SR20DET Engine Parts - CP Pistons, Eagle Rods, Radiator, ECU, Harness, etc..!

[Blues13]

So one of the wrist pins on the piston let go on my built S13 SR.. good times. I've just swapped in a new SR so I have parts from the old and new SR for sale.

Looking for mainly local pickup for buyers in the DMV/MD/lower PA area, but may be willing to ship smaller items. I'm located near Hagerstown, MD but go down to the DMV area sometimes. Open to best offers or trades.

S13 BLACKTOP SR20DET CP PISTONS and Eagle Rods (86.5 9:1) - $SOLD

SR20DET bare block ($50), crankshaft ($50) - or $80 together! **PICKUP ONLY for block and crankshaft**

S13 BLACKTOP SR20DET BARE HEAD - $30 The bare head off same block. The #3 squish area is slightly damaged, so may need to be reshaped - see images. Can include rockers, retainers, and lifters for $20 extra.

Other USED Parts in Good Condition:
Koyo COPPER CORE SR20DET Radiator - $35
Engine Leveler - SOLD
750lb Engine Stand - SOLD
KICS 5mm 4x114.3 Spacer - $20/Pair
370cc Sr20det Stock Injectors - $80 for 4, Fuel rail is SOLD
T25 Turbo straight off new swap - SOLD
exhaust manifold/elbow - $25
Complete S13 SR Wiring Harness - SOLD
Ignition Coilpacks - $80
SR ARP Head Studs - $SOLD
S13 Redtop MT ECU - $100
S13 SR Blacktop Valve cover - $75
S13 SR Intake Manifold - $35, IACV, bracket and Throttle body sold
APEXi 1.1mm 87mm bore used Headgasket - SOLD
S13 SR Crank Angle Sensor CAS - $80
S13 SR Timing Chain tensioner - $15
SR AC Compressor w/ Bracket - $35
Stock shifter - $5
SR oil pan - SOLD
Motor mounts L/R - $20/pair
oil pickup - $5
Charcoal canister - $5
Knock Sensor - SOLD
SR EGR valve - $15
SR Crank Pulley / Harmonic balancer - $30
SR Clutch Fan - $30


http://i4.photobucket.com/albums/y117/blues13/SR20DET%20PARTS%20for%20SALE/EngineBlock.jpg (http://s4.photobucket.com/user/blues13/media/SR20DET%20PARTS%20for%20SALE/EngineBlock.jpg.html)
http://i4.photobucket.com/albums/y117/blues13/SR20DET%20PARTS%20for%20SALE/SRHEAD.jpg (http://s4.photobucket.com/user/blues13/media/SR20DET%20PARTS%20for%20SALE/SRHEAD.jpg.html)
http://i4.photobucket.com/albums/y117/blues13/SR20DET%20PARTS%20for%20SALE/SRHEAD01.jpg (http://s4.photobucket.com/user/blues13/media/SR20DET%20PARTS%20for%20SALE/SRHEAD01.jpg.html)
http://i4.photobucket.com/albums/y117/blues13/SR20DET%20PARTS%20for%20SALE/KICSSpacer.jpg (http://s4.photobucket.com/user/blues13/media/SR20DET%20PARTS%20for%20SALE/KICSSpacer.jpg.html)
http://i4.photobucket.com/albums/y117/blues13/SR20DET%20PARTS%20for%20SALE/SR20DETPARTS02.jpg (http://s4.photobucket.com/user/blues13/media/SR20DET%20PARTS%20for%20SALE/SR20DETPARTS02.jpg.html)
http://i4.photobucket.com/albums/y117/blues13/SR20DET%20PARTS%20for%20SALE/SR20DETPARTS01.jpg (http://s4.photobucket.com/user/blues13/media/SR20DET%20PARTS%20for%20SALE/SR20DETPARTS01.jpg.html)
http://i4.photobucket.com/albums/y117/blues13/SR20DET%20PARTS%20for%20SALE/SR20ECU.jpg (http://s4.photobucket.com/user/blues13/media/SR20DET%20PARTS%20for%20SALE/SR20ECU.jpg.html)
http://i4.photobucket.com/albums/y117/blues13/SR20DET%20PARTS%20for%20SALE/Koyo02.jpg (http://s4.photobucket.com/user/blues13/media/SR20DET%20PARTS%20for%20SALE/Koyo02.jpg.html)

[DUBSTEP]

how much for the a.c bracket shipped to 90201?

[lucas240sx]

Will you sell the shims?
I need two 2.80mm and two 3.20mm

[se7en_]

I'll take the ARP head studs and how many km on the gasket?

[Blues13]

@DUBSTEP - AC bracket $30 shipped

@Lucas240sx - Valve shims? I'd have to check what sizes I have on hand, but I'd ideally like to sell it with the other rockers, retainers, and lifters. $25 for all that plus shipping.

@Se7en_ PM me with your zip code to figure out shipping costs. Headgasket / Studs were on my motor for about 5 years, roughly 25k miles.

[lucas240sx]

I would be ok with that...just as long as you have the shim sizes i need
Still cheaper for me than to buy new

[srcoupe89]

interested in the turbo. PM'ed you.

[Blues13]

@Lucas240sx - OK, I'll check what sizes I have tonight

@srcoupe89 - PM'd you

[lucas240sx]

Turbo looks clean

Willng to sell fuel rail and regulator seperate from inj?

[Blues13]

Turbo looks clean

Willng to sell fuel rail and regulator seperate from inj?

Turbo is pending sale..

I'd like to sell injectors/rail together, but if not $35 for fuel rail itself or $100 for both rail + injectors.

Shipping would be extra.

[Blues13]

Turbo is sold.. manifold and elbow still available for cheap.

Leveler, engine stand, throttle body, oil pan pending sale..

[Blues13]

Leveler and engine stand sold! Fuel rail pending sale..

[Blues13]

Updated list and pricing.. Thanks to the buyers so far!

[Blues13]

Updated listing.. Pistons, rods, head studs, and headgasket sold!

Bare block and crank available for local pickup at a steal!

[Krooked]

Where are you located, im interested in bare block and crank

[Blues13]

Where are you located, im interested in bare block and crank

Hagerstown, MD..

Let me know ASAP.. I'll be heading out of the country next week, so will start packing things up later this week.

[Blues13]

Harness sold! Coilpacks still available!

This will be the last week for the larger items.. lmk asap!

[b0rdin4life]

I'm local and interested in the a/c compressor and bracket. Can you PM me your number?

[Blues13]

I'm local and interested in the a/c compressor and bracket. Can you PM me your number?

PM'd you..