my s14kouki sr20vet

[rbs14kouki]

Sup guys ! My name is P-O (pierre-olivier) , i'm from Montreal , Canada


my built thread info will be on the second post


you may know me from my old car (rb26dett s14 kouki)
RBS14 - YouTube (http://www.youtube.com/watch?v=NsFarFXR2oY)

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/560427_10151477413859616_1980012520_n.jpg


i was doing drift event here and there , and was getting more and more confortable with it ...

it was now time to make a race car out of my little street baby !
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/167703_10150179595739616_822985_n.jpg

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-prn2/167311_10150179955724616_7521284_n.jpg

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/180044_10150184155899616_1963754_n.jpg

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/167502_10150181782804616_3291054_n.jpg

https://sphotos-a-ord.xx.fbcdn.net/hphotos-prn2/166638_10150182264354616_7001973_n.jpg

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash2/184012_10150190299599616_1400992_n.jpg



the chassis work was all done !!! now was time to up-grade my stock twin turbo for a single
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash2/183428_10150193993099616_5111469_n.jpg

never mind my friend :P
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/183074_10150193993574616_7014281_n.jpg


little compression test before buying all my stuff ! compression is low -_-
déjÃ* vue !!!!!

the first year i had my rb in it the engine seized (that was after a rebuilt / full forged engine)

thinking its a head gasket , i lift the head up and this is what i found ! all 6 cylinders were the same
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/184676_10150194961399616_1122975_n.jpg


this was my second forge rb26 ! since i wanted to drift in dmcc and be reliable , i parted out all my rb swap to finance a ls1 swap


out with the old
https://sphotos-b-ord.xx.fbcdn.net/hphotos-prn2/183283_10150195641774616_3487890_n.jpg


in with the new
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc3/200300_10150247169294616_3081628_n.jpg

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/198100_10150248024019616_1363804_n.jpg

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/200696_10150248142664616_5434054_n.jpg



decided to refresh the ls1 before swaping it in
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc1/197375_10150249169829616_686841_n.jpg

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash2/197863_10150249170189616_2782853_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/206284_10150260226959616_6707984_n.jpg

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash2/216574_10150263159339616_4316353_n.jpg



with all the sikky part list
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash2/205126_10150263572049616_5194114_n.jpg



engine and g-force ready to go Inside the engine bay
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/250408_10150322730734616_6317913_n.jpg



s14 with the ls1 Inside her
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc3/298985_10150432973034616_1381996_n.jpg


chassi work was needed to fit the transmission
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/320758_10150451602649616_1160392510_n.jpg

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc1/319108_10150482644989616_1509075275_n.jpg

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/296777_10150497892214616_1569980478_n.jpg





i was at around 4k$ away to start the car !!!

26 year old and i was still living at my dads place ... with my girl for 3 years allready

it was now time to buy a house ... so i decided to part-out the complet car to get money for my down payment



first thing that was sold was the transmission set-up ... with-in 3 days it was online it got sold localy
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/424441_10150778502939616_1587202744_n.jpg


next was the chassi (this was the hardess thing i had to let go ... it was my first s-chassis and the cleaness)
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/179146_10151282452454616_644991517_n.jpg

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc3/304581_10151337001079616_1190133899_n.jpg



then a couple month later the engine was sold
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/227563_10151476757424616_1685152754_n.jpg





i had enough money for my cash down on the house

time to start the construction
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash2/521354_10151760421979616_1644466200_n.jpg

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/72678_10151772216689616_983926303_n.jpg

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/150438_10151815892909616_232938895_n.jpg



little tour of the house once all finish !
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/942974_4881762244850_240603091_n.jpg

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc3/971263_10151943436829616_609754371_n.jpg

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/969437_10151975813794616_100775070_n.jpg

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/983892_10151975813894616_1671150707_n.jpg

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/7481_10151975813974616_1333928816_n.jpg

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc1/400420_10151975814054616_996930339_n.jpg






now that my house was done ... i was missing driving my s14 , got abit of money back and made a move on a car ...

