View Full Version : NY Parting Out SR20de motor
Andy718
09-29-2013, 11:15 AM
Motor is pulled from a 2002 infiniti g20.
Mostly everything is intact still
Willing to ship out parts if you pay shipping, paypal ready.
Located in NY for local pick up.
Will not sell the entire motor.
http://i41.tinypic.com/23ibjp1.jpg
lucas240sx
09-29-2013, 12:51 PM
I need some valve shims
wanna measure them out for me?
I need 2.80mm and 3.20mm
Andy718
09-29-2013, 05:51 PM
Ok will do in the morning.
Anyone needs anything else?
lucas240sx
09-29-2013, 07:57 PM
If you can pull the tensioner bolt off the alt and send me a pic to check if it will work
Thanks
Andy718
09-30-2013, 11:21 AM
bump!!!!!!!
lucas240sx
09-30-2013, 01:18 PM
bump
Had a chance to check them out yet?
Andy718
09-30-2013, 10:59 PM
Where do I locate the valve shims?
Below the rockers, above the valve retainers. That will pretty much ruin the head fwiw as you'll have to reshim it if it's ever going to run again.
lucas240sx
10-01-2013, 07:53 AM
Remove the cams, pull the rockers
Each rocker has a guide and a flat shim
Measure the thickness of the falt shims in mm
I need 2.80mm and 3.20mm
Andy718
10-02-2013, 03:54 PM
bumppp.
Will sell motor as is for $400 with tranny onnly for queens new york local pickup.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.