Built S13 SR20DET partout!!!!!!!!!!!!!

[lilbnort93]

Have an opportunity to get a great deal on a buddys motor so my stuff is going up for sale. Most of it im pretty firm but don't be afraid to shoot a reasonable offer.

*** Also forgot I got a crank too that's in good condition. $100


Built s13 blacktop head comes with
BC valves
BC valve springs
BC retainers
Supertech valve guides
new valve stem seals
head had a three angle valve job and fresh resurface by Matt at HPS cylinder head in Tarpon FL.
$600

Block was bored to 87mm, honed, hot tanked, decked comes with main caps and girdle: $200
CP 11:1 cr 87mm pistons brand new on stock rods: $400
will sell block and pistons and rods together for $500
ARP Head studs: SOLD
ARP Main studs: $100
Cometic mls 87mm head gasket: $100
SR20 starter: $80
Blacktop s13 sr valve cover: $80
Stock sr cast manifold: $20
Upper oil pan: $40
lower oil pan: $20
Front cover with oil pump: $80 looks to be low mileage SOLD
s13 sr CAS: $80
S13 sr coil packs with harness: $80
S13 sr intake manifold bead blasted with new iacv and throttle body gasket: $60SOLD
KA/SR knock sensor with harness: $40
KA24de transmission: $120
Sr20det bellhousing $40
S13 sr20det wiring harness with ignitor chip not hacked good condition: $100


I have other little misc sr parts too just ask and ill let you know if I have them


https://scontent-a-mia.xx.fbcdn.net/hphotos-prn2/q72/s720x720/1379693_616500361734473_1811664647_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-frc3/q73/s720x720/1375310_616500398401136_911608315_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-frc3/q71/s720x720/1377250_616500428401133_1617444872_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-prn2/q75/s720x720/1390702_616500451734464_2091892923_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-prn1/q77/s720x720/1395211_616500488401127_1240559119_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-ash4/q75/s720x720/1378778_616500508401125_224780101_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-ash3/q77/s720x720/1391951_616500538401122_264177895_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-prn2/q79/s720x720/1378154_616500555067787_1955543903_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-frc3/q77/s720x720/1391570_616500595067783_2051697255_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-frc3/q71/s720x720/1382233_616500631734446_1248883514_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-frc3/q75/s720x720/1390653_616500665067776_1706448676_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-ash3/q79/s720x720/528269_616500708401105_533652747_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-frc1/q77/s720x720/64204_616500745067768_790122574_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-prn2/q77/s720x720/1374303_616500765067766_1229445400_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/q83/s720x720/1379715_616500808401095_244335554_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/q83/s720x720/1379715_616500808401095_244335554_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-frc3/q82/s720x720/1385047_616500835067759_1719607298_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-prn2/q75/s720x720/1395975_616500881734421_811630284_n.jpghttps://scontent-b-mia.xx.fbcdn.net/hphotos-frc3/q81/s720x720/1385247_616500911734418_1033259937_n.jpg[/IMG]

[lucas240sx]

I need bolt tensioner off the sr alt

[lilbnort93]

I need bolt tensioner off the sr alt

just replied with a pm

[redjet]

i need an ecu pm me

[lilbnort93]

i need an ecu pm me

unfortunately I do not have an ecu. that's gone

[lilbnort93]

head studs are sold

[lilbnort93]

shoot me some offers guys

[lilbnort93]

bump it up guys also have a built s14 sr for sale. check my other threads!

[SlmdCpe]

I want the block, pistons and rods.

Pm me!

[1luvsilvias]

I will take the bellhousing where are you located?


Sent from my iPhone using Tapatalk - now Free (http://tapatalk.com/m?id=1)

[1luvsilvias]

Have an opportunity to get a great deal on a buddys motor so my stuff is going up for sale. Most of it im pretty firm but don't be afraid to shoot a reasonable offer.

