PDA

View Full Version : Digital Torque Wrench Special


brownlinemetalworks.com
11-04-2013, 04:28 PM
http://www.brownlinemetalworks.com/images/wrench.jpg

IT'S BACK !!

Get a jump on your Holiday Shopping and get our Digital Torque Wrench w/ Blow Molded Case for $99 - including shipping. Just go to our website: Brown Line Metalworks, LLC | Professional Grade Digital Torque Wrench (http://www.brownlinemetalworks.com) and click on the "Buy Now" button. At checkout, enter the coupon code: Zilvia

You can see the torque wrench in action in the following video:

cEJsE2vlxxE


Product Specifications

Patented Double Gear Sensing System
Designed, engineered, and tested by Brown Line Metal Works, the patented* D.G.S.S. technology ensures repeatable accuracy of +/- 3.5% both clockwise & counter-clockwise
Accurate from 20 – 100% of full scale (7% accuracy from 10 – 20% of full scale)

Microprocessor Controlled
8-bit electronics ensures accurate readings and simplicity of use
Allows for both Peak and Track mode
Individually calibrates each wrench
Supplies unique serial number for each wrench

Ratchet Head
1/2" drive reversible ratchet
32-tooth gear provides an 11.25º arc while handling high torque loads
Forged from Chromium Vanadium alloy to ensure strength
Conforms to ASME B107.10 2005 standards

Range
15 – 150 ft/lbs
180 – 1,800 in/lbs
20.3 – 203 Nm

Digital Control
Large backlit digital display shows both target torque and current read-out
Intuitive button design makes operating torque wrench simple
LEDs and digital display provide visual feedback when operating wrench
Buzzer creates audible feedback when target torque is reached
Easily switch between ft/lbs, in/lbs, and Nm
Automatically powers off when not in use for 2 minutes
Low battery indicator

Handle
Soft-touch overmold provides comfortable non-slip grip
Engineered plastics ensure an impact resistant housing


The offer is until November 30th, and is only for the lower 48 states.

serah31500
11-04-2013, 06:13 PM
I bought one of these this past June to ease the workload on my snap-on torque wrench and it's been giving me problems ever since right out of the box. It randomly resets the torque settings to 0 and even shuts itself off completely at times. I tried fresh batteries a few times with no luck. I have never dropped this thing so I don't get it..I can't even torque down 1 set of wheels to a car. I'm lucky if I get one side of the car done without something happening. Its cheap and you get what you pay for but I was hoping to get a little more use out of this thing before anything happened.