s13 jdmcc help!! (inside)

[rhdsilvi85]

ok, so new knowledge found... so I have an s13 with jdm wiring, just realized I have a anologe subharness :( fml I thought it was the jdm digital cc harness so my question do I need to go and re get the digital harness? or can I make due with what I have and do some depin and moving of wires to make work? I have another jdm cc digital harness but its trashed so i'd have to redo all the wiring on it to make it work..

thanks guys

this is a link to what my harness looks like

http://hardtuned.net/forums/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=324689

[Mikester]

^^So essentially, what you're saying is that when you provided the system a ground, things started working... If I were you, I'd make sure all the grounds are good.

[rhdsilvi85]

well that's the thing unless a ground is wire is bad.. I rechecked my grounds ground down the spots they were located at... I mean physically the jdmcc is showing everything the way it supposed to but yet doesn't work function wise..

[rhdsilvi85]

before it just didn't even work lol

[rhdsilvi85]

do you know if the fsm for s14 digital is same as s13? ive been trying to find wiring diagrams but have been having a lot of issues since it's the real 180sx wiring

[Mikester]

There is:

Blower motor resistor
Sunload sensor
Blend door actuator
Ambient air temp sensor
Cabin temp sensor

I assume you have it all?

Wiglle the wires near the backs of all the connections... Maybe something is tweaked.

[rhdsilvi85]

ill have to check that and continuity at the grounds to make sure there isn't a bad ground some where

[rhdsilvi85]

new info please read top.. need help :)

[rhdsilvi85]

any one have good pics of their jdmcc wiring subharness Im going to rewire mine... I have a jdmcc one that is bad so I need to see color codes to rewire