*** Also forgot I got a crank too that's in good condition. $100


Built s13 blacktop head comes with
BC valves
BC valve springs
BC retainers
Supertech valve guides
new valve stem seals
head had a three angle valve job and fresh resurface by Matt at HPS cylinder head in Tarpon FL.
$600

Block was bored to 87mm, honed, hot tanked, decked comes with main caps and girdle: $200
CP 11:1 cr 87mm pistons brand new on stock rods: $400
will sell block and pistons and rods together for $500
ARP Head studs: SOLD
ARP Main studs: $100
Cometic mls 87mm head gasket: $100
SR20 starter: $80
Blacktop s13 sr valve cover: $80
Stock sr cast manifold: $20
Upper oil pan: $40
lower oil pan: $20
Front cover with oil pump: $80 looks to be low mileage
s13 sr CAS: $80
S13 sr coil packs with harness: $80
S13 sr intake manifold bead blasted with new iacv and throttle body gasket: $60
KA/SR knock sensor with harness: $40
KA24de transmission: $120
Sr20det bellhousing $40
S13 sr20det wiring harness with ignitor chip not hacked good condition: $100


I have other little misc sr parts too just ask and ill let you know if I have them


https://scontent-a-mia.xx.fbcdn.net/hphotos-prn2/q72/s720x720/1379693_616500361734473_1811664647_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-frc3/q73/s720x720/1375310_616500398401136_911608315_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-frc3/q71/s720x720/1377250_616500428401133_1617444872_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-prn2/q75/s720x720/1390702_616500451734464_2091892923_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-prn1/q77/s720x720/1395211_616500488401127_1240559119_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-ash4/q75/s720x720/1378778_616500508401125_224780101_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-ash3/q77/s720x720/1391951_616500538401122_264177895_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-prn2/q79/s720x720/1378154_616500555067787_1955543903_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-frc3/q77/s720x720/1391570_616500595067783_2051697255_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-frc3/q71/s720x720/1382233_616500631734446_1248883514_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-frc3/q75/s720x720/1390653_616500665067776_1706448676_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-ash3/q79/s720x720/528269_616500708401105_533652747_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-frc1/q77/s720x720/64204_616500745067768_790122574_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-prn2/q77/s720x720/1374303_616500765067766_1229445400_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/q83/s720x720/1379715_616500808401095_244335554_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/q83/s720x720/1379715_616500808401095_244335554_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-frc3/q82/s720x720/1385047_616500835067759_1719607298_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-prn2/q75/s720x720/1395975_616500881734421_811630284_n.jpghttps://scontent-b-mia.xx.fbcdn.net/hphotos-frc3/q81/s720x720/1385247_616500911734418_1033259937_n.jpg[/IMG]

If you still have the bellhousing and main studs by Friday I will like to make an offer for a package deal for and I will pay for shipping. If you are interested let me know


Sent from my iPhone using Tapatalk - now Free (http://tapatalk.com/m?id=1)

[lilbnort93]

If you still have the bellhousing and main studs by Friday I will like to make an offer for a package deal for and I will pay for shipping. If you are interested let me know


Sent from my iPhone using Tapatalk - now Free (http://tapatalk.com/m?id=1)

I am supposed to be getting a payment for the main studs Friday already. And I'd prefer not to ship the bellhousing as it would be pretty expensive.

[Mandooh240]

Coil Pack Harness
Txt 9092136746
Shipped to 91767

[lilbnort93]

Coil Pack Harness
Txt 9092136746
Shipped to 91767

I sent you a pm let me know

[1luvsilvias]

Have an opportunity to get a great deal on a buddys motor so my stuff is going up for sale. Most of it im pretty firm but don't be afraid to shoot a reasonable offer.

*** Also forgot I got a crank too that's in good condition. $100


Built s13 blacktop head comes with
BC valves
BC valve springs
BC retainers
Supertech valve guides
new valve stem seals
head had a three angle valve job and fresh resurface by Matt at HPS cylinder head in Tarpon FL.
$600

