desertKAdrifter
11-02-2013, 07:09 PM
Well I cant seem to be able to finish my project due to my harsh work schedule and everytime i go in the garage to work on it, i never get any progress, so im over it.
This is a 1992 240sx coupe SE. Power everything and seems to have an aftermarket sunroof. Original 5-speed. slavaged title due to minor damge to radiator support. Front end has been replaced with a mint on and it will come with a mint radiator support that i bought for it.
Bought the car from a guy that got it from the auction down in san diego. I started the registration process and paid all the fees but never got around to smogging, doing a brake light inspection, and vin verification. I had planned to build a track only car so i didnt bother doing all the tests.
The car ran good before i started the kat project. I took the engine out degreased it made it shine, did headgasket job with arp studs and added some goodies before putting back on the car. Now here is the list of the parts intalled on the car/engine:
*cometic headgasket
*ARP head bolts
*new oil pump
*ACT stage 2 clutch
*Fidanza flywheel
*New gaskets every where
*oil sandwich plate with oil press sensor already installed
*New Megan racing mounts (all three)
*excessive intake manifold with oem throttle body
*Godspeed turbo mani
*oem redtop t25 with adjustable wastegate
*N60 maf with pigtail already wired into harness
*All oil lines for turbo
*vacumm lines are in
*catch can lines are in, catch can is included though not installed yet
*sr 370cc injectors on ka fuel rail
Now here are the parts that still need to be installed, remember everything needed to get this girl running and properly tuned are all there just not yet installed, but I'm not doing it, like i said im over it.
*brand new cx racing intercooler system
*used KOYO radiator
* brand new Innovative wideband with narrowband output for ecu
*turbo boost gauge with all hardware, brand new too
*catch can- new from ebay lol
*walbro fuel pump with 240sx s13 install kit, new
*pair of high cfm electrical fans, new
*temp switch for fans
*SAFC 2 with all hardware and manuals
*isis elbow
*godspeed downpipe with flex pipe
* custom 2.5 inch exhaust with dual tips pointing up
* drilled rotors with new pads
I'm sure im forgetting some stuff as i have most parts in boxes still
Now here are some of the OEM parts i removed that i will not be using but that you can have if wanted:
*Complete top and bottom intake manifold with all sensors in working order
* fan and fan clutch
* complete A/c system that was working when pulled out, evrything in engine bay was removed, underdash stuff is still there
* oem headers and downpipe, have some broken studs, but fixable at muffler shop
* stock intake piping and box, oem maf sold already
* charcoal canister although i think i broke the bottom fitting when i removed it sorry
Now for some parts that i bought for this car but that i can sell separate since it is not needed for getting the car running:
* Corbeau FX wide seat
* Corbeau 5 point harness
* Bride low max seat in red, currently at shop getting reupholstered
* No name 4 point harnesses (pair)
* oem sr elbow
The shell itself is in good shape just need paint and if you are picky then it also needs the radiator support replaced with the one i will be providing.
So thats about it, i think. Here is your chance to finish a project and sell for profit or simpply tear it up. I just lost interested and right now I'm more focused on work and buying a house.
Take everything i have mention on here and some other stuff i cant remember for $2500 OR BEST OFFER. Also willing to negotiate if 350z parts get involved.
Willing to part the motorset complete with all the unistalled parts for $1500, Shell itself for $500 (no engine no tranny stock seats)will include 5-speed components except tranny, and corbeau seat and harness for $350, Bride seat $200 reupholstered with non bride fabrics.
I have access to a trialer so if you buy the complete package or shell i can deliver anywhere in socal as long as I get paid for gas.
I'm located in Palm Springs area, 7six0-nine8four-3zero3zero text or call for further questions, thanks
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/1398779_578767735522517_1511509331_o.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/1268820_550265398372751_393523809_o.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/1398268_578768082189149_54861905_o.jpg
This is a 1992 240sx coupe SE. Power everything and seems to have an aftermarket sunroof. Original 5-speed. slavaged title due to minor damge to radiator support. Front end has been replaced with a mint on and it will come with a mint radiator support that i bought for it.
Bought the car from a guy that got it from the auction down in san diego. I started the registration process and paid all the fees but never got around to smogging, doing a brake light inspection, and vin verification. I had planned to build a track only car so i didnt bother doing all the tests.
The car ran good before i started the kat project. I took the engine out degreased it made it shine, did headgasket job with arp studs and added some goodies before putting back on the car. Now here is the list of the parts intalled on the car/engine:
*cometic headgasket
*ARP head bolts
*new oil pump
*ACT stage 2 clutch
*Fidanza flywheel
*New gaskets every where
*oil sandwich plate with oil press sensor already installed
*New Megan racing mounts (all three)
*excessive intake manifold with oem throttle body
*Godspeed turbo mani
*oem redtop t25 with adjustable wastegate
*N60 maf with pigtail already wired into harness
*All oil lines for turbo
*vacumm lines are in
*catch can lines are in, catch can is included though not installed yet
*sr 370cc injectors on ka fuel rail
Now here are the parts that still need to be installed, remember everything needed to get this girl running and properly tuned are all there just not yet installed, but I'm not doing it, like i said im over it.
*brand new cx racing intercooler system
*used KOYO radiator
* brand new Innovative wideband with narrowband output for ecu
*turbo boost gauge with all hardware, brand new too
*catch can- new from ebay lol
*walbro fuel pump with 240sx s13 install kit, new
*pair of high cfm electrical fans, new
*temp switch for fans
*SAFC 2 with all hardware and manuals
*isis elbow
*godspeed downpipe with flex pipe
* custom 2.5 inch exhaust with dual tips pointing up
* drilled rotors with new pads
I'm sure im forgetting some stuff as i have most parts in boxes still
Now here are some of the OEM parts i removed that i will not be using but that you can have if wanted:
*Complete top and bottom intake manifold with all sensors in working order
* fan and fan clutch
* complete A/c system that was working when pulled out, evrything in engine bay was removed, underdash stuff is still there
* oem headers and downpipe, have some broken studs, but fixable at muffler shop
* stock intake piping and box, oem maf sold already
* charcoal canister although i think i broke the bottom fitting when i removed it sorry
Now for some parts that i bought for this car but that i can sell separate since it is not needed for getting the car running:
* Corbeau FX wide seat
* Corbeau 5 point harness
* Bride low max seat in red, currently at shop getting reupholstered
* No name 4 point harnesses (pair)
* oem sr elbow
The shell itself is in good shape just need paint and if you are picky then it also needs the radiator support replaced with the one i will be providing.
So thats about it, i think. Here is your chance to finish a project and sell for profit or simpply tear it up. I just lost interested and right now I'm more focused on work and buying a house.
Take everything i have mention on here and some other stuff i cant remember for $2500 OR BEST OFFER. Also willing to negotiate if 350z parts get involved.
Willing to part the motorset complete with all the unistalled parts for $1500, Shell itself for $500 (no engine no tranny stock seats)will include 5-speed components except tranny, and corbeau seat and harness for $350, Bride seat $200 reupholstered with non bride fabrics.
I have access to a trialer so if you buy the complete package or shell i can deliver anywhere in socal as long as I get paid for gas.
I'm located in Palm Springs area, 7six0-nine8four-3zero3zero text or call for further questions, thanks
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/1398779_578767735522517_1511509331_o.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/1268820_550265398372751_393523809_o.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/1398268_578768082189149_54861905_o.jpg