DatSlidewayz
09-11-2013, 05:03 PM
whats up zilvia,
Name: Kamil
Location: somerset county, NJ
Car: 1989 240sx Coupe
Price: Best Offer
Trade: Running, driving something.
Im trying to get a feeler out, to sell or trade, for my 1989 240 coupe drift build. I started it about a year ago, and put about $12,000 into it thus far. I still need a bunch of stuff to get it going and am thinking about cashing out whatever i can get, and put it towards a nice new daily/weekend track car. Im paying for a garage and thats killing my budget for the car. The car is NOT complete. Im asking a lot ik, but it is what it is. If u dnt like the price, my bad, i want to make back at least 50%. No rush to sell, i still may store it away and finish the build in a few years after i finish school & pay off a reliable daily.
--- I HAVE RECEIPTS FOR 95% OF THE PARTS---
What it needs:
Brake hard lines
Brake MS / BB
hydraulic hand brake/hand brake cables
Wiring
Intake pipe / filter
exhaust gaskets (I do have turbo inlet/outlet gaskets)
cage
seat rails
shifter
shift knob
EFI pump (for the sugre tank)
1 silvia head light
silvia headlight brackets (optional i suppose)
battery & cables
gauges (i have stock cluster)
and prob a boat load of stuff im forgetting ill edit when i remember.
--- Motor is not in, but all suspension is in, i may drop the motor some time soon tho---
what I got:
Chassis/Suspension/brakes----
240sx coupe shell, 200k miles, alot of rust repair, still needs some tlc imo.
Stich welded bay, done by a welder from Northeast Great Dane. 135 amp Mig, no gas. could look pretier but not bad.
Fortune Auto 510 coil overs
PBM max steering angle kit, welded on by Hardcore Welding (08844)
PBM eccentric steeringrack bushings
Tien Inner/outer tie rods (tien spacer)
new steering rack boots
Battle version Tension rods
battle version Toe link
Megan racing Forward link
Isis Rear upper control arm
2X PBM FLCA brace kit (not welded in, also have OEM New FLCA, and the used factory FLCA)
Ichiba 5 lug swap
billet motor mounts & trans mount (made in Canada, forgot company name)
Solid subframe bushings, name brand, forgot it tho, installed, with collars lifting the frame.
300zx calipers
OE clutch MS
OE clutch slave cylinder
Ebay pads/rotors
circuit sport brake lines
4x 5x100 wheels
4x 5x114 wheels
Aeromotive Stealth A1000 15 gallon fuel cell, with brace welded in trunk, to frame rails
ebay surge tank
10 feet of fuel line, misc An fittings (about 5, need a few more to piece the whole setup depending on EFI pump)
Complete Silvia body kit from japan yahoo auctions (bought from ozone park 240 guy) Fiber glass 50mm fenders, 50mm over fenders, side skirts, front & rear bumpers, plow type.
2X recaro racing seats from a Euro Type R accord, Drivers has adjustable lumbar support pump & adjustable leg support
battery box
Real silvia hood
1x silvia projector headlight
new rear trunk lid
Nissan S13 LSD, in pumpkin, stock axles.
Engine----
red top sr20det, 5 speed trans
Built by local guy in Central jersey, if anyone knows about this motor let me know!!!
tuned at 400hp, Dont know the block internals but i do know head has BC retainers & springs, rocker arm stoppers,
New water pump
all lightweight pullies
Garret GT2871r .83
Isis Exhaust manifold
aftermarket throttle cable pully
RC 550 cc injectors
OBX top feed fuel rail
Tomei FPR
wraped manifold
Isis radiator with silicione hoses
ebay electric fan
Greddy FMIC with Greddy piping
HKS sequential BOV
Ikeya Formula sequential shifter (for an LS type 5 speed trans, needs base milled to fit sr20 trans)
harness from a RHD silvia
Switch panel with relays & fuses from 9k racing
Summit racing race harness mini fuse box w wires
Solenoid for oil pressure
Apexi Power FC with commander
Apexi Boost controller
3" full exhaust (ebay screamer pipe, downpipe)
1 piece aluminum driveshaft, weighted & balanced
+To make this buy a little more appetizing, coz i am asking for a lot, if someone gives me a solid offer for EVERYTHING, ill throw in a 2013, flat black Snap On tool box, in perfect shape. i believe its 5 drawer. Retails for just over $2000.
+ ill throw in 2 gallons of a Blue Metallic Imron paint. costs $300 a gallon, & the activator for it, $150. Pics below
Ill list more when i remember & go through receipts.
http://farm3.staticflickr.com/2864/9725298397_cf2d37cf81_c.jpg
http://farm6.staticflickr.com/5509/9725273199_a983bcf149.jpg
http://farm4.staticflickr.com/3778/9728527328_c5c9c8f7db_c.jpg
http://farm3.staticflickr.com/2826/9725273279_d629a87ce2.jpg
http://farm9.staticflickr.com/8346/8230512393_edbd961133_z.jpg[/url]
http://farm8.staticflickr.com/7296/9728501850_734e3bc6a2.jpg
http://farm6.staticflickr.com/5516/9728501996_8fea5c6c86.jpg[/url]
http://farm3.staticflickr.com/2882/9725273615_97baa327a9.jpg[/url]
http://farm4.staticflickr.com/3737/9728501918_915953b3ef.jpg[/url]
http://farm4.staticflickr.com/3673/9725298365_785860b042_c.jpg[/url]
http://farm8.staticflickr.com/7438/9728527292_212bfeac90_c.jpg[/url]
http://farm9.staticflickr.com/8097/8538226298_aa3c5c3b3c.jpg[/url]
Name: Kamil
Location: somerset county, NJ
Car: 1989 240sx Coupe
Price: Best Offer
Trade: Running, driving something.
