FS/FT 89 s13 - BN type 2 - Fresh sr20det - Gt2871R - Work VS-XX - Fresh paint + MORE!

[drftx]

I think it is time to move on and finally let go of my s13. Thinking of getting a BRZ/FRS or something a little bit newer.

The motor was just finished and has about 400 miles on it. I properly broke it in and it is currently ready for a tune

I broke the engine in with AMS oil and im going to do its first oil change with AMS oil also

K&N oil filters is what I used

Looking for 14k OBO

Entertaining trades - 350z, S2000, and so on

Here is the link to the build thread

I have a folder of ALL the work done to the car

http://zilvia.net/f/builds-builds-only/418343-89-coupe-build-windy-city.html

Engine -

Freshly built motor by Pavel racing engines, bottom end is stock rebuilt with all the studs + hardware are all ARP, all the bearings are all ACL. Top end is built with mods listed below. (Comes with documents of all of the work done clearances, spec sheet and all of the good stuff. Block was built for a reliable 400 hp)

All brand new OEM gaskets all around
All of the hardware was replaced with ARP
All of the bearings was replaced with ACL
Polished and balanced Crank shaft
Hot tanked and cleaned and re-surfaced head + block
New freeze plugs
Brian Crower 264 Intake cam
Brian Crower 264 Exhaust cam
Brian Crower TI retainers
Brian Crower Valves
Cometic HG
OEM s14 piston rings
Brand new S13 pistons
Brand new S14 timing chain cover with S14 oil pump
Brand new S14 water pump
Brand new S14 water neck
Brand new OEM S13 Thermostat
Brand new OEM S13 Timing chain
Brand new OEM S13 Timing chain guides
Gold Touge Factory Pulleys
Tomei RAS
Probably forgetting some other stuff this is just on the top of my head

Forced induction -

Brand new GT2871R .64 AR (This was built new when the motor was built so it has around 400 miles
Retro fitted HKS waste gate actuator
Greddy LM intercooler
Megan exhaust manifold
Polished Isis Intake manifold
Freddy BOV
Touge Factory Hot pipe
Circuit sport Braided lines
BLITZ LM intake filter

Exhaust -

Custom 3" blast pipes 4" tips
Greddy down pipe
Megan test pipe

Cooling -

Brand new Mishimoto S13 radiator
Brand new isis radiator hose's
Brand new Blitz Radiator cap
OEM Sr20det Clutch Fan
OEM Sr20det Fan shroud

Fuel delivery -

Walboro 255 fuel pump
Sard 850cc side feed injectors (not installed)
Circuit sport side feed fuel rail (not installed)
Z32 Fuel filter

Exterior -

DOES NOT COME WITH THE VOLTEX WING
DOES NOT COME WITH THE VOLTEX WING

S13 Silvia brick headlights (Minty looks brand new out of the box)
S13 Silvia headlight brackets
Xantec HID
Circuit sport clear corners
GTR grill
Origin +20mm front silvia fenders
Origin +50mm rear over fenders
BN sports type II replica (Front + rear is chaser - Side skirts are ED )
Single vent fiberglass Silvia hood
Fanador Side mirros ( The better one )
Circuit sport clear tail lights

Interior -

Boss hub
Old school Nismo 330mm steering wheel
Full black interior ( Used to be brown )
Tomei shift knob
Black Bride gradiaton on the door panels, center console
Canada Bride zieg III
Nagisa super low seat rails
Retro fitted S14 rear seats
Has shitty carpet but I have new carpet that comes with the car

Electronics -

Apexi Power FC
Autometer phantom boost gauge
Autometer phantom water temp gauge
STACK pro control oil pressure gauge
Brand new sony xplode front speakers
JL audio amp
JL audio 12" sub
JVC head unit

Suspension -

Stance GR+ or SS+ coilovers how ever you want to call it
Stance RUCA
Stance Toe rods
Stance Traction arms
Stance Tension arms
Touge factory Inner tie rod
Touge factory outer tie rod
Withe the steering angle spacer
Energy Steering rack bushings
Whiteline front and rear Sway bar links