Block was bored to 87mm, honed, hot tanked, decked comes with main caps and girdle: $200
CP 11:1 cr 87mm pistons brand new on stock rods: $400
will sell block and pistons and rods together for $500
ARP Head studs: SOLD
ARP Main studs: $100
Cometic mls 87mm head gasket: $100
SR20 starter: $80
Blacktop s13 sr valve cover: $80
Stock sr cast manifold: $20
Upper oil pan: $40
lower oil pan: $20
Front cover with oil pump: $80 looks to be low mileage
s13 sr CAS: $80
S13 sr coil packs with harness: $80
S13 sr intake manifold bead blasted with new iacv and throttle body gasket: $60
KA/SR knock sensor with harness: $40
KA24de transmission: $120
Sr20det bellhousing $40
S13 sr20det wiring harness with ignitor chip not hacked good condition: $100


I have other little misc sr parts too just ask and ill let you know if I have them


https://scontent-a-mia.xx.fbcdn.net/hphotos-prn2/q72/s720x720/1379693_616500361734473_1811664647_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-frc3/q73/s720x720/1375310_616500398401136_911608315_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-frc3/q71/s720x720/1377250_616500428401133_1617444872_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-prn2/q75/s720x720/1390702_616500451734464_2091892923_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-prn1/q77/s720x720/1395211_616500488401127_1240559119_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-ash4/q75/s720x720/1378778_616500508401125_224780101_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-ash3/q77/s720x720/1391951_616500538401122_264177895_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-prn2/q79/s720x720/1378154_616500555067787_1955543903_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-frc3/q77/s720x720/1391570_616500595067783_2051697255_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-frc3/q71/s720x720/1382233_616500631734446_1248883514_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-frc3/q75/s720x720/1390653_616500665067776_1706448676_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-ash3/q79/s720x720/528269_616500708401105_533652747_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-frc1/q77/s720x720/64204_616500745067768_790122574_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-prn2/q77/s720x720/1374303_616500765067766_1229445400_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/q83/s720x720/1379715_616500808401095_244335554_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/q83/s720x720/1379715_616500808401095_244335554_n.jpg
https://scontent-a-mia.xx.fbcdn.net/hphotos-frc3/q82/s720x720/1385047_616500835067759_1719607298_n.jpg
https://scontent-b-mia.xx.fbcdn.net/hphotos-prn2/q75/s720x720/1395975_616500881734421_811630284_n.jpghttps://scontent-b-mia.xx.fbcdn.net/hphotos-frc3/q81/s720x720/1385247_616500911734418_1033259937_n.jpg[/IMG]




Sent from my iPhone using Tapatalk - now Free (http://tapatalk.com/m?id=1)

[1luvsilvias]

I am supposed to be getting a payment for the main studs Friday already. And I'd prefer not to ship the bellhousing as it would be pretty expensive.

The bellhousing shouldn't be much using ground standard rate but I know it's free us postage anywhere to any address I can pay for the box at the post office if you like.


Sent from my iPhone using Tapatalk - now Free (http://tapatalk.com/m?id=1)

[lilbnort93]

The bellhousing shouldn't be much using ground standard rate but I know it's free us postage anywhere to any address I can pay for the box at the post office if you like.


Sent from my iPhone using Tapatalk - now Free (http://tapatalk.com/m?id=1)

I'd rather sell it local

[lilbnort93]

bump .

[lilbnort93]

bump few things have some interest. lets get it sold

[lilbnort93]

offers guyssssssss

[lhdsileighty]

i'll take the short block hit me up with a shipping qoute to 13324

[kilamax03]

willing to ship the head? any pics of it

[blades13.5]

Interested in Wiring harness. Pm me.
Price shipped to 93710?

[lilbnort93]

bump it uppp

[lilbnort93]

shoot me offers guys

[lilbnort93]

need to get my shitbox running. buy this

[Rusty Domo]

do you have a crankshaft ?

[lhdsileighty]

500 shipped for the shortblock to 13324

[lilbnort93]

500 shipped for the shortblock to 13324
pm'd

...........

[JAStirrett]

interested in the stock SR mani? Shipped to 33579?

[lilbnort93]

head sold tttttttt

[lilbnort93]

bump for selling a few things

[joedirt513]

i need a cam sensor and power steering pump. pm me or text 513.520.7902

[Mandooh240]

Wiuld you be interested in parting out a single coil pack and coil harness?

[lilbnort93]

Wiuld you be interested in parting out a single coil pack and coil harness?

willing to sell them all together for $40 if interested