FS: Blown Redtop SR Block, Tranny, T25

[DORIMON]

I got a really good deal from a local guy on a blown block/tranny/t25/coilpacks/starter/shifter set that I was planning on building but I ended up just replacing whatever bad parts I had, (valve cover, injectors, water pump, etc.) Now I'm just trying to get rid of what's left over. It needs a new fuel rail as well as injectors, oil pan, alternator, actuator, clutch, the turbo extension pipe is an HKS style one with a ghetto rigged AIV plug, flywheel needs to be resurfaced, the throttle cable bracket is a little bent, turbo spins freely, very minimal shaft play, valve cover has one coilpack screw broken off inside its screwhole other than that paint isn't too bad, and finally the compression reads 120, 120, 120, 0. Supposedly the 4th cylinder has a blown piston ring or valve seal and fouling the 4th spark plug heavily with oil. The tranny is in perfect condition. If interested in everything or for parts, let me know by replying here, pm, or emailing me at [email protected] I can provide pics of everything. This should be perfect for those planning on building up an SR. Pick-ups welcome, I might be able to deliver depending on driving distance. Thanks.

[DORIMON]

Looks like I decided to part out this SR. Let me know if any of you need anything.

[s14slider]

what about the tranny? How much? If you can, call me up at 770 536 2452 and let me know. Just ask for Brandon. Thanks

[DORIMON]

what about the tranny? How much? If you can, call me up at 770 536 2452 and let me know. Just ask for Brandon. ThanksFor the tranny, I'm asking $250 or best offer. I won't be able to ship it so the buyer will have to pick it up here in MD.

[gogeeta13]

how much for turbo/lines/elbow/o2 housing

basically everything that goes with turbo except for manifold!

[hellion240sx]

how much for the t25?

[jtt220]

I need one perfect piston and both cam shafts with all followers. Let me know! you can email if you'd like... [email protected]

[rdoggins]

how much for the HKS style extension?

[Enemigo]

how much for the coilpacks

Jose

[kazuo]

I need ALL of the washers & nuts for the valve cover, the upper oil pan & the thermostat housing & outlet

PM me, thanks

[Nismo240SX]

i need a cam angle sensor if you have it...

[Demik]

got my stuff in the mail already.. nice communication and fast shippin. great seller guys....... thanks f()()

[DORIMON]

Sorry, for the late response guys, I've been busy with a few drift events in my area. Right now I have a local buyer planning on getting the block with the turbo, manifolds, valve cover, throttle body, ps pump, alternator, and coilpacks. If he backs out of the deal, or decides he doesn't need any of those parts on the block, I will reply here in the nextr few days with what is back on sale. As of right now, I have the following for sale and will be updated in the next few days:

SR Parts FS:
-stock flywheel
-transmission
-transmission crossmember
-stock shifter
-stock shift knob
-stock engine mounts