PDA

View Full Version : Broken EGR pipe! What to do?


Ghst 01
05-25-2004, 09:21 PM
Well in the process of taking of my headers we broke the EGR tube. So i dunno what to do... the place were it broke is really close the the part that screws in to the down pipe so welding wont work.... so any ideas.... the shit seems really hard to replace ... it goes all the way to the intake manifold somewhere and it runs between the engine and the firewall.....any ideas??????

Bbandit
05-25-2004, 09:55 PM
well.. if i were you, im just going to block the EGR on the intake side.. pull that pipe out and throw it away..
unscrew the bung on the exhaust manifold.. put 2 nickels, and put the bung back in...
Just an Idea of what I would do if I were you.

black s13
05-25-2004, 09:57 PM
*edit* dammit, bandit beat me to the nickels *edit*

nickels. take the pipe completely off, and fill the holes in the header and EGR vacuum thing with a nickel.

Ghst 01
05-25-2004, 10:29 PM
Ok sounds good.... but lets say i wanted the fixed just cuz i live in CA and ima have to do a smog sooner or later..... how much would this type of repair cost?

Jeff240sx
05-25-2004, 11:10 PM
Cheap. Most people (KA-T) remove them, and just put a WTB post up for one. Or, find a FS post for someone parting out a KA (if they swapped to an SR). Then it's just 2 bolts in the rear intake manifold and a new gasket.
-Jeff

Ghst 01
05-26-2004, 12:39 AM
is there any easier way to get to it? it looks like is barried really deep in the intake manifold area... i dont like the idea of taking my hole intake mani area apart,,,

black s13
05-26-2004, 07:13 AM
there is no easier way to get to it, its boleted to the back/bottom of the intake manifold. ive got one sitting on my table, $10 and its yours, shipped.

Ghst 01
05-26-2004, 09:31 AM
there is no easier way to get to it, its boleted to the back/bottom of the intake manifold. ive got one sitting on my table, $10 and its yours, shipped.

Will it fit a S14?

black s13
05-26-2004, 10:50 AM
not sure.... can anyone compare the two?

Ghst 01
05-26-2004, 10:57 AM
Another question.... since i am working OT i can't really spend to much more time on my car..... about how much would this type of repair cost at a shop...... anyone ever had this done to there car?

SilviaSativa
05-26-2004, 03:59 PM
I would just remove it all together! Working on an EGR removal write-up, but may be a few weeks before I'm running & know if everything works!

However, I have an S13 & S14 EGR tube if you would like one. I just compared the two, and they ARE different. PM me if interested.

$10 shipped