Dragula's Already "Finished" 5.0 Swap

[Dragula]

So this story starts with my first car, a 1988 Mustang 5.0 which I bought in 2000 and drove every day through high school and college up until I bought a second car for winter duty.

http://farm3.staticflickr.com/2866/9879645754_8ca4d1b450_o.jpg (http://www.flickr.com/photos/[email protected]/9879645754/)
mimosa (http://www.flickr.com/photos/[email protected]/9879645754/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

http://farm4.staticflickr.com/3749/9879858956_dd42d24cbd_o.jpg (http://www.flickr.com/photos/[email protected]/9879858956/)
yellowstang (http://www.flickr.com/photos/[email protected]/9879858956/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

It just so happens that the second car was a 1988 Nissan 200sx which is what brought me here in the first place.
I bought the car for practically nothing because the car wouldn't move and the owner didn't know if the trans was dead or the clutch was smoked. It turned out that the clutch was absolutely destroyed and all friction material was gone from the clutch disk.
Easy swap and the car was back on the road.

So I ended up finding a bunch of body parts from a SE in a junkyard in the same color and picked them up. Front lip, sideskirt, rear mudflaps and SE steering wheel.

http://farm3.staticflickr.com/2821/9879885446_d6fe39e3ae_o.jpg (http://www.flickr.com/photos/[email protected]/9879885446/)
200sxmid (http://www.flickr.com/photos/[email protected]/9879885446/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

http://farm3.staticflickr.com/2879/9880015813_3d3bbb01f7_o.jpg (http://www.flickr.com/photos/[email protected]/9880015813/)
200sxfront (http://www.flickr.com/photos/[email protected]/9880015813/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

http://farm6.staticflickr.com/5522/9879902955_56007b4d9f_o.jpg (http://www.flickr.com/photos/[email protected]/9879902955/)
dash (http://www.flickr.com/photos/[email protected]/9879902955/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

And then a friend of mine wrecked a 240 and gave me the motor so I swapped that in.
Plain old KA24e.

http://farm3.staticflickr.com/2825/9879992263_abe7193d5f_o.jpg (http://www.flickr.com/photos/[email protected]/9879992263/)
200sxmotor (http://www.flickr.com/photos/[email protected]/9879992263/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

I sold the S12 a couple years later, which I regret because it was obnoxiously clean, it was just slow and the suspension sucked and I was a college student so I couldn't afford to dump money into it.

So fast forward to this spring. The mustang is starting to get rusty in the wrong places, the strut towers are rotted almost completely through. I don't want to get rid of my first but strut tower and frame rail rot is a bit more major than I want to deal with so I figure I'll do the next best thing and at least let the motor live on.

http://farm4.staticflickr.com/3683/9657279353_abe268433d_z.jpg

So out came the motor in the middle of a rainstorm at night (I told myself earlier in the week I'd have the motor out by that day, no matter what the weather.

http://farm6.staticflickr.com/5446/9867634576_768e66337f_o.jpg (http://www.flickr.com/photos/[email protected]/9867634576/)
IMG_1325 (http://www.flickr.com/photos/[email protected]/9867634576/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

http://farm9.staticflickr.com/8420/8809373706_88efc498b6_o.jpg (http://www.flickr.com/photos/[email protected]/8809373706/)
302 out (http://www.flickr.com/photos/[email protected]/8809373706/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

And I picked up a 1991 240sx shell from a friend who had the car sitting in his yard for a bit for $250.

The pick up...during another rainstorm.
http://farm8.staticflickr.com/7378/9660431538_5d7e6b4ae6_o.jpg (http://www.flickr.com/photos/[email protected]/9660431538/)
240pickup (http://www.flickr.com/photos/[email protected]/9660431538/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Day 1
http://farm6.staticflickr.com/5518/9073476372_761c83b2c5_o.jpg (http://www.flickr.com/photos/[email protected]/9073476372/)
240sx (http://www.flickr.com/photos/[email protected]/9073476372/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

The car was pretty rough and missing alot of things.