found this s14 kouki 1997 from detroit on here ... it had a rod Knock on a s14 sr20det , new precision 4828 , ame ems2 , 740cc enjectors , bc head , j30 brake , new froint lip fron nissan dealer .... for 4k$

made a cash down via paypal and drove with my Buddy to go get the car
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/565051_10151501995269616_635136524_n.jpg

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/407977_10151522261584616_276705129_n.jpg

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash4/407584_10151522188414616_829633600_n.jpg



i took the engine out to fix the problem ... at the same time my Buddy puts for sale a stock s14 sr blcok with a p11 head attach to it for 800$

i bought that shit in a heart beat

used this stock block for the rebuilt of my kocking sr (i changed the rings , honed the block) and the nocking sr for my ve (it was needing a crank and a bore)

at the machine shop (top det built , bottom ve built)
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn2/182514_10151546625354616_885322055_n.jpg

https://scontent-a-ord.xx.fbcdn.net/hphotos-ash3/556853_10151586056114616_1794920187_n.jpg



i had a brand new s14 sr for sale ... and my bro took it for is zenki he had bought
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/537204_10151645377449616_1711679901_n.jpg


time for the built thread to start !!!!

[Whitesil80315]

This turned out to be a sad story.....dislike!

[rbs14kouki]

here for my built info

head:
p11 head
p11 cams for the moment (but im looking for a set of p12)
p12 valve cover
brain crower cam gears
supertech 123lbs dvs
stock valve for now
mazworx intake newest version
mazworx hallsensor kit
mazworx vvl conversion kit
mazworx fuel rail
sr20vet head gasket



bottom end:
s14 block (decked and O-ring)
cp sr20ve pistons 86.5mm 9.0:1
manley H-beam rods
det crank
acl race bearing
new timing chaine kit
new sr20ve oïl pump
new s14 sr water pump
moroso oïl pan
taarks oïl filter relocation kit
taarks power steering relocation kit
codyace Quest alt kit
Doc race sr20ve manifold with v-band flange and mvr waste gate flange (i provided a sr20ve flange to them ... flange from taarks)
new seals everywhere



Drivetrain:
Os giken TS2BD twin plate
cd009 z33 transmission
collins or mazworx adaptor plate (dont know yet)
most likely will have a welded 4:10 gear or a 1.5way carbonetics with 4:10 gear



Cooling:
c&r custom rad
an fitting welded for rad hose
swirl pot custom made
oïl cooler and power steering cooler



hot side:
precision 5858 ar.63 v-band housing
precision 46mm wastegate
custom down pipe



fuel:
aeromotive stealt 340lph (single or dual in-tank ... im not sure yet)
id1000 injector



electronic:
AEM ems2 with custom wiring
AEM boost controler
aim cluster will be needed (i dont want 6 or 7 gauges)



exterior:
i still have my D-max type3 body kit
looking for bn sport front and rear fenders
that about it for now

since im going over fenders my front end is all for sale localy here in montreal , canada ...



Brake: (looking for a deal for the moment)
ill be looking for a evo x front brake set-up ... my Buddy works in a shop that preps rally evo's and the stock brake a too big for those cars from what i understand ... so ill pick a set as soon as i have abit more money aside !

rear im not sure yet ... z32 most likely but i think evo rear with z32 rotor works with spacers so ill need to read more in to this



suspension: (nothing purshase yet)
fortune auto 500 with swift spring upgrade will be my chose of coilovers
gktech suspension arm or spl
pbm front knuckle



wheels:
nothing yet



here are a couple pictures :

when i first got the head
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/189662_10151544715809616_2084813291_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/182566_10151546625479616_1935390690_n.jpg

https://sphotos-b-ord.xx.fbcdn.net/hphotos-ash3/9669_10151573881759616_431617541_n.jpg




mazworx shipement that came in at the same time as my Buddy sr24vet

this is Dave Briggs sr24vet formula D engine
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/46862_10151686109179616_2128816477_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc3/425989_10151734669189616_340046189_n.jpg



now with my parts
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/77094_10151577884094616_914992483_n.jpg

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/312805_10151577884184616_903835246_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-frc1/484169_10151577884239616_916218494_n.jpg

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-prn1/403495_10151577884314616_1547617330_n.jpg

http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-11.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-11.jpg.html)



o-ring block with pistons in it
http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-8.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-8.jpg.html)

http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-9.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-9.jpg.html)



