chris952jz
09-14-2013, 11:01 AM
Name: Chris
Location: SOMD, Willing to meet within a hour to hour and a half drive if needed
Means of contact: PM, or shoot me a text @4439758566
Price: $4500! NEED GONE ASAP
Description: Up for sale now is my project car. Ive spent countless hours putting the thing together. It started as a bare shell (no gas tank, no suspension or brakes, no drivetrain, and no interior at all) and as it sits its a perfect running and driving car. Most people with RB's have cooling problems and I have made sure this one wont have any it runs colder than my buddies whos had issues with cooling since day one on his. The body has somwhere in the 19x,xxx range but the rears been swapped out with a low mileage one when I welded it. The motor and trans has around 60k on them and the spec stage 3 in it has 5k miles since I installed it. Yes there is rust holes in the rear quarters around the bottom. The plasti dip will be finished I just havent had the spare time yet to do it. MBC is set to 11 psi and it drive great at that level. Ive sunk over 10k into this shell in doing everything with the swap 100% correct.
Problems with it i guess i could say
1. the drivers window amp is missing so the drivers power window control doesnt work. (ive just ran two wires out of the pins and used a drill battery to power the motor, have been trying to get one local and will have one installed for buyer)
2. There is no cover plate over the trans tunnel for the shifter which is what the towel in the attached pics is for, will have one for a buyer as well
3. its using a dohc throttle cable which doesnt mate to the rb bracket, I am getting a sohc one cine my buddy is doing a sr ans has a single cam one so we will just swap cables
4. right rear tire goes flat if not driven for a couple days, will be repaired for buyer as well
5. Whatever interior pieces that are not in the car are in my shed and I will put all of them back in I just never worried about it myself
6. The front bumper will be repaired before being plastidipped unless buyer states otherwise (roof has been sprayed black and bumper has had a layer of bondo applied, should be done and dipped by mid next week)
Im not trying to sell it because it has issues. none of the issues affect its driveability at all. I am selling for financial reasons and I dont need the car since its not a daily. Again price is 6k obo. NEED GONE ASAP
Pictures:
http://i639.photobucket.com/albums/uu119/chris95gst/IMG_0548_zps1c9c4c2a.jpg (http://s639.photobucket.com/user/chris95gst/media/IMG_0548_zps1c9c4c2a.jpg.html)
http://i639.photobucket.com/albums/uu119/chris95gst/IMG_0547_zpsad263d0c.jpg (http://s639.photobucket.com/user/chris95gst/media/IMG_0547_zpsad263d0c.jpg.html)
http://i639.photobucket.com/albums/uu119/chris95gst/IMG_0546_zpseceaf6f9.jpg (http://s639.photobucket.com/user/chris95gst/media/IMG_0546_zpseceaf6f9.jpg.html)
http://i639.photobucket.com/albums/uu119/chris95gst/IMG_0545_zpsbd3aec79.jpg (http://s639.photobucket.com/user/chris95gst/media/IMG_0545_zpsbd3aec79.jpg.html)
Location: SOMD, Willing to meet within a hour to hour and a half drive if needed
Means of contact: PM, or shoot me a text @4439758566
Price: $4500! NEED GONE ASAP
Description: Up for sale now is my project car. Ive spent countless hours putting the thing together. It started as a bare shell (no gas tank, no suspension or brakes, no drivetrain, and no interior at all) and as it sits its a perfect running and driving car. Most people with RB's have cooling problems and I have made sure this one wont have any it runs colder than my buddies whos had issues with cooling since day one on his. The body has somwhere in the 19x,xxx range but the rears been swapped out with a low mileage one when I welded it. The motor and trans has around 60k on them and the spec stage 3 in it has 5k miles since I installed it. Yes there is rust holes in the rear quarters around the bottom. The plasti dip will be finished I just havent had the spare time yet to do it. MBC is set to 11 psi and it drive great at that level. Ive sunk over 10k into this shell in doing everything with the swap 100% correct.
Problems with it i guess i could say
1. the drivers window amp is missing so the drivers power window control doesnt work. (ive just ran two wires out of the pins and used a drill battery to power the motor, have been trying to get one local and will have one installed for buyer)
2. There is no cover plate over the trans tunnel for the shifter which is what the towel in the attached pics is for, will have one for a buyer as well
3. its using a dohc throttle cable which doesnt mate to the rb bracket, I am getting a sohc one cine my buddy is doing a sr ans has a single cam one so we will just swap cables
4. right rear tire goes flat if not driven for a couple days, will be repaired for buyer as well
5. Whatever interior pieces that are not in the car are in my shed and I will put all of them back in I just never worried about it myself
6. The front bumper will be repaired before being plastidipped unless buyer states otherwise (roof has been sprayed black and bumper has had a layer of bondo applied, should be done and dipped by mid next week)
Im not trying to sell it because it has issues. none of the issues affect its driveability at all. I am selling for financial reasons and I dont need the car since its not a daily. Again price is 6k obo. NEED GONE ASAP
Pictures:
http://i639.photobucket.com/albums/uu119/chris95gst/IMG_0548_zps1c9c4c2a.jpg (http://s639.photobucket.com/user/chris95gst/media/IMG_0548_zps1c9c4c2a.jpg.html)
http://i639.photobucket.com/albums/uu119/chris95gst/IMG_0547_zpsad263d0c.jpg (http://s639.photobucket.com/user/chris95gst/media/IMG_0547_zpsad263d0c.jpg.html)
http://i639.photobucket.com/albums/uu119/chris95gst/IMG_0546_zpseceaf6f9.jpg (http://s639.photobucket.com/user/chris95gst/media/IMG_0546_zpseceaf6f9.jpg.html)
http://i639.photobucket.com/albums/uu119/chris95gst/IMG_0545_zpsbd3aec79.jpg (http://s639.photobucket.com/user/chris95gst/media/IMG_0545_zpsbd3aec79.jpg.html)