[Dragula]

So first things first. I take apart one car cause of rust and the first thing I get to fix on the new car....rust!

http://farm4.staticflickr.com/3794/9657200137_9d5a02eb63_z.jpg

Patch panel. Not very well secured. I wonder whats underneath...Pull out the vice grips and start pulling, blobular welds pop and what do we have?

Giant Hole! Awesome. The patch was just a piece of a passenger side of some other 240.
http://farm6.staticflickr.com/5343/9660431384_dd47ca77af_z.jpg

Patch
http://farm4.staticflickr.com/3811/9944443556_d885725270_b.jpg (http://www.flickr.com/photos/[email protected]/9944443556/)
oldpatch 240 (http://www.flickr.com/photos/[email protected]/9944443556/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Alot of cutting, grinding, cleaning, etc later and a few days of welding time and the hole is patched.

http://farm6.staticflickr.com/5485/9660431306_1d7b5cb859_z.jpg

Looks like someone replaced the framerail as well. Welds on that part look iffy but apparently they were done by a different person than the patch...We'll see how it holds i guess.

Passenger side wasn't nearly as bad but still needed some work.

http://farm6.staticflickr.com/5526/9660431142_9c56ce7a9c_z.jpg

So with that done, I went ahead and stitch welded the strut towers and frame rails inside the engine bay. Can kinda see some of the welds in the next few pics.

Some clearancing of the trans tunnel and time to drop the motor in.

http://farm6.staticflickr.com/5525/9867624714_6210f687dc_c.jpg (http://www.flickr.com/photos/[email protected]/9867624714/)
IMG_1385 (http://www.flickr.com/photos/[email protected]/9867624714/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Fits pretty nice.

Test fitting the intake manifold, had to cut the bracing and the hood still won't clear. The front of the manifold hit so even spacing the back didn't help much. New radiator, homemade mounts, etc.

http://farm6.staticflickr.com/5500/9867652426_a54358c315_c.jpg (http://www.flickr.com/photos/[email protected]/9867652426/)
IMG_1423 (http://www.flickr.com/photos/[email protected]/9867652426/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Got started on making an exhaust. I tried to see if a stock mustang h-pipe would fit at first but it hung about 3-4 inches below the framerails, not good. So I had to separate the h-pipe and cut about 4 inches from the downward section and weld it back together. It tucks up nice above the level of the framerails so no risk of smashing that now.

http://farm3.staticflickr.com/2829/9878855196_afe8d345d5_b.jpg (http://www.flickr.com/photos/[email protected]/9878855196/)
under car (http://www.flickr.com/photos/[email protected]/9878855196/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

I wanted to use as much stuff I had laying around as possible. I had an old BPM Twister II exhaust from a subaru sitting around so I decided to make the exhaust into single outlet. Ordered some 45* bends and a dual 2.5" to 3" collector and fit them up to the car.

Mid production
http://farm6.staticflickr.com/5534/9867656836_1c2d1f18d6_b.jpg (http://www.flickr.com/photos/[email protected]/9867656836/)
IMG_1417 (http://www.flickr.com/photos/[email protected]/9867656836/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Finished product
http://farm8.staticflickr.com/7366/9867655216_f5f1e93e7a_b.jpg (http://www.flickr.com/photos/[email protected]/9867655216/)
IMG_1420 (http://www.flickr.com/photos/[email protected]/9867655216/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

http://farm3.staticflickr.com/2822/9867647234_fa0c76326b_b.jpg (http://www.flickr.com/photos/[email protected]/9867647234/)
IMG_1419 (http://www.flickr.com/photos/[email protected]/9867647234/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Fits pretty nice. Car is filthy.
http://farm8.staticflickr.com/7367/9867640045_f0b8b28529_b.jpg (http://www.flickr.com/photos/[email protected]/9867640045/)
IMG_1421 (http://www.flickr.com/photos/[email protected]/9867640045/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

[dawagarage]

nice. vids or audio of it running?