Im trying to get a feeler out, to sell or trade, for my 1989 240 coupe drift build. I started it about a year ago, and put about $12,000 into it thus far. I still need a bunch of stuff to get it going and am thinking about cashing out whatever i can get, and put it towards a nice new daily/weekend track car. Im paying for a garage and thats killing my budget for the car. The car is NOT complete. Im asking a lot ik, but it is what it is. If u dnt like the price, my bad, i want to make back at least 50%. No rush to sell, i still may store it away and finish the build in a few years after i finish school & pay off a reliable daily.
--- I HAVE RECEIPTS FOR 95% OF THE PARTS---
What it needs:
Brake hard lines
Brake MS / BB
hydraulic hand brake/hand brake cables
Wiring
Intake pipe / filter
exhaust gaskets (I do have turbo inlet/outlet gaskets)
cage
seat rails
shifter
shift knob
EFI pump (for the sugre tank)
1 silvia head light
silvia headlight brackets (optional i suppose)
battery & cables
gauges (i have stock cluster)
and prob a boat load of stuff im forgetting ill edit when i remember.
--- Motor is not in, but all suspension is in, i may drop the motor some time soon tho---
what I got:
Chassis/Suspension/brakes----
240sx coupe shell, 200k miles, alot of rust repair, still needs some tlc imo.
Stich welded bay, done by a welder from Northeast Great Dane. 135 amp Mig, no gas. could look pretier but not bad.
Fortune Auto 510 coil overs
PBM max steering angle kit, welded on by Hardcore Welding (08844)
PBM eccentric steeringrack bushings
Tien Inner/outer tie rods (tien spacer)
new steering rack boots
Battle version Tension rods
battle version Toe link
Megan racing Forward link
Isis Rear upper control arm
2X PBM FLCA brace kit (not welded in, also have OEM New FLCA, and the used factory FLCA)
Ichiba 5 lug swap
billet motor mounts & trans mount (made in Canada, forgot company name)
Solid subframe bushings, name brand, forgot it tho, installed, with collars lifting the frame.
300zx calipers
OE clutch MS
OE clutch slave cylinder
Ebay pads/rotors
circuit sport brake lines
4x 5x100 wheels
4x 5x114 wheels
Aeromotive Stealth A1000 15 gallon fuel cell, with brace welded in trunk, to frame rails
ebay surge tank
10 feet of fuel line, misc An fittings (about 5, need a few more to piece the whole setup depending on EFI pump)
Complete Silvia body kit from japan yahoo auctions (bought from ozone park 240 guy) Fiber glass 50mm fenders, 50mm over fenders, side skirts, front & rear bumpers, plow type.
2X recaro racing seats from a Euro Type R accord, Drivers has adjustable lumbar support pump & adjustable leg support
battery box
Real silvia hood
1x silvia projector headlight
new rear trunk lid
Nissan S13 LSD, in pumpkin, stock axles.
Engine----
red top sr20det, 5 speed trans
Built by local guy in Central jersey, if anyone knows about this motor let me know!!!
tuned at 400hp, Dont know the block internals but i do know head has BC retainers & springs, rocker arm stoppers,
New water pump
all lightweight pullies
Garret GT2871r .83
Isis Exhaust manifold
aftermarket throttle cable pully
RC 550 cc injectors
OBX top feed fuel rail
Tomei FPR
wraped manifold
Isis radiator with silicione hoses
ebay electric fan
Greddy FMIC with Greddy piping
HKS sequential BOV
Ikeya Formula sequential shifter (for an LS type 5 speed trans, needs base milled to fit sr20 trans)
harness from a RHD silvia
Switch panel with relays & fuses from 9k racing
Summit racing race harness mini fuse box w wires
Solenoid for oil pressure
Apexi Power FC with commander
Apexi Boost controller
3" full exhaust (ebay screamer pipe, downpipe)
1 piece aluminum driveshaft, weighted & balanced
+To make this buy a little more appetizing, coz i am asking for a lot, if someone gives me a solid offer for EVERYTHING, ill throw in a 2013, flat black Snap On tool box, in perfect shape. i believe its 5 drawer. Retails for just over $2000.
+ ill throw in 2 gallons of a Blue Metallic Imron paint. costs $300 a gallon, & the activator for it, $150. Pics below
Ill list more when i remember & go through receipts.
http://farm3.staticflickr.com/2864/9725298397_cf2d37cf81_c.jpg
http://farm6.staticflickr.com/5509/9725273199_a983bcf149.jpg
http://farm4.staticflickr.com/3778/9728527328_c5c9c8f7db_c.jpg
http://farm3.staticflickr.com/2826/9725273279_d629a87ce2.jpg
http://farm9.staticflickr.com/8346/8230512393_edbd961133_z.jpg[/url]
http://farm8.staticflickr.com/7296/9728501850_734e3bc6a2.jpg
http://farm6.staticflickr.com/5516/9728501996_8fea5c6c86.jpg[/url]
http://farm3.staticflickr.com/2882/9725273615_97baa327a9.jpg[/url]
http://farm4.staticflickr.com/3737/9728501918_915953b3ef.jpg[/url]
http://farm4.staticflickr.com/3673/9725298365_785860b042_c.jpg[/url]
http://farm8.staticflickr.com/7438/9728527292_212bfeac90_c.jpg[/url]
http://farm9.staticflickr.com/8097/8538226298_aa3c5c3b3c.jpg[/url]