Wheels -

Work VS-XX
18x9.5+0 - Feddy 595 215-40-18
18x10.5+5 - Feddy 595 235-40-18
Blue Work RS lugnuts

Misc -

ACT stage 3 6 puck un sprung clutch
Battery relocated to the trunk
Circuit sport oil catch can
Brand new gas tank
Stance Sr30det water neck temp adaptor
Welded diff
5 lug conversion
Slotted and drilled rotors
Autozone rebuilt front and rear calipers
New power steering pump
Autozone front and rear pads

Work was done by - Touge Factory and RCN motors

Engine swap was done by my good friend

CONS -

Slight coolant leak I think its coming from the top heater line not to sure
Transmission output seal needs to be replaced
Drivers side axle boot has a hole
drivers rocker has a small hole

I am probably forgetting stuff the list was just on top of my head feel free to pm me with any questions or email me.

[email protected] or PM me

IF I do not get any decent offers I WILL BE PARTING IT OUT

http://i263.photobucket.com/albums/ii132/rps13ac/20131013_190628_zps7de44318.jpg

https://sphotos-b.xx.fbcdn.net/hphotos-frc1/887248_507785435926441_869165356_o.jpg

http://i263.photobucket.com/albums/ii132/rps13ac/20131013_190941_zps1e85608e.jpg

http://i263.photobucket.com/albums/ii132/rps13ac/20131013_191046_zpsb15b5d6a.jpg

http://i263.photobucket.com/albums/ii132/rps13ac/20131013_191034_zps70a0a977.jpg

http://i263.photobucket.com/albums/ii132/rps13ac/20131013_191019_zps0e9a342f.jpg

http://i263.photobucket.com/albums/ii132/rps13ac/2013-09-17_1414_zpsc2c5718b.png

http://i263.photobucket.com/albums/ii132/rps13ac/2013-09-17_1415_zps21bd9ce7.png

https://scontent-b-ord.xx.fbcdn.net/hphotos-ash3/q71/s720x720/994623_10151849159375100_889748119_n.jpg

http://i26.photobucket.com/albums/c112/okarl/1380259753_zpsa6e7302a.jpg

https://scontent-a-ord.xx.fbcdn.net/hphotos-frc1/578721_678879655455863_1949508804_n.jpg

https://scontent-a-ord.xx.fbcdn.net/hphotos-ash3/1383374_186755888177459_247512291_n.jpg

http://i263.photobucket.com/albums/ii132/rps13ac/2013%20build/IMG_20130727_192424_zps509c7248.jpg

http://i263.photobucket.com/albums/ii132/rps13ac/2013%20build/IMG_20130727_182827_zps519c63b5.jpg

http://i263.photobucket.com/albums/ii132/rps13ac/2013%20build/20130727_180932_zpse8825f20.jpg

http://i263.photobucket.com/albums/ii132/rps13ac/2013%20build/IMG_20130719_212502_zps634bd202.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-ash4/1069980_520684171319095_1287185515_n.jpg

http://i263.photobucket.com/albums/ii132/rps13ac/IMG_20130406_152944_zps6fb785aa.jpg

http://i263.photobucket.com/albums/ii132/rps13ac/20130406_143833_zpsc661bf2b.jpg

http://i263.photobucket.com/albums/ii132/rps13ac/20130522_202603_zps23546a04.jpg

http://i263.photobucket.com/albums/ii132/rps13ac/IMG_20130529_104936_zpse99c853a.jpg

http://1.bp.blogspot.com/-emL6XXoXSXM/UTH-2w2SVsI/AAAAAAAACZ8/vjUNTA4M4A8/s400/240+108.JPG

http://i263.photobucket.com/albums/ii132/rps13ac/20130216_133452_zps2c407c61.jpg

http://i263.photobucket.com/albums/ii132/rps13ac/IMG_20130606_152159_zps9957ea96.jpg

[streetsweepers]

Why you sellin this thing man? This was one of my favorite build thread cars of all time, regardless GLWS

[Tomeis15]

Sick bro love that nismo wheel just curious tho where did u get that review sticker at ?