[Dragula]

Random other stuff. Got some clear turn signals from Depo.

http://farm3.staticflickr.com/2875/9867631726_b3ba3f9315_b.jpg (http://www.flickr.com/photos/[email protected]/9867631726/)
IMG_1412 (http://www.flickr.com/photos/[email protected]/9867631726/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Had a driveshaft made by a local shop.

http://farm4.staticflickr.com/3752/9867726193_91554c5db0_b.jpg (http://www.flickr.com/photos/[email protected]/9867726193/)
IMG_1406 (http://www.flickr.com/photos/[email protected]/9867726193/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Got this massive front swaybar from Sikky to clear my baffled and widened oil pan. I had to cut some holes in the hood to clear the intake manifold and throttle body.

http://farm4.staticflickr.com/3756/9878934746_3848986567_b.jpg (http://www.flickr.com/photos/[email protected]/9878934746/)
swaybar (http://www.flickr.com/photos/[email protected]/9878934746/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Found a set of wheels and tires, Kosei Snipers, for sale for cheap, $150, installed some aerocatches since the car had no hood latch, and put a reverse scoop, cowl, whatever from a 85ish mustang over the holes I had to cut.

http://farm4.staticflickr.com/3676/9867670264_ce54cffd8b_b.jpg (http://www.flickr.com/photos/[email protected]/9867670264/)
IMG_1455 (http://www.flickr.com/photos/[email protected]/9867670264/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Did all the wiring but no pics of that. Who would want to see that anyways. Wiring hell.

Fired it up with minimal issues (car blew the ecu relay) and took it on its first drive for gas.

http://farm4.staticflickr.com/3774/9878935646_7dbc6d004f_b.jpg (http://www.flickr.com/photos/[email protected]/9878935646/)
gas station (http://www.flickr.com/photos/[email protected]/9878935646/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

http://farm6.staticflickr.com/5543/9867668294_938869ea19.jpg (http://www.flickr.com/photos/[email protected]/9867668294/)
IMG_1460 (http://www.flickr.com/photos/[email protected]/9867668294/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Here's a terrible video of the car pulling away and driving down the road. Friend tried to instagram video it but it failed and screwed it all up.

302 Nissan 240 the worst video ever made - YouTube (http://youtu.be/DCnBoDLOde0)

And no idea if this will work but here's a instagram vid on a friends page.

http://statigr.am/viewer.php#/detail/509509303990176150_31141489

[Dragula]

Had to take a quick break while I went down to H2Oi.

So I built the car in pretty short time but I neglected to source plenty of wheels and tires in the meantime for my first drift event. Had to make a mad rush to find some sets. I found a set of Work Euroline DH's nearby for reasonably cheap and picked those up.

http://farm3.staticflickr.com/2862/9876654945_44e6bcb687.jpg (http://www.flickr.com/photos/[email protected]/9876654945/)
eurolines (http://www.flickr.com/photos/[email protected]/9876654945/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

And borrowed some wheels from a friend and got some tires mounted on some mustang wheels I had (plus adapters)

The plan was to use the eurolines as fronts and drive-to-the-event rears and burn off the kosei sniper tires and the other wheels/tires.

Loaded up the car, 8 wheels with tires mounted and 2 loose 17" tires.

http://farm8.staticflickr.com/7345/9867663525_09d2b9d55f_b.jpg (http://www.flickr.com/photos/[email protected]/9867663525/)
IMG_1474 (http://www.flickr.com/photos/[email protected]/9867663525/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Drove the 1.5 hours out to Lime Rock for Lock City Drift - Beat the Heat event. The car made it out there with minimal issues, just a bit of a vibration at highway speed.

http://farm4.staticflickr.com/3720/9867769073_4240ee3a3b.jpg (http://www.flickr.com/photos/[email protected]/9867769073/)
IMG_1477 (http://www.flickr.com/photos/[email protected]/9867769073/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

http://farm6.staticflickr.com/5488/9867667104_7ce9f0f7d4_b.jpg (http://www.flickr.com/photos/[email protected]/9867667104/)
IMG_1483 (http://www.flickr.com/photos/[email protected]/9867667104/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

This was my absolute first drift event or even first time throwing the car around at all so I was expecting to suck pretty bad. All I wanted to do that day was work on individual corners and basics and then work on other things like connecting corners at later events.

