S13 RWD SR20DET Shortblock * Crank needs to be turned *
NOTES;
- NO Turbo Assembly included
Parts needed to complete
- Recondition VE Head with new seals and upgraded valve springs.
- Reconditon SR shortblock, Bore to 87mm and cut crank for oversize bearings.
- Recommend new VE oil pump, Forged Rods, quality bearings.
- Typical VE Conversion mods,Oil pickup, Block tapped and Crank Pulley.
* Most of this can be simplified if needed to be PM more info.*
- This setup will not require VVL Oil relocation block oil for the VVL will be supplied
externally from the oil pressure port and back to the head. Basically same setup for LSV Motor.
- Stand alone EMS is great but will not be required. Nistune or Nismotronic will work fine.
http://img189.imageshack.us/img189/463/7iv9.jpg