PDA

View Full Version : MD HKS V3 bov


Rays_240
10-09-2013, 06:21 PM
This is not an ebay knock off, I purchased it new from frsport. Ive been running a tial for a bit now and would like to get rid of this. Comes with a used weld on flange, stainless c-clip, and o-ring. I have the recirc. fitting and original box also. Some of the silver paint is coming off as seen in pics. $80 obo...

http://i282.photobucket.com/albums/kk265/l2aymond/13883_10151976936967122_1643348222_n_zps4138272a.j pg

http://i282.photobucket.com/albums/kk265/l2aymond/1380743_10151976936962122_908425934_n_zps575861cb. jpg

Rays_240
10-10-2013, 12:08 PM
I found the finned fitting!

PowerDrifter
10-10-2013, 02:01 PM
can you take better pics of the bolts. the hologram side bolts those are blurry and the bottom part and the inside where the fin goes please

Rays_240
10-10-2013, 02:26 PM
Im assuming your trying to make sure its real? here are the requested pics.

http://i282.photobucket.com/albums/kk265/l2aymond/CAM00395_zps801d8b18.jpg
http://i282.photobucket.com/albums/kk265/l2aymond/CAM00396_zps4e5413f9.jpg
http://i282.photobucket.com/albums/kk265/l2aymond/CAM00397_zps9c8f4fd9.jpg

PowerDrifter
10-10-2013, 04:50 PM
can you do these test for me? i just bought one claiming it was authentic and all they did was swap out the hologram in the back with a real one. unfortunately its harder to get a real one than a fake one now a days


Spotting A Fake HKS SSQV - A Pictorial Guide - ScoobyNet (http://bbs.scoobynet.com/scoobynet-general-1/928072-spotting-a-fake-hks-ssqv-a-pictorial-guide.html)

Rays_240
10-10-2013, 05:07 PM
I went through each thing short of taking the bov apart and this bov passes them all. Like said above the finish is coming off but I took some more pics pertaining to the things listed in that thread. Let me know if you need anything else...

Quality box
http://i282.photobucket.com/albums/kk265/l2aymond/CAM00398_zps8585ac99.jpg

Correct text placement
http://i282.photobucket.com/albums/kk265/l2aymond/CAM00399_zps1d62c98f.jpg

Proper tube length and nut size
http://i282.photobucket.com/albums/kk265/l2aymond/CAM00400_zps79546f51.jpg

No milling marks
http://i282.photobucket.com/albums/kk265/l2aymond/CAM00401_zpsb28d83af.jpg

PowerDrifter
10-10-2013, 05:23 PM
ok just one last thing. can you show me a pick of the flange. ur hand keeps covering it at the bottom. also u dont have to take a pic but see if you can see a gap where it says sequential blow off valve like in the tutorial and if there an "R" on the hks baged outside. and pm price shipped

mkhoid
10-10-2013, 05:24 PM
pm'd you


text me if you want to sell for the price i pm'd you for.

240 595 8150

Rays_240
10-10-2013, 07:23 PM
ok just one last thing. can you show me a pick of the flange. ur hand keeps covering it at the bottom. also u dont have to take a pic but see if you can see a gap where it says sequential blow off valve like in the tutorial and if there an "R" on the hks baged outside. and pm price shipped

The flange is still attached to the weld on flange. The c-clip is a bitch to get on and off. It has the stainless c-clip. There is no gap like your talking about because its all still together. There will only be a gap if its disassembled. Im not sure what you mean by "R"?

Also my plain cardboard box has the sticker with the lot number on it...

This thing is 100% real, ive proved it like 5 diff ways. I purchased it new off frsport. i hope you are serious about purchasing this. Ill do $85 shipped

OuTLaVvZ
10-10-2013, 07:47 PM
just wat im looking for..let me know if its not sold by tomorrow

Rays_240
10-14-2013, 10:13 PM
This is sold