So heres a quick video of one of the middle of the day runs.

http://vimeo.com/72791447

Car did decent. The previous owner even took it for a rip so I know the car has it in her. Some minor issues popped up, particularly heat.
Normally the car drives at a steady 207*F which is still ok for a cast iron block and head motor but after a few runs the temps would rise up to 230* so I had to park it for a bit. Later as the day got hotter, I'd have to park it after every run and let it cool, so that slowed down the day a bit. Helped me conserve tires at least...

Once I got the car home, I wanted to work on keeping it cooler and buttoning things up a bit better.
First things I did was bought a battery box and moved the battery to the trunk. This let me un-sandwich the air filter from between the hood and the battery so I could maybe get some cooler air. There was already a hole cut in the battery tray so I should be good for cool air there.

I also made some homemade cooling plates to cover up the gaping hole in front of the radiator and bought a fan shroud since my fans were just fastened straight to the radiator. I also cut the hole under the scoop as big as it would go to try to extract some heat.

Panels and intake
http://farm8.staticflickr.com/7343/9867674676_a63b41e1cf_b.jpg (http://www.flickr.com/photos/[email protected]/9867674676/)
IMG_1518 (http://www.flickr.com/photos/[email protected]/9867674676/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Bigger hood hole
http://farm6.staticflickr.com/5335/9867769693_2335bf01a5_b.jpg (http://www.flickr.com/photos/[email protected]/9867769693/)
IMG_1484 (http://www.flickr.com/photos/[email protected]/9867769693/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

The last 2 things I did were hook up the heater core so I could blast the heater if things started getting hot, and I also replaced the stock mustang 195* thermostat with a 180* piece. After all this, the car runs rock solid at about 189*-195*. So hopefully I should be all good for October 5th.

So now I've gotta work on getting it looking decent. I picked up a set of 180sx tails since I've always liked the way these look.

http://farm3.staticflickr.com/2828/9875965246_4b08207e7b_b.jpg (http://www.flickr.com/photos/[email protected]/9875965246/)
Untitled (http://www.flickr.com/photos/[email protected]/9875965246/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

And I'm working on getting some aero and maybe a 5 lug swap ready for next year.

[ultimateforce]

I have a soft spot for Windsors, so I approve. Ford firing orders sound better than Chevy ones. Deal with it LS1 havers.

[Dragula]

Crappy video from Lock City Drift Driftoberfest

This was only my 2nd event so I still suck.

Lock City DriftoberFest Nisstang - YouTube (http://youtu.be/bpy0q1YM8-Y)

And a couple random instagram videos
Instagram (http://instagram.com/p/fOes2XN3p4/)

Instagram (http://instagram.com/p/fOdsFIN3oC/#)

[souljaseth33]

Looks good! I love it down at Lime Rock, I ran my first event there earlier this year. Always a good turn out, awesome track, and cool area. Even better when you get the cars running the outer road course while your there!

[NordicMistBB6]

God i love this car... <3 cant wait to have mine running!

[Big Zee]

Great job!!!
I love this idea and that you managed to keep the hatch from super missle hippie status while building it.

Your sir! deserve a Kudos! :D
keep it up and I look forward to seeing more updates and vids :D

[Dragula]

Thanks guys. It still looks a little missile-ish since the car was a little beat up when I got it, but hopefully that gets fixed up when I pick up some aero this winter.

I'm debating on staying cheapish with AIT G-power, or going up to an Origin Stream Line or Stylish kit. My only problem is being afraid of destroying pricey aero and driving less aggressively as a result.

I really haven't heard much for reviews for the AIT stuff so I have no idea if it'll be absolutely terrible or not.

[Big Zee]

get a Chaser kit, cheap and wont hurt the heart so much when it breaks. However, it may have fitment issues

I like the look of the Origin kit though. my only real beef is that there is always a gap on the back bumper by the tail light garnish.

[TWest]

Nice build, love the fact that you kept the engine alive from the car you grew up with.

