View Full Version : NY Rb25 swap with spares
Joedrt
10-11-2013, 09:01 PM
Rb25 swap in the car still runs and drives. Spare block crank and head. Will come with ecu and harness. Motor is stock with the norms. Always maintained oil was changed every 1000 miles due to low driving and a lot of sitting in the garage. May be willing to part the lot of spares but please don't ask for odd ball stuff like the head alignment dowels or the crank keyway. No reasonable offers refused. I'll post pics soon
Joedrt
10-13-2013, 05:07 PM
Bump nĂºmero uno
Slammedzenki
10-16-2013, 07:46 AM
The spare swap have a complete intake manifold? May also be interested in harness and ecu. Also is it a series 1 or series 2 thanks.
Joedrt
10-16-2013, 12:57 PM
I'm not parting out the motor set and the spare is a short block
Joedrt
10-16-2013, 02:23 PM
Series 1 for the motor set and the short block is what ever harness you have
Slammedzenki
10-16-2013, 03:51 PM
I misread it. I thought the harness and ecu was with the spare stuff.
smmsak
10-16-2013, 07:38 PM
How much for the head? Or the running engine and can it be shipped?
s4yers
10-16-2013, 11:36 PM
hey I just need the male side of the egt sensor on ur engine harness, how much shipped to 10309? wiling to paypal ASAP
NAVY-ET
10-17-2013, 04:38 AM
How much for the whole swap
Sent from my SAMSUNG-SGH-I337 using Tapatalk
CharCharXD
10-17-2013, 11:44 AM
youre selling a full swap or? what chassis is this for?
KoukiKid
10-17-2013, 01:18 PM
x2 on which chassis it's for. also is it a full drop in swap?
s4yers
10-17-2013, 02:22 PM
it's in the skyline that it was imported with, I've driven it as well as have been driven in it countless times and can definitely vouch for how solid this setup is. very little needed to make this swap into regardless what your setup is and tons of extra parts, glws
Joedrt
10-17-2013, 03:53 PM
It's for a skyline I blew up my ls. I put it back in the car to move the car around. was never in an s chassis but will come with the 33 crossmember harness ecu as well as an oil filter relocation spare block crank head and valve covers only thing I'm keeping is the power steering pump as it will be grafted to the ls
Joedrt
10-17-2013, 03:54 PM
Can use the 33 harness or get the chase bays one
Joedrt
10-17-2013, 06:03 PM
3k for everything that I have rb related oil was and still is changed every 1000 miles and always starts up fine and runs like a top
Joedrt
10-19-2013, 04:52 PM
Bump number 2
Joedrt
10-20-2013, 01:25 AM
2500 picked up can see it run and drive
Joedrt
10-29-2013, 09:49 AM
Buuuuuuuummmmmmmmppppppppp
Joedrt
10-30-2013, 03:40 PM
2200 need this gone
Joedrt
10-31-2013, 10:20 AM
1900 until sunday
Joedrt
11-01-2013, 06:14 PM
Someone buy this. Will ship if the buyer pays for it and PayPal fees as well or can pick it up. I will not pull the motor out until I have a deposit
Tan-R
11-01-2013, 06:59 PM
how much for the block with rotating assembly?
Joedrt
11-01-2013, 07:13 PM
There's no pistons or rods thinking 250
Joedrt
11-02-2013, 06:07 PM
1900 until 12am monday come on somebody must want a full rb swap
hokie240
11-02-2013, 06:14 PM
Where are you located in NY?
Joedrt
11-02-2013, 06:19 PM
Staten island
hokie240
11-02-2013, 09:31 PM
Sent you PMs.
Joedrt
11-02-2013, 11:03 PM
Replied to your pms
Joedrt
11-03-2013, 08:39 AM
14 more hours bump
Joedrt
11-03-2013, 01:01 PM
9 more hours on this sale. Send me a deposit to hold the 1900 or it goes back to 2200
Joedrt
11-04-2013, 06:23 AM
Bump need this gone ill even throw in a cometec intake gasket and a brand new oilpan from the dealer
Joedrt
11-05-2013, 01:20 PM
Deposit taken still have the block and head
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.