Rear Suspension Question

[s13conv]

What do you I need to keep on the rear so that it can still be towed?

I have a 91 that I would like to pull parts from so that I can put poly bushings in for my other 240.

Thanks.

[AutoRnD]

you can do every mod... they toe from the hooks.... but.... alwats ask for a flat bed

[the head]

if you are talking about stripping a car you need somthing to hold the spindles in place and somthing to hold the car off the ground if you are going to take the struts and springs some sections of exaust pipe work well for this job

[s13conv]

Yes. I'm talking about stripping it. I plan to leave the shocks and springs. I've already pulled the rear and axles. Can I take the rear toe rods and the rear lower control arms too? The front has a broken tie rod so I plan on leaving everything except the T/C rods.

Thanks

[Chernobyl]

if you plan to tow with the rear wheels on the ground, you need all of the suspension links in place

[s13conv]

Could they maybe put a dolly on the front wheels and tow it out that way? Or maybe I could just take the rear toe rods off? :-/

[Chernobyl]

if you take the toe rods off, the wheels wont sit on the ground straight

[s13conv]

:bash:
I guess I'll have to take the pieces from the parts car, put the bushings in and then swap them with the other one.