[Dragula]

get a Chaser kit, cheap and wont hurt the heart so much when it breaks. However, it may have fitment issues

I like the look of the Origin kit though. my only real beef is that there is always a gap on the back bumper by the tail light garnish.

I ordered the AIT kit and it arrives tuesday, haha. I guess I'll find out how the fitment is soon enough. On the bright side, I wont mind smashing it up so much.
I also picked up a new drivers door since the one on there is pretty dented and the paint is chipped from when a tree hit the car at the previous owners house. And I got some new fenders to replace the seriously messed up ones on there.

[NordicMistBB6]

Saw this car in person. Love it. Big ups to the owner! I look forward to seeing you at lime rock again.

Sent from my HTC One using Tapatalk 2

[Dragula]

So a few random updates.

The front fenders were beat from previous owner drifting and looked pretty bad.
The drivers side lip was pretty much torn out and worn to a sharp edge.

http://farm8.staticflickr.com/7405/10683702566_437439b3fa_o.jpg (http://www.flickr.com/photos/[email protected]/10683702566/)
D_fender bad (http://www.flickr.com/photos/[email protected]/10683702566/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

And the passenger side had a few dents and scrapes and was starting to tear through.

http://farm4.staticflickr.com/3697/10683701996_df1cbb1b94_o.jpg (http://www.flickr.com/photos/[email protected]/10683701996/)
P_Fender bad (http://www.flickr.com/photos/[email protected]/10683701996/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

And the drivers side door had some nice dents from when a tree fell and caught the side of the car a little bit.

http://farm3.staticflickr.com/2806/10683659025_b8e8b6e93d_o.jpg (http://www.flickr.com/photos/[email protected]/10683659025/)
D_door bad (http://www.flickr.com/photos/[email protected]/10683659025/) by Stang1282 (http://www.flickr.com/people/6382[email protected]/), on Flickr

So I kept an eye out and managed to find a junkyard parting a white 240 with good fenders and a good drivers door so I jumped on it.


Mid parts swap

http://farm4.staticflickr.com/3733/10683707394_d79a554038_o.jpg (http://www.flickr.com/photos/[email protected]/10683707394/)
no_door (http://www.flickr.com/photos/[email protected]/10683707394/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

And finished product. Excuse the terrible cell phone pic. It overexposed for some reason.

http://farm4.staticflickr.com/3775/10683901753_e33b247715_o.jpg (http://www.flickr.com/photos/[email protected]/10683901753/)
fixedish (http://www.flickr.com/photos/[email protected]/10683901753/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

The only unfortunate thing is, the panels were a sort of pearl white so I get to add yet another random shade of white to the car.



And then these showed up...

http://farm6.staticflickr.com/5548/10683707144_df49c52142_o.jpg (http://www.flickr.com/photos/[email protected]/10683707144/)
aero (http://www.flickr.com/photos/[email protected]/10683707144/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr


And the latest project. The trans I had in the car was in rough shape. It whined, ate driveshaft yokes (tailshaft bushing was worn), chattered, etc. I didn't dare drift in 3rd since it was so noisy but I was topping out 2nd most of the time at the track so I really need to be able to use 3rd for next year. So I picked this up and will be swapping it this weekend. The old trans is already out.

http://farm4.staticflickr.com/3701/10683701786_e1c457b140_o.jpg (http://www.flickr.com/photos/[email protected]/10683701786/)
trans (http://www.flickr.com/photos/[email protected]/10683701786/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Fresh rebuilt World Class t-5 out of an early 90s mustang (strongest version aside from a t-5z.

Thats it for now. I'm working on picking up a garage for my cars with a house attached.

[Fries]

Doing great things. Way to turn around such a ripped ass shell.

[Dragula]

Random update.
I replaced the transmission this weekend. Car feels alot better and the drivetrain is way less noisy.