Taarks oïl plate
http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-10.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-10.jpg.html)



head on the engine
http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-12.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-12.jpg.html)



with the p12 valve cover
http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-14.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-14.jpg.html)



now with the mazworx vvl relocation kit
http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-13.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-13.jpg.html)

http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-16.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-16.jpg.html)

i didnt like where mazworx was relocating the solenoids ... so i did custom hoses and relocated it Under the intake
http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-15.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-15.jpg.html)

http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-17.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-17.jpg.html)



this is when i brought my engine back home next to my s14
http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-18.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-18.jpg.html)



with taarks power steering relocation bracket
http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-6-1.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-6-1.jpg.html)

http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-20.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-20.jpg.html)


and this is my custom swirl pot that was inspired by Under Suzuki timeattack s15

under Suzuki:
https://sphotos-b-ord.xx.fbcdn.net/hphotos-prn2/1185472_10152190069979616_922432697_n.jpg

mine:
http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-22.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-22.jpg.html)

http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-23.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-23.jpg.html)

http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-24.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-24.jpg.html)




now im waiting for my doc race manifold to be shiped back to me ... after that its going to be turbo time ...

[rbs14kouki]

Fr Sport was realy helpfull with my problem ... they gave me the mesurement from the alt pulley spacer that i lost in the process of fixing the power steering pulley


those pics are from my engine tech thread : http://zilvia.net/f/editpost.php?do=updatepost&postid=5379077

ok here is the deal ... i bought a pulley set from fr-sport ... it came with 4 pulley Inside . (water pump , power steering , alt , ????)

http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-21.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-21.jpg.html)


when i instaled the power steering on the engine nothing was lining-up


http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-6-1.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-6-1.jpg.html)


i figure out the problem ... it was the right size compare to the stock one but was machined like a ka24de pulley :wtf: megan racing

here is a picture to show how it was machined
http://farm9.staticflickr.com/8462/8027464158_6befbff726_b.jpg



if i flip the pulley (to make it fit for the sr configuration ), with how it was machined i couldnt bolt it . the shaft of the power steering pump wasnt long enough


so i machined down the exterior face of the pulley to have enough thread stiking out ... when i bolted the pulley for the first time , it wasnt seating right .... took my stock sr pulley and mesured the Inside spacer that was built-in the stock pulley (5mm)

from how my pulley was made i only had to do a 4mm spacer

now it perfect ...


http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-19.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-19.jpg.html)

http://i202.photobucket.com/albums/aa74/rbs14kouki/Sr20vet%20built/image-20.jpg (http://s202.photobucket.com/user/rbs14kouki/media/Sr20vet%20built/image-20.jpg.html)

[rbs14kouki]

the transmission is in need of a rebuilt ... my Buddy gave it to me

it's from is 450whp z33 (second gear wasnt going in past 3500rpm , the rest was ok)


since i dont have a transmission for my set-up and was going to go with a z32 .... i decided to rebuilt this one and run a 6 speed on the ve :P


https://scontent-a-ord.xx.fbcdn.net/hphotos-ash3/529421_10152175333854616_122616925_n.jpg

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/1238353_10152175334114616_916327661_n.jpg



took everything appart to check whats wrong with the second gear ...
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc1/998790_10152164809079616_1530749042_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/523886_10152175334549616_1929492646_n.jpg

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/1234353_10152175334834616_1932429862_n.jpg



i though i only had to change the second gear and baulk ring ... but since im all ready there ... 3 and 4 would need a change too . in those pics you clearly see the syncro on the second gear side they are all shape on a diagonal ( / ) and not like the should be like an *Arrow*(­­­­ ^ )

at the local dealer ship here in canada , i have for 1200$ of parts to buy ... i looked around on the net and 550 + shiping from the usa to my house !!!

not to bad for a free transmission . i could try to just change the second gear but i dont feel like doing this again cause its a pita !!!!!!

[Whitesil80315]

Much better...Dudes got Arab money!

[Pinggg]

Damn, this is gonna be killer.

[rbs14kouki]

Just got a word from DocRace ! My mani is on its way

:P super pumped right now !