SR swap: transmission harness on S14 SR

[rps13_fastback]

Just wondering what needs to be done. Do I swap all my sensors from my KA24E onto my S14 SR tranny and then use my KA24E Harness? Or would it be a lot easier to have the SR tranny harness modified? I plan on sending my harness to be done at heavythrottle so they would do it for free. Let me know guys, I want to send it in this week

TIA

[fliprayzin240sx]

Most shops dont modify lower harness *tranny* cuz most of the time you dont need to use the SRs. Not sure bout KA24Es but DEs it would be alot easier with the KA tranny harness. Basically theres more sensors on the KA *4* than the SR *3* Just pull the correlating sensors from the KA tranny into the SR tranny and plug it. Should be the speed sensor, neutral sensor and reverse. There'll will be an extra one, just tie it up and put it away. Lower harness will then plug back into the SR alternator and starter *iirc* and the fuse box. Thats all there is to it.

[rps13_fastback]

Most shops dont modify lower harness *tranny* cuz most of the time you dont need to use the SRs. Not sure bout KA24Es but DEs it would be alot easier with the KA tranny harness. Basically theres more sensors on the KA *4* than the SR *3* Just pull the correlating sensors from the KA tranny into the SR tranny and plug it. Should be the speed sensor, neutral sensor and reverse. There'll will be an extra one, just tie it up and put it away. Lower harness will then plug back into the SR alternator and starter *iirc* and the fuse box. Thats all there is to it.

cool thanks fliprayzin240sx :cool:

Can anyone verify this for KA24E?