I never took a pic of this pre installed but here's a quick shot of the skidplate on the car. Pretty beefy piece which just barely clears the pan. Definitely gives some extra confidence that I won't smash anything without trying hard at it.

http://farm3.staticflickr.com/2844/10845404515_87b472f030_o.jpg (http://www.flickr.com/photos/[email protected]/10845404515/)
skidplate (http://www.flickr.com/photos/[email protected]/10845404515/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

And I picked up a set of s13 turn signals for the aero.

http://farm4.staticflickr.com/3694/10845738323_d99218537d_o.jpg (http://www.flickr.com/photos/[email protected]/10845738323/)
signals (http://www.flickr.com/photos/[email protected]/10845738323/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

[Dragula]

Started test fitting parts. Threw the skirts on to see how much I need to work on them. They're tight and straining the corners in the front and rear of the skirts, but no cutting needed so far. Theres some high spots where the door rubs that I'm going to have to knock down or else theres no way paint will survive for more than a day. Otherwise, I'm happy with the way they look.

http://farm6.staticflickr.com/5547/10937736644_cb312ddb58_b.jpg (http://www.flickr.com/photos/[email protected]/10937736644/)
240_skirts (http://www.flickr.com/photos/[email protected]/10937736644/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

And then I threw the turn signals into the bumper to see how they'd look.

http://farm4.staticflickr.com/3763/10937591795_265b695a73_b.jpg (http://www.flickr.com/photos/[email protected]/10937591795/)
240_bumper (http://www.flickr.com/photos/[email protected]/10937591795/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

[Dragula]

Spraybombed the skirts with some duplicolor and threw them on. Not bad for rattlecan.

http://farm4.staticflickr.com/3691/11119327824_dd13eea9a1_b.jpg (http://www.flickr.com/photos/[email protected]/11119327824/)
nisstang_skirts_pass (http://www.flickr.com/photos/[email protected]/11119327824/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

http://farm6.staticflickr.com/5544/11119328574_57289c5dcc_b.jpg (http://www.flickr.com/photos/[email protected]/11119328574/)
nisstang_skirts_driver (http://www.flickr.com/photos/[email protected]/11119328574/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

[Black R]

Car sounds good.

In for updates.

[homeslicej2]

Did you get fender & door from an 89-90 shell? they were ivory white so a bit darker than the 91-94 color.

[Dragula]

Did you get fender & door from an 89-90 shell? they were ivory white so a bit darker than the 91-94 color.

The fenders, doors and hood are mismatched. The previous owner swapped the doors and hood from his other car I believe which are the slightly darker white. I bought new fenders and a drivers door from a junkyard. The new fenders and door are a darker white with some pearl in them.
The front bumper, rear bumper and chassis are a brighter white. And the new front and rear bumpers and skirts are duplicolor spraybombed with some clear coat as well. Plus at some point the hatch was painted with a roller or something which I need to fix when it gets warm enough to paint outside.

So yeah the car doesn't match in the least bit. I usually get a #50shadesofwhite from one friend whenever I put something up on Instagram.

[Dragula]

And since it was nice out today (40*), I got to test fitting the rear bumper which wasn't too bad. Just some minor sanding at the top corners.

http://farm4.staticflickr.com/3747/11163995915_6682fb346f_b.jpg (http://www.flickr.com/photos/[email protected]/11163995915/)
nisstang_bumper (http://www.flickr.com/photos/[email protected]/11163995915/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Now I've gotta clear out a larger area for my basement paint booth since this thing is huge.

[NordicMistBB6]

this is gonna look so awesome when its done. i cant wait til the 2 5.0s can roll together!! haha

[Dragula]

Quick update. Painted my bumper and threw it on today before the snow got too bad.

http://farm4.staticflickr.com/3759/11374570773_43fb3525a2_b.jpg (http://www.flickr.com/photos/[email protected]/11374570773/)
240bumper (http://www.flickr.com/photos/[email protected]/11374570773/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

[enderr]

wow amazing. that last picture is great.

[Dragula]

Thanks all, the front bumper is going to be a month or 2 away since I'm in the process of buying a house and I don't want to be pulling my front end apart right now with the car outside to test fit. I'm doing most of the prep work and imperfection filling now though so painting should happen quick when I have a chance.

That and I'm looking into getting some good aluminum heads to drop about 50 pounds off the front end of the car and give me a fair bit more power as well.

