PDA

View Full Version : CA poor mans v8 swap 240sx FS/FT


brownsnow2
11-01-2013, 04:50 PM
I have been debating selling this for the last 6months. I would prefer trading for a built s13 (meaning not stock suspension unless your engine is a rb25, 1jz or something to that extent). or a very clean s14.
Open to other trade offers or partial trade with cash to me.

located in yuba city, ca, 95993.


1989 240sx coupe. Clean title, 129k miles but odometer/speedometer doesnt work since the motor swap. Motor swap was done about a year ago, new clutch, pressure plate and flywheel, engine is a 98 ford explorer 5.0 that had 70k miles on it when swapped, using 91 mustang t5 manual transmission with short shifter and ecu, aftermarket intake, hydraulic clutch conversion, ford racing headers, 10mm spark plug wires, j30 brakes, 5lug hubs, griffin aluminum radiator, one piece driveshaft, god speed RUCA, tension and traction rods, tein coilovers with camber plates, new rack and pinion, z32 inner and s14 moog outer tie rods with spacers, 17inch 350z rims and some orange and chrome lip 17inch STR rims, Nardia steering wheel, welded differential, power steering and ps cooler, custom kill switch, 350z seats, aftermarket tach. Battery relocated to trunk, Complete interior, hood spacers. Good heater. new power steering pump.



Cons: body damage on rear quarter and dent on front bumper/light area. Straight frame, just had the car aligned, drives straight, No speedometer (needs conversion kit for the t5 to work with the s13). No a/c, car has a bad ground so battery goes dead if not unhooked (that's why there is a nice new kill switch installed).

This car was put together by concept 8 out in Vallejo. Could use a tune since it runs rich. I would have Virgil do it (concept 8) but I live 2.5hrs away from him and these issues don't bother me enough to deal with it. The car runs and drives just fine as it sits.


Price is 4500 or best reasonable offer.

http://i469.photobucket.com/albums/rr59/brownsnow2/Snapbucket/E616D6C1.jpg (http://s469.photobucket.com/user/brownsnow2/media/Snapbucket/E616D6C1.jpg.html)

http://i469.photobucket.com/albums/rr59/brownsnow2/Snapbucket/D4122EA4.jpg (http://s469.photobucket.com/user/brownsnow2/media/Snapbucket/D4122EA4.jpg.html)


http://i469.photobucket.com/albums/rr59/brownsnow2/Snapbucket/E8CDF550.jpg (http://s469.photobucket.com/user/brownsnow2/media/Snapbucket/E8CDF550.jpg.html)


http://i469.photobucket.com/albums/rr59/brownsnow2/Snapbucket/5733DFE4.jpg (http://s469.photobucket.com/user/brownsnow2/media/Snapbucket/5733DFE4.jpg.html)


http://i469.photobucket.com/albums/rr59/brownsnow2/Snapbucket/F605BA59.jpg (http://s469.photobucket.com/user/brownsnow2/media/Snapbucket/F605BA59.jpg.html)

NordicMistBB6
11-01-2013, 05:32 PM
Glws man. Did you use virgils mounts or explorer mounts? I'm just surprised you got the hood to close. (Doing this swap currently)

Sent from my HTC One using Tapatalk

brownsnow2
11-01-2013, 09:33 PM
Virgil's mounts (solid mounts). Hood spacers made it clear the intake but its a tight fit. I will definitely be doing this swap again. Cheap engines and plenty of power to play with

91cupcake240
11-02-2013, 03:35 PM
bump for u.

brownsnow2
11-03-2013, 08:26 PM
Still open for trades. I'm not in a huge rush since there is a drift event at the end of December that I'm planning on attending but I'd still love to have something new to tinker with or cash.

culaphid
11-16-2013, 09:00 AM
I have a 94 1.8 hartop miata let me know

culaphid
11-16-2013, 09:38 AM
Veey interested in this car

brownsnow2
11-16-2013, 10:49 PM
I have a 94 1.8 hartop miata let me know

Thanks but I had a Miata and I don't fit very well in those. Thanks for the offer though

brownsnow2
11-16-2013, 10:51 PM
Veey interested in this car

I'm open to offers. I've had some interest locally but either not enough cash or not the trade offer I want.

culaphid
11-18-2013, 06:21 PM
I have a toyota corolla, its a 99, 5speed near perfect condition. No dents or rips, feeezing ac, etc. I saw you were interested in a different miata that's why I asked about it. I also have a rhd silvia coupe on works wheels/tien super drifts with a built rb25det if you feel like adding a lot of cash. OR, a 00' vw turbo beetle 5apeed with 85k miles. New clutch, etc. 20v 1.8 turbo premium model sunroof heated seats etc. Everything works.
661-858-7027

bymuhh228
11-18-2013, 06:56 PM
Bump for my old car lol

brownsnow2
11-19-2013, 02:08 PM
I have a toyota corolla, its a 99, 5speed near perfect condition. No dents or rips, feeezing ac, etc. I saw you were interested in a different miata that's why I asked about it. I also have a rhd silvia coupe on works wheels/tien super drifts with a built rb25det if you feel like adding a lot of cash. OR, a 00' vw turbo beetle 5apeed with 85k miles. New clutch, etc. 20v 1.8 turbo premium model sunroof heated seats etc. Everything works.
661-858-7027


I will text you later on this week. Yeah i was mostly interested in the miata since it was newer than what I had and I was thinking of trading that locally for another car i was interested in :)

Depends on how much cash you want on top for the rb 240sx but i am interested in that car...or maybe the corolla (at least to sell since under the table smog type of cars are kinda hard to sell when you want to).

The beetle is pushing it, im really not a fan of those cars.

culaphid
11-19-2013, 05:31 PM
I'm sure we can work out a deal. The corolla was just smogged and has fresh tags.

240Kid415
11-19-2013, 06:05 PM
Pm me number


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

brownsnow2
11-26-2013, 02:05 AM
culaphid, i havent messaged you yet but i havent forgotten about you. Just been busy since its the holiday season.

BUMP

Still open to cash or a nice s14.
240kid has a good offer but im still waiting on more info of your car.

TheRealSy90
11-26-2013, 02:27 AM
What's the oil pan clearance like in comparison with the front subframe? Height wise.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

brownsnow2
12-01-2013, 03:55 PM
What's the oil pan clearance like in comparison with the front subframe? Height wise.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)


I can take a picture sometime but its almost flush to the lower subframe (maybe a few mm above it but not by much).

The oil pan is concept 8 custom one and it clears everything and they are tough since its taken a fair amount of hits with just a few dents but zero punctures

brownsnow2
12-04-2013, 09:27 PM
Car has been traded as of today. Thanks for the interest