[hobbs]

Ever get it tuned?

[ill_s13]

I'd be interested in work lug nuts if you part it out....Also want to sell that wing since you're not including it? or saving it for the next car?

[brian310]

trade for 300 stolen ipods?

[drftx]

Why you sellin this thing man? This was one of my favorite build thread cars of all time, regardless GLWS

Thanks! I want to get in something new - 350z, s2000, but got my heart set on a FRS/BRZ


Sick bro love that nismo wheel just curious tho where did u get that review sticker at ?

I got it from Nakagawa him self I will be taking off all of the stickers before the car is sold. Most of the stickers that are on the car are gifts from different car teams that means a lot.

Ever get it tuned?

Nope not yet I was going to get it tuned but didn't bother because Im selling it.

I'd be interested in work lug nuts if you part it out....Also want to sell that wing since you're not including it? or saving it for the next car?

Never selling the voltex wing ever if I do it will be $1400

[shotcaller1681]

At first I saw the price and was like here we go again but then I saw everything else and now it all makes since lol

[Fulmer]

Sweet build bro. I've seen this car before. Looking good. 14k is pretty decent obo price. You must've fixed all that rotting and rust from underneath the car. GLWS. Please refer to the body shop you had it fixed at. It you were able to get it fixed I have faith in fixing mine now too. Hope you get what you want!

[drftx]

At first I saw the price and was like here we go again but then I saw everything else and now it all makes since lol

Thank you if anything ill be parting it out if there is no interest price is like that for lowballers and it is obo

Sweet build bro. I've seen this car before. Looking good. 14k is pretty decent obo price. You must've fixed all that rotting and rust from underneath the car. GLWS. Please refer to the body shop you had it fixed at. It you were able to get it fixed I have faith in fixing mine now too. Hope you get what you want!

Thanks. It was fixed by the previous owner.



Bump #1 obo toss me trade offers/cash offers

[iConformed]

If you decide to part out let me know, I'd be interested in a few things and I'm local!

GT2871R
Circuit Sports Clear Corners and Tails
Fanador Side Mirrors
Intake Manifold
Hot Pipe

[drftx]

If you decide to part out let me know, I'd be interested in a few things and I'm local!

GT2871R
Circuit Sports Clear Corners and Tails
Fanador Side Mirrors
Intake Manifold
Hot Pipe

More than likely I will be parting it out BUT I will be keeping my motor set up because a SR32 might happen if it does not ill be parting the motor.

[iConformed]

More than likely I will be parting it out BUT I will be keeping my motor set up because a SR32 might happen if it does not ill be parting the motor.

Dang, well turbo is what I'm most interested in :facepalm:. Well keep me posted, thanks!

[Ichiban4]

bump for one of the nicest stateside cars

[young simba]

thats why i love northern illinois i miss it too !!!!!!!!!!

[d-what?]

Was one of my favorite builds on zilvia, best of luck with selling!

[drftx]

bump for one of the nicest stateside cars

Thank you I promise you the next one is gonna be better

thats why i love northern illinois i miss it too !!!!!!!!!!

Its too cold here lol

Was one of my favorite builds on zilvia, best of luck with selling!

Thanks! If anything parting it out

[drftx]

10k no wheels????

[drftx]

open for trades!!!!!!!!!!!!!!!!!!!!!!!!

[(r)ps13]

Damn.... Just... Damn... This thing takes me back to amateur drift day at Mobara Twin Circuit... I agree with everyone, one of the best builds on Zilvia! GLWS!

[Hatemy7]

More than likely I will be parting it out BUT I will be keeping my motor set up because a SR32 might happen if it does not ill be parting the motor.


nice car but what is a SR32?


also Id be interested in that front end also for my coupe.

[TeamFRAT]

SR-- R32


Good luck. Get this stuff sold homes