[Dragula]

And I just placed the order for a pair of Trick Flow Twisted Wedge 170 heads with 61cc combustion chambers. Should make for a good power increase and weight reduction. 25lbs each vs the stock cast iron heads at 50 lbs each.

They won't be going on for a little while though. I need to get some new stud mount rocker arms (right now I have pedestal mount 1.72 arms), headgaskets, pushrods, head bolts or studs...

[Dragula]

Had today off so I decided to do some test fitting to the front bumper. I think this is about as close as its going to get as far as closing up the hood gap unfortunately. So tomorrow I'll probably try getting the brackets and holes situated so I can paint up the bumper (its just in primer right now).

http://farm3.staticflickr.com/2815/11656230276_70e06458d1_b.jpg (http://www.flickr.com/photos/[email protected]/11656230276/)
nisstang_front_test (http://www.flickr.com/photos/[email protected]/11656230276/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

[corkscrew]

awesome dude. my buddy had a slammed s14 with a 302 also

[Reece]

I like how there isn't that gap between the bumper and fenders like their usually is, looks good. Love this build.


Posted from Zilvia.net App for Android

[Dragula]

Heads and new stud mount rocker arms arrived.

http://farm4.staticflickr.com/3668/11790074365_21bc4504b4_b.jpg (http://www.flickr.com/photos/[email protected]/11790074365/)
Trick flows (http://www.flickr.com/photos/[email protected]/11790074365/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Nice big valves.

http://farm3.staticflickr.com/2890/11790493864_ba924b8e8f_b.jpg (http://www.flickr.com/photos/[email protected]/11790493864/)
trick flow valves (http://www.flickr.com/photos/[email protected]/11790493864/) by Stang1282 (http://www.flickr.com/people/[email protected]/), on Flickr

Now to order the 5,000 other bits and pieces I need to install these.

[Oakville]

Looking good man. Why is there such a gap between bumper and hood?

[Dragula]

Looking good man. Why is there such a gap between bumper and hood?

No idea. Seems like it has always been that way even with the stock bumper. It had all of the supports when it was stock. I dont know if there was supposed to be foam under the bumper but there was none, so maybe that has something to do with it.

Unfortunately, there isn't much adjustment I can do without causing negative effects elsewhere so I'm just going to have to live with it.

I know I'm not the only one with this issue. Alot of 240s I see out there have sagging bumpers.

[Oakville]

No idea. Seems like it has always been that way even with the stock bumper. It had all of the supports when it was stock. I dont know if there was supposed to be foam under the bumper but there was none, so maybe that has something to do with it.

Unfortunately, there isn't much adjustment I can do without causing negative effects elsewhere so I'm just going to have to live with it.

I know I'm not the only one with this issue. Alot of 240s I see out there have sagging bumpers.
Its a nissan thing, my car had gaps of like almost half inch below the headlights. Had to rework all of the supports. Grille gap on R32s isn't as noticeable though since its open there...good luck fixing your issue brother.

[ElmStormer]

Looking good so far. I also have a 302 swapped s13!

[Dragula]

So I haven't updated in a while but not because nothing has been happening to the car.

https://farm6.staticflickr.com/5008/13939978346_4a5fa9dc10_c.jpg

Pulled everything off the motor in prep for the head install. It was a pretty brutal winter this year so I got a late start on working on this thing.

https://farm8.staticflickr.com/7374/13959902762_ec868d7844.jpg
And started bolting up all the shiny new parts. I cleaned up some of the old parts too so they wouldn't look quite so bad.

https://farm8.staticflickr.com/7295/13963084045_872a4114b7_c.jpg
And all back together.

