INeedNewTires
05-22-2004, 10:20 AM
OK up for sale is my brand new Bride Brix I, black on black. brand new perfect condition, need to sell ASAP! Brix one is rare, and black on black is even more rare. This seat is the best seat ever made imo and feels sooo nice. wish i could keep it but have to pay for some wheels i just bought. also, being black on black will make it less likely to be knoticed by thieves, just something to think about if your worried about it getting stolen. If your windows are slightly tinted they wont even know you have a Bride in your car. i want $950 for it OBO
2nd, a PAIR of sol seats. These are pretty sweet, have adjustable sliding brackets but will need to be slightly modified to fit in S13/S14. i have one in my car right now and the front holes line up, but the rears are about an inch too far out. could be fixed by either drilling a hole in floor or welding a small plate w/ a hole in it to accommodate for the extra inch needed. ONLY WANT $200 FOR THE PAIR! obo (+ shipping if needed) These things hold you in, nice support but not huge leg bolsters so you can still get in and out of your car easily.
Next is S13 exhaust. Its a nice quality muffler w. arms already welded in place. Good chrome finish, hardly any scratches or flaws. Great condition, used about 15k miles. sounds really good, deep and resonant, but mostly it flows. Its got Hangers already welded to it that fit perfectly to an S13. just either get pipe made and weld it up, or buy pre-bent mandrel bends and clamp it on for an even cheaper installation. very simple! the finish is very good. i polished it with chrome polish before the pics and it looks nice and shiny. any questions just ask $50 shipped obo!
also have a Z brake setup. Brand New 30mm aluminum Z32 300ZX brakes w/ rotors 4/5lug $450 SHIPPED!! They are in PERFECT new condition. Rotors are brand new, never used, drilled 4 and 5 lug. I will include 6mm spacers so you can clear your stock wheels (doesnt matter what style SE wheel, these will allow you to clear both and you can still use factory lug nuts).
Also will include OEM shims, pads and clips. This is almost everything you need!! You will also need conversion lines, which i will include for an additional $50 for fronts, or $100 for all 4!! no additional shipping costs either! contact me for more info or more pics.
Have a set of 4 great condition SE wheels from S13. They are the "more likely to clear" Z brake style, or the better style ones. near perfect condition, minor curb abrasion but nothing bad. finish is ok, clear coat isint flaking or anything, no bends or dents. $100 bucks for all 4! in case you dont know they are 15x6 +38 4x114.3
Next is various Suspension arms for S13. they are as follows:
All busings are Whiteline polyurethane bushings from www.PDM-Racing.com check there if you want to compare prices so you can see i am charging much less. dont forget about the canadian over the border tax too!
(2) TC rods w/ bushings pressed in. $110 shipped obo
(2) brand new sets of bushings. Fits rear toe arm, RUCA, or traction arm. $40 shipped. S13 OR S14
(2) brand new set of Rear LCA bushing for S13. Still in bag $60 shipped
(2) already pressed in rear toe arms W/ bushings for S13. $120 shipped
(2) already pressed in rear traction arm W/ Bushings For S13. $100 shipped
(4) Already pressed Rear UCA's W/ bushings pressed. For S13 or Z32. $130 shipped
Brand new Cusco front power brace (connects the TC rod brackets) 100 shipped obo
Of course the arms are in good condition. Pics will be available shortly. If you need any other info just contact me one of these ways, but Email is best. Im located in Houston TX.
Pics of EVERYTHING can be found HERE=> http://f2.pg.photos.yahoo.com/ph/fielding03/album?.tok=phnKiJBBa916olSm&.dir=/68c6&.src=ph
cell: 832 443 8088
email: [email protected] << i prefer email!
aim: eauauauau
and of course PM
2nd, a PAIR of sol seats. These are pretty sweet, have adjustable sliding brackets but will need to be slightly modified to fit in S13/S14. i have one in my car right now and the front holes line up, but the rears are about an inch too far out. could be fixed by either drilling a hole in floor or welding a small plate w/ a hole in it to accommodate for the extra inch needed. ONLY WANT $200 FOR THE PAIR! obo (+ shipping if needed) These things hold you in, nice support but not huge leg bolsters so you can still get in and out of your car easily.
Next is S13 exhaust. Its a nice quality muffler w. arms already welded in place. Good chrome finish, hardly any scratches or flaws. Great condition, used about 15k miles. sounds really good, deep and resonant, but mostly it flows. Its got Hangers already welded to it that fit perfectly to an S13. just either get pipe made and weld it up, or buy pre-bent mandrel bends and clamp it on for an even cheaper installation. very simple! the finish is very good. i polished it with chrome polish before the pics and it looks nice and shiny. any questions just ask $50 shipped obo!
also have a Z brake setup. Brand New 30mm aluminum Z32 300ZX brakes w/ rotors 4/5lug $450 SHIPPED!! They are in PERFECT new condition. Rotors are brand new, never used, drilled 4 and 5 lug. I will include 6mm spacers so you can clear your stock wheels (doesnt matter what style SE wheel, these will allow you to clear both and you can still use factory lug nuts).
Also will include OEM shims, pads and clips. This is almost everything you need!! You will also need conversion lines, which i will include for an additional $50 for fronts, or $100 for all 4!! no additional shipping costs either! contact me for more info or more pics.
Have a set of 4 great condition SE wheels from S13. They are the "more likely to clear" Z brake style, or the better style ones. near perfect condition, minor curb abrasion but nothing bad. finish is ok, clear coat isint flaking or anything, no bends or dents. $100 bucks for all 4! in case you dont know they are 15x6 +38 4x114.3
Next is various Suspension arms for S13. they are as follows:
All busings are Whiteline polyurethane bushings from www.PDM-Racing.com check there if you want to compare prices so you can see i am charging much less. dont forget about the canadian over the border tax too!
(2) TC rods w/ bushings pressed in. $110 shipped obo
(2) brand new sets of bushings. Fits rear toe arm, RUCA, or traction arm. $40 shipped. S13 OR S14
(2) brand new set of Rear LCA bushing for S13. Still in bag $60 shipped
(2) already pressed in rear toe arms W/ bushings for S13. $120 shipped
(2) already pressed in rear traction arm W/ Bushings For S13. $100 shipped
(4) Already pressed Rear UCA's W/ bushings pressed. For S13 or Z32. $130 shipped
Brand new Cusco front power brace (connects the TC rod brackets) 100 shipped obo
Of course the arms are in good condition. Pics will be available shortly. If you need any other info just contact me one of these ways, but Email is best. Im located in Houston TX.
Pics of EVERYTHING can be found HERE=> http://f2.pg.photos.yahoo.com/ph/fielding03/album?.tok=phnKiJBBa916olSm&.dir=/68c6&.src=ph
cell: 832 443 8088
email: [email protected] << i prefer email!
aim: eauauauau
and of course PM