I made up a set of simple exhaust hangers to keep the exhaust a bit more supported. Until now the whole midpipe was hanging from the headers and a single hanger held up the rear section.

https://farm8.staticflickr.com/7378/13959903061_7984496934_z.jpg

And in the meantime I did a 5 lug conversion...which I don't have many wheels for yet, so I threw the summer wheels from my STi on the front along with some PBM spacers.

https://farm8.staticflickr.com/7237/13959902761_ff2ea18273_c.jpg

[Dragula]

And then a friend of mine took some video while I drove it around a little bit. It got slightly louder.

xj7j8rlAuUQ

And this weekend I finally got around to putting the painted front bumper on the car.

https://farm3.staticflickr.com/2910/13959902922_17c865dd6b_c.jpg

And then some artsy shots were taken.

https://farm6.staticflickr.com/5225/13959902332_2b18d48e34_z.jpg

https://farm8.staticflickr.com/7366/13939979616_04c9426a3a_c.jpg

https://farm8.staticflickr.com/7120/13983055203_5c260f3205_c.jpg

And thats about all for now.

[Flicktitty]

Cool build, always been surprised there isn't more 5 liter swapped S-Chassis out there.

[808drft]

What headers are u running? I tried to mod my steering column for my 302 swap but the mac headers still didnt have enough clearance. Maybe bcuz I moved my rack forward.

[Dragula]

What headers are u running? I tried to mod my steering column for my 302 swap but the mac headers still didnt have enough clearance. Maybe bcuz I moved my rack forward.

I have a modded steering shaft and I'm running Ford Racing Performance Parts GT40p specific headers (even though my heads aren't gt40p heads)

The BBK headers I used to have I had to dent.

[dat925stunna]

Cool build, always been surprised there isn't more 5 liter swapped S-Chassis out there.
lol i have one in progress

and sick build props to you bro

[Dragula]

lol i have one in progress

and sick build props to you bro

Thanks. I'm trying to nail down the fueling with the new heads since I'm still running speed density. Right now its a huge surge of power at full throttle but kinda iffy at medium throttle.

Anyways, I threw the rear wheels on from my STi to match the fronts.

https://farm8.staticflickr.com/7387/14041185251_32854ae139_z.jpg

[Purestock240]

estimated hp?

[dat925stunna]

Thanks. I'm trying to nail down the fueling with the new heads since I'm still running speed density. Right now its a huge surge of power at full throttle but kinda iffy at medium throttle.

Anyways, I threw the rear wheels on from my STi to match the fronts.

https://farm8.staticflickr.com/7387/14041185251_32854ae139_z.jpg

why not convert to maf? i got a harness if ur interested?

[Dragula]

estimated hp?

No idea. I don't really want to throw out guesses.

why not convert to maf? i got a harness if ur interested?

I'm considering it. I'd just need to get a maf meter, ecu, injectors, harness and splice everything together. Maybe in the next month or 2.

[dat925stunna]

Lmk ill sell u the harness for $50+shipping its complete with a shitty soldering job on the maf connection but ill fix it so it looks good


Sent from my iPhone using Tapatalk

[Dragula]

I picked up a set of 18x9.5 +20 Work Cr Kai's and a Type X Wing.

https://farm6.staticflickr.com/5523/14138720778_409e41a1c5_c.jpg

https://farm3.staticflickr.com/2921/14322046801_88fa19ed69_c.jpg

https://farm3.staticflickr.com/2904/14138720589_8c495e36ce_c.jpg

And I did a MAF conversion and added some fresh 30lb injectors. The car has livened up alot.

I'm debating on getting the wheels powdercoated gold with alot of flake. I liked the way it looked with the prodrives on it.

[xcom90]

what hood scoob is that?? i like it. i have a vh45 in my s13 and need to do a hood scoop but dont want it looking like a muscle car.

[Dragula]

what hood scoob is that?? i like it. i have a vh45 in my s13 and need to do a hood scoop but dont want it looking like a muscle car.

Its from a 1985ish mustang gt.
http://www.1985mustanggt.com/index_files/image007.jpg

Orrrrrr....
http://captocapri101.smugmug.com/Cars/Capri-1/i-2QV8FZz/0/L/Resize%20of%20SS851603-L.jpg

You can find it on some 80s mercuri capris...but flipped around.

[91coupesr20det]

Whatever happened to this?

[Dragula]

Whatever happened to this?

Still going strong. And I can sorta drive now too.

http://youtu.be/ksVMJmEOHKY